On Wed, Oct 5, 2016 at 5:30 PM, Cyrille Pitchen
<cyrille.pitchen@atmel.com> wrote:
> The patch checks whether the Quad Enable bit is already set in the Status
> Register. If so, the function exits immediately with a successful return
> code. Otherwise, a message is now printed telling we're setting the
> non-volatile bit.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>

Reviewed-by: Jagan Teki <jagan@openedev.com>

> ---
>  drivers/mtd/spi-nor/spi-nor.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d0fc165d7d66..5c87b2d99507 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1211,6 +1211,11 @@ static int macronix_quad_enable(struct spi_nor *nor)
>         val = read_sr(nor);
>         if (val < 0)
>                 return val;
> +       if (val & SR_QUAD_EN_MX)
> +               return 0;
> +
> +       /* Update the Quad Enable bit. */
> +       dev_info(nor->dev, "setting Macronix Quad Enable (non-volatile) bit\n");
>         write_enable(nor);
>
>         write_sr(nor, val | SR_QUAD_EN_MX);

Safe to save ret and check the same as well.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.