lkml.org 
[lkml]   [2016]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/4] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver
From
Date
On 03/09/16 18:12, Jonathan Cameron wrote:
> On 15/08/16 16:28, Jonathan Cameron wrote:
>> On 01/08/16 10:54, Enric Balletbo i Serra wrote:
>>> Handle 3d contiguous sensors like Accelerometers, Gyroscope and
>>> Magnetometer that are presented by the ChromeOS EC Sensor hub.
>>>
>>> Signed-off-by: Guenter Roeck <groeck@chromium.org>
>>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>> Reviewed-by: Jonathan Cameron <jic23@kernel.org>
>>
>> Again, fine if this goes via mfd.
> A bit of white space fun that I cleaned up in the previous patch
> made this interesting to apply but think I got it right
> (there was an extra blank line at the end of the Kconfig)
>
> Thanks,
>
> Jonathan
>>
>> Thanks,
>>
>> Jonathan
>>> ---
>>>
>>> Changes since v3:
>>> - Remove some useless initialitzations as always overwritten.
>>> - Convert calib structure to a simple array.
>>> Changes since v2:
>>> - Fix some typos
>>> - Skip filling by zero structure parameters that already zero'd.
>>> - Order includes alphabetically.
>>> - Propagate error codes.
>>> Changes since v1:
>>> - Fixup multiline comments.
>>> - Fix some spelling mistakes.
>>> - Blank line before return statements.
>>> - Add CROS_EC_SENSORS_ prefix.
>>>
>>> drivers/iio/common/cros_ec_sensors/Kconfig | 8 +
>>> drivers/iio/common/cros_ec_sensors/Makefile | 1 +
>>> .../iio/common/cros_ec_sensors/cros_ec_sensors.c | 322 +++++++++++++++++++++
>>> 3 files changed, 331 insertions(+)
>>> create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>>>
>>> diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
>>> index 24743be..980bea2 100644
>>> --- a/drivers/iio/common/cros_ec_sensors/Kconfig
>>> +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
>>> @@ -12,3 +12,11 @@ config IIO_CROS_EC_SENSORS_CORE
>>> drivers.
>>> Define common attributes and sysfs interrupt handler.
>>>
>>> +config IIO_CROS_EC_SENSORS
>>> + tristate "ChromeOS EC Contiguous Sensors"
>>> + select IIO_CROS_EC_SENSORS_CORE
A quick build test showed this was a problem as
IIO_CROS_EC_SENSORS_CORE has some depends lines...

Need to select any of those not forced to be there
by having access to this signal (so should be fine for IIO and SYSFS).

I've fixed up (I think!) - please confirm
(I'll send a note about which branch this is all in shortly)

Jonathan


>>> + help
>>> + Module to handle 3d contiguous sensors like
>>> + Accelerometers, Gyroscope and Magnetometer that are
>>> + presented by the ChromeOS EC Sensor hub.
>>> + Creates an IIO device for each functions.
>>> diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
>>> index 95b6901..ec716ff 100644
>>> --- a/drivers/iio/common/cros_ec_sensors/Makefile
>>> +++ b/drivers/iio/common/cros_ec_sensors/Makefile
>>> @@ -3,3 +3,4 @@
>>> #
>>>
>>> obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
>>> +obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
>>> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>>> new file mode 100644
>>> index 0000000..48edeba
>>> --- /dev/null
>>> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>>> @@ -0,0 +1,322 @@
>>> +/*
>>> + * cros_ec_sensors - Driver for Chrome OS Embedded Controller sensors.
>>> + *
>>> + * Copyright (C) 2016 Google, Inc
>>> + *
>>> + * This software is licensed under the terms of the GNU General Public
>>> + * License version 2, as published by the Free Software Foundation, and
>>> + * may be copied, distributed, and modified under those terms.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * This driver uses the cros-ec interface to communicate with the Chrome OS
>>> + * EC about sensors data. Data access is presented through iio sysfs.
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/device.h>
>>> +#include <linux/iio/buffer.h>
>>> +#include <linux/iio/iio.h>
>>> +#include <linux/iio/kfifo_buf.h>
>>> +#include <linux/iio/trigger_consumer.h>
>>> +#include <linux/iio/triggered_buffer.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/mfd/cros_ec.h>
>>> +#include <linux/mfd/cros_ec_commands.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/sysfs.h>
>>> +
>>> +#include "cros_ec_sensors_core.h"
>>> +
>>> +#define CROS_EC_SENSORS_MAX_CHANNELS 4
>>> +
>>> +/* State data for ec_sensors iio driver. */
>>> +struct cros_ec_sensors_state {
>>> + /* Shared by all sensors */
>>> + struct cros_ec_sensors_core_state core;
>>> +
>>> + struct iio_chan_spec channels[CROS_EC_SENSORS_MAX_CHANNELS];
>>> +};
>>> +
>>> +static int cros_ec_sensors_read(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan,
>>> + int *val, int *val2, long mask)
>>> +{
>>> + struct cros_ec_sensors_state *st = iio_priv(indio_dev);
>>> + s16 data = 0;
>>> + s64 val64;
>>> + int i;
>>> + int ret = IIO_VAL_INT;
>>> + int idx = chan->scan_index;
>>> +
>>> + mutex_lock(&st->core.cmd_lock);
>>> +
>>> + switch (mask) {
>>> + case IIO_CHAN_INFO_RAW:
>>> + ret = st->core.read_ec_sensors_data(indio_dev, 1 << idx, &data);
>>> + if (ret < 0)
>>> + break;
>>> +
>>> + *val = data;
>>> + break;
>>> + case IIO_CHAN_INFO_CALIBBIAS:
>>> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
>>> + st->core.param.sensor_offset.flags = 0;
>>> +
>>> + ret = cros_ec_motion_send_host_cmd(&st->core, 0);
>>> + if (ret < 0)
>>> + break;
>>> +
>>> + /* Save values */
>>> + for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
>>> + st->core.calib[i] =
>>> + st->core.resp->sensor_offset.offset[i];
>>> +
>>> + *val = st->core.calib[idx];
>>> + break;
>>> + case IIO_CHAN_INFO_SCALE:
>>> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
>>> + st->core.param.sensor_range.data = EC_MOTION_SENSE_NO_VALUE;
>>> +
>>> + ret = cros_ec_motion_send_host_cmd(&st->core, 0);
>>> + if (ret < 0)
>>> + break;
>>> +
>>> + val64 = st->core.resp->sensor_range.ret;
>>> + switch (st->core.type) {
>>> + case MOTIONSENSE_TYPE_ACCEL:
>>> + /*
>>> + * EC returns data in g, iio exepects m/s^2.
>>> + * Do not use IIO_G_TO_M_S_2 to avoid precision loss.
>>> + */
>>> + *val = div_s64(val64 * 980665, 10);
>>> + *val2 = 10000 << (CROS_EC_SENSOR_BITS - 1);
>>> + ret = IIO_VAL_FRACTIONAL;
>>> + break;
>>> + case MOTIONSENSE_TYPE_GYRO:
>>> + /*
>>> + * EC returns data in dps, iio expects rad/s.
>>> + * Do not use IIO_DEGREE_TO_RAD to avoid precision
>>> + * loss. Round to the nearest integer.
>>> + */
>>> + *val = div_s64(val64 * 314159 + 9000000ULL, 1000);
>>> + *val2 = 18000 << (CROS_EC_SENSOR_BITS - 1);
>>> + ret = IIO_VAL_FRACTIONAL;
>>> + break;
>>> + case MOTIONSENSE_TYPE_MAG:
>>> + /*
>>> + * EC returns data in 16LSB / uT,
>>> + * iio expects Gauss
>>> + */
>>> + *val = val64;
>>> + *val2 = 100 << (CROS_EC_SENSOR_BITS - 1);
>>> + ret = IIO_VAL_FRACTIONAL;
>>> + break;
>>> + default:
>>> + ret = -EINVAL;
>>> + }
>>> + break;
>>> + default:
>>> + ret = cros_ec_sensors_core_read(&st->core, chan, val, val2,
>>> + mask);
>>> + break;
>>> + }
>>> + mutex_unlock(&st->core.cmd_lock);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int cros_ec_sensors_write(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan,
>>> + int val, int val2, long mask)
>>> +{
>>> + struct cros_ec_sensors_state *st = iio_priv(indio_dev);
>>> + int i;
>>> + int ret = 0;
>>> + int idx = chan->scan_index;
>>> +
>>> + mutex_lock(&st->core.cmd_lock);
>>> +
>>> + switch (mask) {
>>> + case IIO_CHAN_INFO_CALIBBIAS:
>>> + st->core.calib[idx] = val;
>>> +
>>> + /* Send to EC for each axis, even if not complete */
>>> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
>>> + st->core.param.sensor_offset.flags =
>>> + MOTION_SENSE_SET_OFFSET;
>>> + for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++)
>>> + st->core.param.sensor_offset.offset[i] =
>>> + st->core.calib[i];
>>> + st->core.param.sensor_offset.temp =
>>> + EC_MOTION_SENSE_INVALID_CALIB_TEMP;
>>> +
>>> + ret = cros_ec_motion_send_host_cmd(&st->core, 0);
>>> + break;
>>> + case IIO_CHAN_INFO_SCALE:
>>> + if (st->core.type == MOTIONSENSE_TYPE_MAG) {
>>> + ret = -EINVAL;
>>> + break;
>>> + }
>>> + st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
>>> + st->core.param.sensor_range.data = val;
>>> +
>>> + /* Always roundup, so caller gets at least what it asks for. */
>>> + st->core.param.sensor_range.roundup = 1;
>>> +
>>> + ret = cros_ec_motion_send_host_cmd(&st->core, 0);
>>> + break;
>>> + default:
>>> + ret = cros_ec_sensors_core_write(
>>> + &st->core, chan, val, val2, mask);
>>> + break;
>>> + }
>>> +
>>> + mutex_unlock(&st->core.cmd_lock);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static const struct iio_info ec_sensors_info = {
>>> + .read_raw = &cros_ec_sensors_read,
>>> + .write_raw = &cros_ec_sensors_write,
>>> + .driver_module = THIS_MODULE,
>>> +};
>>> +
>>> +static int cros_ec_sensors_probe(struct platform_device *pdev)
>>> +{
>>> + struct device *dev = &pdev->dev;
>>> + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
>>> + struct cros_ec_device *ec_device;
>>> + struct iio_dev *indio_dev;
>>> + struct cros_ec_sensors_state *state;
>>> + struct iio_chan_spec *channel;
>>> + int ret, i;
>>> +
>>> + if (!ec_dev || !ec_dev->ec_dev) {
>>> + dev_warn(&pdev->dev, "No CROS EC device found.\n");
>>> + return -EINVAL;
>>> + }
>>> + ec_device = ec_dev->ec_dev;
>>> +
>>> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
>>> + if (!indio_dev)
>>> + return -ENOMEM;
>>> +
>>> + ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + indio_dev->info = &ec_sensors_info;
>>> + state = iio_priv(indio_dev);
>>> + for (channel = state->channels, i = CROS_EC_SENSOR_X;
>>> + i < CROS_EC_SENSOR_MAX_AXIS; i++, channel++) {
>>> + /* Common part */
>>> + channel->info_mask_separate =
>>> + BIT(IIO_CHAN_INFO_RAW) |
>>> + BIT(IIO_CHAN_INFO_CALIBBIAS);
>>> + channel->info_mask_shared_by_all =
>>> + BIT(IIO_CHAN_INFO_SCALE) |
>>> + BIT(IIO_CHAN_INFO_FREQUENCY) |
>>> + BIT(IIO_CHAN_INFO_SAMP_FREQ);
>>> + channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
>>> + channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
>>> + channel->scan_index = i;
>>> + channel->ext_info = cros_ec_sensors_ext_info;
>>> + channel->modified = 1;
>>> + channel->channel2 = IIO_MOD_X + i;
>>> + channel->scan_type.sign = 's';
>>> +
>>> + /* Sensor specific */
>>> + switch (state->core.type) {
>>> + case MOTIONSENSE_TYPE_ACCEL:
>>> + channel->type = IIO_ACCEL;
>>> + break;
>>> + case MOTIONSENSE_TYPE_GYRO:
>>> + channel->type = IIO_ANGL_VEL;
>>> + break;
>>> + case MOTIONSENSE_TYPE_MAG:
>>> + channel->type = IIO_MAGN;
>>> + break;
>>> + default:
>>> + dev_err(&pdev->dev, "Unknown motion sensor\n");
>>> + return -EINVAL;
>>> + }
>>> + }
>>> +
>>> + /* Timestamp */
>>> + channel->type = IIO_TIMESTAMP;
>>> + channel->channel = -1;
>>> + channel->scan_index = CROS_EC_SENSOR_MAX_AXIS;
>>> + channel->scan_type.sign = 's';
>>> + channel->scan_type.realbits = 64;
>>> + channel->scan_type.storagebits = 64;
>>> +
>>> + indio_dev->channels = state->channels;
>>> + indio_dev->num_channels = CROS_EC_SENSORS_MAX_CHANNELS;
>>> +
>>> + /* There is only enough room for accel and gyro in the io space */
>>> + if ((state->core.ec->cmd_readmem != NULL) &&
>>> + (state->core.type != MOTIONSENSE_TYPE_MAG))
>>> + state->core.read_ec_sensors_data = cros_ec_sensors_read_lpc;
>>> + else
>>> + state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
>>> +
>>> + ret = iio_triggered_buffer_setup(indio_dev, NULL,
>>> + cros_ec_sensors_capture, NULL);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = iio_device_register(indio_dev);
>>> + if (ret)
>>> + goto error_uninit_buffer;
>>> +
>>> + return 0;
>>> +
>>> +error_uninit_buffer:
>>> + iio_triggered_buffer_cleanup(indio_dev);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int cros_ec_sensors_remove(struct platform_device *pdev)
>>> +{
>>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>> +
>>> + iio_device_unregister(indio_dev);
>>> + iio_triggered_buffer_cleanup(indio_dev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct platform_device_id cros_ec_sensors_ids[] = {
>>> + {
>>> + .name = "cros-ec-accel",
>>> + },
>>> + {
>>> + .name = "cros-ec-gyro",
>>> + },
>>> + {
>>> + .name = "cros-ec-mag",
>>> + },
>>> + { /* sentinel */ }
>>> +};
>>> +MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
>>> +
>>> +static struct platform_driver cros_ec_sensors_platform_driver = {
>>> + .driver = {
>>> + .name = "cros-ec-sensors",
>>> + },
>>> + .probe = cros_ec_sensors_probe,
>>> + .remove = cros_ec_sensors_remove,
>>> + .id_table = cros_ec_sensors_ids,
>>> +};
>>> +module_platform_driver(cros_ec_sensors_platform_driver);
>>> +
>>> +MODULE_DESCRIPTION("ChromeOS EC 3-axis sensors driver");
>>> +MODULE_LICENSE("GPL v2");
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

\
 
 \ /
  Last update: 2016-10-25 19:13    [W:0.098 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site