lkml.org 
[lkml]   [2016]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] i2c: rk3x: Give the tuning value 0 during rk3x_i2c_v0_calc_timings
Date
We found a bug that i2c transfer sometimes failed on 3066a board with
stabel-4.8, the con register would be updated by uninitialized tuning
value, it made the i2c transfer failed.

So give the tuning value to be zero during rk3x_i2c_v0_calc_timings.

Signed-off-by: David Wu <david.wu@rock-chips.com>
---
drivers/i2c/busses/i2c-rk3x.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 50702c7..df22066 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -694,6 +694,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
t_calc->div_low--;
t_calc->div_high--;

+ /* Give the tuning value 0, that would not update con register */
+ t_calc->tuning = 0;
/* Maximum divider supported by hw is 0xffff */
if (t_calc->div_low > 0xffff) {
t_calc->div_low = 0xffff;
--
1.9.1

\
 
 \ /
  Last update: 2016-10-22 10:45    [W:0.061 / U:1.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site