Messages in this thread |  | | Subject | Re: [PATCH v2 8/8] ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge | From | Archit Taneja <> | Date | Tue, 25 Oct 2016 13:43:33 +0530 |
| |
On 10/20/2016 09:13 AM, Chen-Yu Tsai wrote: > The Hummingbird A31 board has a RGB-to-VGA bridge which converts RGB > output from the LCD interface to VGA signals. > > Enable this part of the display pipeline.
I couldn't find the enable-gpios binding for the bridge that you introduced in the previous patch. Is that intentional?
Thanks, Archit
> > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 56 +++++++++++++++++++++++++++++ > 1 file changed, 56 insertions(+) > > diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts > index 9a74637f677f..05a49b2147f1 100644 > --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts > +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts > @@ -63,6 +63,49 @@ > stdout-path = "serial0:115200n8"; > }; > > + bridge { > + compatible = "dumb-vga-dac"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + vga_bridge_in: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&tcon0_out_vga>; > + }; > + }; > + > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + vga_bridge_out: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&vga_con_in>; > + }; > + }; > + }; > + }; > + > + vga { > + compatible = "vga-connector"; > + > + port { > + vga_con_in: endpoint { > + remote-endpoint = <&vga_bridge_out>; > + }; > + }; > + }; > + > wifi_pwrseq: wifi_pwrseq { > compatible = "mmc-pwrseq-simple"; > reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ > @@ -245,6 +288,19 @@ > status = "okay"; > }; > > +&tcon0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&lcd0_rgb888_pins>; > + status = "okay"; > +}; > + > +&tcon0_out { > + tcon0_out_vga: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&vga_bridge_in>; > + }; > +}; > + > &uart0 { > pinctrl-names = "default"; > pinctrl-0 = <&uart0_pins_a>; >
-- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
|  |