lkml.org 
[lkml]   [2016]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] usb: musb: da8xx: Only execute the OTG workaround when phy in OTG mode
Date
When the phy is forced in host mode, only the first hot plug and
hot remove works. That is actually because the driver execute the
OTG workaround, whereas it is not applicable in host or device mode.
Indeed, to work correctly, the VBUS sense and session end comparator
must be enabled, what is only possible when the phy is in OTG mode.
Only execute the workaround if the phy is in OTG mode.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
drivers/usb/musb/da8xx.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index ec93602..be10c51 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -145,6 +145,17 @@ static void otg_timer(unsigned long _musb)
unsigned long flags;

/*
+ * We should only execute the OTG workaround when the phy is in OTG
+ * mode. The workaround require the VBUS sense and the session end
+ * comparator to be enabled, what is only possible if the phy is in
+ * OTG mode. As the workaround is only required to detect if the
+ * controller must act as host or device, we can safely exit OTG is
+ * not in use.
+ */
+ if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
+ return;
+
+ /*
* We poll because DaVinci's won't expose several OTG-critical
* status change events (from the transceiver) otherwise.
*/
--
2.7.3
\
 
 \ /
  Last update: 2016-10-25 15:53    [W:0.075 / U:2.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site