lkml.org 
[lkml]   [2016]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
From
Date
Hi Jonathan,

> Am 23.10.2016 um 21:00 schrieb Jonathan Cameron <jic23@kernel.org>:
>
> On 23/10/16 19:34, H. Nikolaus Schaller wrote:
>> Hi Jonathan,
>>
>>> Am 23.10.2016 um 11:57 schrieb H. Nikolaus Schaller <hns@goldelico.com>:
>>>
>>> Hi,
>>>
>>>>> +static int tsc2007_alloc(struct i2c_client *client, struct tsc2007 **ts,
>>>>> + struct input_dev **input_dev)
>>>>> +{
>>>>> + int err;
>>>>> + struct iio_dev *indio_dev;
>>>>> +
>>>>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*ts));
>>>> Instead of doing this to reduce the delta between versions make
>>>> iio_priv a struct tsc2007 **
>>>>
>>>> That is have a single pointer in there and do your allocation of struct
>>>> tsc2007 separately.
>>>
>>> Sorry, but I think I do not completely understand what you mean here.
>>>
>>> The problem is that we need to allocate some struct tsc2007 in both cases.
>>> But in one case managed directly by &client->dev and in the other managed
>>> indirectly. This is why I use the private area of struct iio_dev to store
>>> the full struct tsc2007 and not just a pointer.
>>
>> Ok, I think I finally did understand how you mean this and have started to
>> implement something.
>>
> oops. Didn't look on in my emails to get to this one!
>> The idea is to have one alloc function to return a struct tsc2007. This
>> can be part of the probe function, like it is in the unpatched driver.
>>
>> In case of iio this struct tsc2007 is also allocated explicitly so that
>> a pointer can be stored in iio_priv.
>>
>> This just means an additional iio_priv->ts = devm_kzalloc() in case of iio.
>>
>> I have added that approach to my inlined patch and it seems to work (attached).
>>
>> Sorry if I do not use the wording you would use and sometimes overlook
>> something you have said. I feel here like moving on thin ice and doing
>> guesswork about unspoken assumptions...
> That's fine. Stuff that can appear obvious to one person is not
> necessarily obvious to another!
>>
>>>
>>>>
>>>> Having doing that, you can have this CONFIG_IIO block as just
>>>> doing the iio stuff with the input elements pulled back into the main
>>>> probe function.
>>>>
>>>> Then define something like
>>>>
>>>> iio_configure (stubbed to nothing if no IIO)
>>>> and
>>>> iio_unconfigure (also stubbed to nothing if no IIO).
>>
>> This seems to work (draft attached).
>>
>>>>
>>>> A couple of additions in the header
>>
>> I think you mean tsc2007.h?
> Nope. A local header alongside the driver is what you want for this stuff.
> driver/input/tsc2007.h
>>
>> This currently contains only platform data and could IMHO be eliminated
>> if everything becomes DT.
>>
>>>> to make it all work
>>>> (the struct tsc2007 and tsc2007_xfer() + a few of the
>>>> register defines..
>>
>> Here it appears to me that I have to make a lot of so far private static
>> and even static inline functions public so that I can make them stubs and
>> call them from tsc2007_iio.c.
> There will be a few.
>>
>> And for having proper parameter types I have to make most private structs
>> also public.
> Yes a few of those as well.
>>
>> I really like the idea to have the optional iio feature in a separate source
>> file, but when really starting to write code, I get the impression that
>> it introduces more problems than it solves.
>>
>> And I wonder a little why it is not done for #ifdef CONFIG_OF in tsc2007.c
>> as well. There are also two static function in some #ifdef #else # endif
>> and not going through stubs.
> Usually it is only done once a certain volume of code exists.
>>
>> So is this intended to give up some static definitions?
> Yes, that happens the moment you have multiple source files.
>
> Some losses but generally end up with clean code separation. Always a trade
> off unfortunately. Pity we can't just insist IIO is available! Rather large
> to pull in for what is probable a niche use case.
>
> Below is definitely heading in the right direction. I remember vaguely being
> convinced of the worth of doing this when optional code is involved!
> (was a good while ago now)
>
> Jonathan
>>
>> BR and thanks,
>> Nikolaus
>>
>> diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
>> index 5e3c4bf..92da8f6 100644
>> --- a/drivers/input/touchscreen/tsc2007.c
>> +++ b/drivers/input/touchscreen/tsc2007.c
>> @@ -30,6 +30,7 @@
>> #include <linux/of.h>
>> #include <linux/of_gpio.h>
>> #include <linux/input/touchscreen.h>
>> +#include <linux/iio/iio.h>
> Should not need this after introducing the new file. Will only be
> needed in the iio specific .c file.
>>
>> #define TSC2007_MEASURE_TEMP0 (0x0 << 4)
>> #define TSC2007_MEASURE_AUX (0x2 << 4)
>> @@ -98,6 +99,9 @@ struct tsc2007 {
> This will definitely need to go in the header though.

Now I have split the code into:

tsc2007.h (constants, structs and stubs)
tsc2007_iio.c (the iio stuff)
tsc2007.c (most parts of the original driver)

but I have a problem of correctly modifying the Makefile.

It currently looks like:

obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_IIO) += tsc2007_iio.o

We have configured CONFIG_TOUCHSCREEN_TSC2007=m and CONFIG_IIO=y.

This obviously compiles tsc2007_iio.o into the kernel.

This means that tsc2007_iio.o references tsc2007_xfer which is part of
the module.

I would like to get both linked into the module, but the iio part
obviously only if CONFIG_IIO is defined (either -y or -m).

How can I define this?

Or can I define

obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o tsc2007_iio.o

and embrace all code in tsc2007_iio with a big #ifdef CONFIG_IIO
so that it is compiled into an empty object file in the non-iio case?

BR and thanks,
Nikolaus

\
 
 \ /
  Last update: 2016-10-24 21:19    [W:0.073 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site