lkml.org 
[lkml]   [2016]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/9] mtd: spi-nor: improve macronix_quad_enable()
From
Date
Hi Marek,

Le 25/10/2016 à 00:00, Marek Vasut a écrit :
> On 10/24/2016 06:34 PM, Cyrille Pitchen wrote:
>> The patch checks whether the Quad Enable bit is already set in the Status
>> Register. If so, the function exits immediately with a successful return
>> code. Otherwise, a message is now printed telling we're setting the
>> non-volatile bit.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>> Reviewed-by: Jagan Teki <jagan@openedev.com>
>> ---
>> drivers/mtd/spi-nor/spi-nor.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index d0fc165d7d66..5c87b2d99507 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -1211,6 +1211,11 @@ static int macronix_quad_enable(struct spi_nor *nor)
>> val = read_sr(nor);
>> if (val < 0)
>> return val;
>> + if (val & SR_QUAD_EN_MX)
>> + return 0;
>> +
>> + /* Update the Quad Enable bit. */
>> + dev_info(nor->dev, "setting Macronix Quad Enable (non-volatile) bit\n");
>
> Should probably be dev_dbg(), since this is just churn in the kernel
> log. The user doesn't care and the developer can just up the debug level
> or add his own printk .
>

The Quad Enable bit is non-volatile so this trace should be printed only once
but I'm perfectly fine with using dev_dbg(). I'll change it in the next version.

Best regards,

Cyrille

>> write_enable(nor);
>>
>> write_sr(nor, val | SR_QUAD_EN_MX);
>>
>
>

\
 
 \ /
  Last update: 2016-10-25 10:53    [W:0.177 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site