lkml.org 
[lkml]   [2016]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 4/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature
From
Date
On 17/10/16 14:57, H. Nikolaus Schaller wrote:
> The tsc2007 chip not only has a resistive touch screen controller but
> also an external AUX adc imput which can be used for an ambient
> light sensor, battery voltage monitoring or any general purpose.
>
> Additionally it can measure the chip temperature.
>
> This extension provides an iio interface for these adc channels.
>
> Since it is not wasting much resources and is very straightforward,
> we simply provide all other adc channels as optional iio interfaces
> as weel. This can be used for debugging or special applications.
well
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
This could be cleaner done perhaps by factoring out the IIO stuff into a separate
file and using a header with stubs to deal with the no available case.

There will only be a handful of stubs and it'll give you a lot cleaner code
in here.

If def fun in .c files is always harder to deal with than in a header
where stubs are really obvious.

J
> ---
> drivers/input/touchscreen/tsc2007.c | 151 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 150 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
> index c314331..b4a9504 100644
> --- a/drivers/input/touchscreen/tsc2007.c
> +++ b/drivers/input/touchscreen/tsc2007.c
> @@ -30,6 +30,7 @@
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> #include <linux/input/touchscreen.h>
> +#include <linux/iio/iio.h>
>
> #define TSC2007_MEASURE_TEMP0 (0x0 << 4)
> #define TSC2007_MEASURE_AUX (0x2 << 4)
> @@ -61,6 +62,16 @@
> #define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X)
> #define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
>
> +#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \
> +{ \
> + .datasheet_name = _name, \
> + .type = _type, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(_chan_info), \
> + .indexed = 1, \
> + .channel = _chan, \
> +}
> +
> struct ts_event {
> u16 x;
> u16 y;
> @@ -69,9 +80,13 @@ struct ts_event {
>
> struct tsc2007 {
> struct input_dev *input;
> +#ifdef CONFIG_IIO
> + struct iio_dev *indio;
> +#endif
> char phys[32];
>
> struct i2c_client *client;
> + struct mutex mlock;
>
> u16 model;
> u16 x_plate_ohms;
> @@ -192,7 +207,10 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
> while (!ts->stopped && tsc2007_is_pen_down(ts)) {
>
> /* pen is down, continue with the measurement */
> +
> + mutex_lock(&ts->mlock);
> tsc2007_read_values(ts, &tc);
> + mutex_unlock(&ts->mlock);
>
> rt = tsc2007_calculate_resistance(ts, &tc);
>
> @@ -319,6 +337,89 @@ static void tsc2007_close(struct input_dev *input_dev)
> tsc2007_stop(ts);
> }
>
> +#ifdef CONFIG_IIO
> +
> +static const struct iio_chan_spec tsc2007_iio_channel[] = {
> + TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /* Ohms? */
> + TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
> + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
> +};
> +
> +static int tsc2007_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val, int *val2, long mask)
> +{
> + struct tsc2007 *tsc = iio_priv(indio_dev);
> + int adc_chan = chan->channel;
> + int ret = 0;
> +
> + if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
> + return -EINVAL;
> +
> + if (mask != IIO_CHAN_INFO_RAW)
> + return -EINVAL;
> +
> + mutex_lock(&tsc->mlock);
> +
> + switch (chan->channel) {
> + case 0:
> + *val = tsc2007_xfer(tsc, READ_X);
> + break;
> + case 1:
> + *val = tsc2007_xfer(tsc, READ_Y);
> + break;
> + case 2:
> + *val = tsc2007_xfer(tsc, READ_Z1);
> + break;
> + case 3:
> + *val = tsc2007_xfer(tsc, READ_Z2);
> + break;
> + case 4:
> + *val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));
> + break;
> + case 5: {
> + struct ts_event tc;
> +
> + tc.x = tsc2007_xfer(tsc, READ_X);
> + tc.z1 = tsc2007_xfer(tsc, READ_Z1);
> + tc.z2 = tsc2007_xfer(tsc, READ_Z2);
> + *val = tsc2007_calculate_resistance(tsc, &tc);
> + break;
> + }
> + case 6:
> + *val = tsc2007_is_pen_down(tsc);
> + break;
> + case 7:
> + *val = tsc2007_xfer(tsc,
> + (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));
> + break;
> + case 8:
> + *val = tsc2007_xfer(tsc,
> + (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));
> + break;
> + }
> +
> + /* Prepare for next touch reading - power down ADC, enable PENIRQ */
> + tsc2007_xfer(tsc, PWRDOWN);
> +
> + mutex_unlock(&tsc->mlock);
> +
> + ret = IIO_VAL_INT;
> +
> + return ret;
> +}
> +
> +static const struct iio_info tsc2007_iio_info = {
> + .read_raw = tsc2007_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +#endif
> +
> #ifdef CONFIG_OF
> static int tsc2007_get_pendown_state_gpio(struct device *dev)
> {
> @@ -453,26 +554,56 @@ static int tsc2007_probe(struct i2c_client *client,
> const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
> struct tsc2007 *ts;
> struct input_dev *input_dev;
> +#ifdef CONFIG_IIO
> + struct iio_dev *indio_dev;
> +#endif
> int err;
>
> if (!i2c_check_functionality(client->adapter,
> I2C_FUNC_SMBUS_READ_WORD_DATA))
> return -EIO;
>
> +#ifdef CONFIG_IIO
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*ts));
> + if (!indio_dev) {
> + dev_err(&client->dev, "iio_device_alloc failed\n");
> + return -ENOMEM;
> + }
> +
> + ts = iio_priv(indio_dev);
> +#else
> ts = devm_kzalloc(&client->dev, sizeof(struct tsc2007), GFP_KERNEL);
> if (!ts)
> return -ENOMEM;
> -
> +#endif
> input_dev = devm_input_allocate_device(&client->dev);
> if (!input_dev)
> return -ENOMEM;
>
> i2c_set_clientdata(client, ts);
>
> +#ifdef CONFIG_IIO
> + indio_dev->name = "tsc2007";
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &tsc2007_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = tsc2007_iio_channel;
> + indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
> +
> + err = iio_device_register(indio_dev);
> + if (err < 0) {
> + dev_err(&client->dev, "iio_device_register() failed: %d\n",
> + err);
> + return err;
> + }
> + ts->indio = indio_dev;
> +#endif
> +
> ts->client = client;
> ts->irq = client->irq;
> ts->input = input_dev;
> init_waitqueue_head(&ts->wait);
> + mutex_init(&ts->mlock);
>
> snprintf(ts->phys, sizeof(ts->phys),
> "%s/input0", dev_name(&client->dev));
> @@ -543,7 +674,9 @@ static int tsc2007_probe(struct i2c_client *client,
> if (err < 0) {
> dev_err(&client->dev,
> "Failed to setup chip: %d\n", err);
> +#ifdef CONFIG_IIO
> iio_device_unregister(indio_dev);
> +#endif
> return err; /* usually, chip does not respond */
> }
>
> @@ -557,6 +690,21 @@ static int tsc2007_probe(struct i2c_client *client,
> return 0;
> }
>
> +static int tsc2007_remove(struct i2c_client *client)
> +{
> + struct tsc2007 *ts = i2c_get_clientdata(client);
> + struct input_dev *input_dev = ts->input;
> +#ifdef CONFIG_IIO
> + struct iio_dev *indio_dev = ts->indio;
> +#endif
> + input_unregister_device(input_dev);
> +
> +#ifdef CONFIG_IIO
> + iio_device_unregister(indio_dev);
> +#endif
> + return 0;
> +}
> +
> static const struct i2c_device_id tsc2007_idtable[] = {
> { "tsc2007", 0 },
> { }
> @@ -579,6 +727,7 @@ static struct i2c_driver tsc2007_driver = {
> },
> .id_table = tsc2007_idtable,
> .probe = tsc2007_probe,
> + .remove = tsc2007_remove,
> };
>
> module_i2c_driver(tsc2007_driver);
>

\
 
 \ /
  Last update: 2016-10-22 20:34    [W:0.222 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site