lkml.org 
[lkml]   [2016]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/9] mtd: spi-nor: improve macronix_quad_enable()
From
Date
On 10/24/2016 06:34 PM, Cyrille Pitchen wrote:
> The patch checks whether the Quad Enable bit is already set in the Status
> Register. If so, the function exits immediately with a successful return
> code. Otherwise, a message is now printed telling we're setting the
> non-volatile bit.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
> Reviewed-by: Jagan Teki <jagan@openedev.com>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d0fc165d7d66..5c87b2d99507 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1211,6 +1211,11 @@ static int macronix_quad_enable(struct spi_nor *nor)
> val = read_sr(nor);
> if (val < 0)
> return val;
> + if (val & SR_QUAD_EN_MX)
> + return 0;
> +
> + /* Update the Quad Enable bit. */
> + dev_info(nor->dev, "setting Macronix Quad Enable (non-volatile) bit\n");

Should probably be dev_dbg(), since this is just churn in the kernel
log. The user doesn't care and the developer can just up the debug level
or add his own printk .

> write_enable(nor);
>
> write_sr(nor, val | SR_QUAD_EN_MX);
>


--
Best regards,
Marek Vasut

\
 
 \ /
  Last update: 2016-10-25 00:09    [W:0.849 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site