lkml.org 
[lkml]   [2016]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] serial: core: fix console problems on uart_close
On Tue, Oct 25, 2016 at 7:55 AM, Mike Galbraith
<umgwanakikbuti@gmail.com> wrote:
> On Tue, 2016-10-25 at 12:40 +0200, Geert Uytterhoeven wrote:
>
>> Mike: I see you are using a PC, while I'm using an ARM board (with DT).
>> Are you using a serial console? If yes, what's the value of port->console
>> before and after the call to uart_console() that Rob's patch below removes?
>
> Well, it's a bit larger than the average PC, it's a 64 core HP DL980,
> and my console is its virtual serial port.
>
> [ 15.217487] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
> [ 15.228212] MIKE port:ffff880276400000 port->console:0
> [ 15.240889] MIKE port:ffff880276400000 port->console:0
> [ 15.269606] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> [ 15.282538] MIKE port:ffff8802764001a8 port->console:0
> [ 15.293195] MIKE port:ffff8802764001a8 port->console:1
> [ 15.322806] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> (30 more calls, all 0 pre 0 post)
>
> That's with the below from Jiri Slaby applied to quell the reboot time
> explosion.

This alone is enough to fix things for you?

Rob

\
 
 \ /
  Last update: 2016-10-25 15:26    [W:0.052 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site