lkml.org 
[lkml]   [2016]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 5/8] PM / OPP: Add infrastructure to manage multiple regulators
Date
This patch adds infrastructure to manage multiple regulators and updates
the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator().

This is preparatory work for adding full support for devices with
multiple regulators.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/base/power/opp/core.c | 220 ++++++++++++++++++++++++++-------------
drivers/base/power/opp/debugfs.c | 48 +++++++--
drivers/base/power/opp/of.c | 102 +++++++++++++-----
drivers/base/power/opp/opp.h | 10 +-
drivers/cpufreq/cpufreq-dt.c | 9 +-
include/linux/pm_opp.h | 8 +-
6 files changed, 276 insertions(+), 121 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 37fad2eb0f47..45c70ce07864 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -93,6 +93,8 @@ struct opp_table *_find_opp_table(struct device *dev)
* Return: voltage in micro volt corresponding to the opp, else
* return 0
*
+ * This is useful only for devices with single power supply.
+ *
* Locking: This function must be called under rcu_read_lock(). opp is a rcu
* protected pointer. This means that opp which could have been fetched by
* opp_find_freq_{exact,ceil,floor} functions is valid as long as we are
@@ -112,7 +114,7 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
if (IS_ERR_OR_NULL(tmp_opp))
pr_err("%s: Invalid parameters\n", __func__);
else
- v = tmp_opp->supply.u_volt;
+ v = tmp_opp->supplies[0].u_volt;

return v;
}
@@ -222,10 +224,10 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
{
struct opp_table *opp_table;
struct dev_pm_opp *opp;
- struct regulator *reg;
+ struct regulator *reg, **regulators;
unsigned long latency_ns = 0;
- unsigned long min_uV = ~0, max_uV = 0;
- int ret;
+ unsigned long *min_uV, *max_uV;
+ int ret, size, i, count;

rcu_read_lock();

@@ -235,21 +237,44 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
return 0;
}

- reg = opp_table->regulator;
- if (IS_ERR(reg)) {
+ count = opp_table->regulator_count;
+
+ if (!count) {
/* Regulator may not be required for device */
rcu_read_unlock();
return 0;
}

- list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
- if (!opp->available)
- continue;
+ size = count * sizeof(*regulators);
+ regulators = kmemdup(opp_table->regulators, size, GFP_KERNEL);
+ if (!regulators) {
+ rcu_read_unlock();
+ return 0;
+ }
+
+ min_uV = kmalloc(count * (sizeof(*min_uV) + sizeof(*max_uV)),
+ GFP_KERNEL);
+ if (!min_uV) {
+ kfree(regulators);
+ rcu_read_unlock();
+ return 0;
+ }
+
+ max_uV = min_uV + count;
+
+ for (i = 0; i < count; i++) {
+ min_uV[i] = ~0;
+ max_uV[i] = 0;
+
+ list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
+ if (!opp->available)
+ continue;

- if (opp->supply.u_volt_min < min_uV)
- min_uV = opp->supply.u_volt_min;
- if (opp->supply.u_volt_max > max_uV)
- max_uV = opp->supply.u_volt_max;
+ if (opp->supplies[i].u_volt_min < min_uV[i])
+ min_uV[i] = opp->supplies[i].u_volt_min;
+ if (opp->supplies[i].u_volt_max > max_uV[i])
+ max_uV[i] = opp->supplies[i].u_volt_max;
+ }
}

rcu_read_unlock();
@@ -258,9 +283,14 @@ unsigned long dev_pm_opp_get_max_volt_latency(struct device *dev)
* The caller needs to ensure that opp_table (and hence the regulator)
* isn't freed, while we are executing this routine.
*/
- ret = regulator_set_voltage_time(reg, min_uV, max_uV);
- if (ret > 0)
- latency_ns = ret * 1000;
+ for (i = 0; reg = regulators[i], i < count; i++) {
+ ret = regulator_set_voltage_time(reg, min_uV[i], max_uV[i]);
+ if (ret > 0)
+ latency_ns += ret * 1000;
+ }
+
+ kfree(min_uV);
+ kfree(regulators);

return latency_ns;
}
@@ -580,7 +610,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
{
struct opp_table *opp_table;
struct dev_pm_opp *old_opp, *opp;
- struct regulator *reg;
+ struct regulator *reg = ERR_PTR(-ENXIO);
struct clk *clk;
unsigned long freq, old_freq;
struct dev_pm_opp_supply old_supply, new_supply;
@@ -633,14 +663,23 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
return ret;
}

+ if (opp_table->regulators) {
+ /* This function only supports single regulator per device */
+ if (WARN_ON(opp_table->regulator_count > 1)) {
+ dev_err(dev, "multiple regulators not supported\n");
+ rcu_read_unlock();
+ return -EINVAL;
+ }
+
+ reg = opp_table->regulators[0];
+ }
+
if (IS_ERR(old_opp))
old_supply.u_volt = 0;
else
- memcpy(&old_supply, &old_opp->supply, sizeof(old_supply));
+ memcpy(&old_supply, old_opp->supplies, sizeof(old_supply));

- memcpy(&new_supply, &opp->supply, sizeof(new_supply));
-
- reg = opp_table->regulator;
+ memcpy(&new_supply, opp->supplies, sizeof(new_supply));

rcu_read_unlock();

@@ -764,9 +803,6 @@ static struct opp_table *_add_opp_table(struct device *dev)

_of_init_opp_table(opp_table, dev);

- /* Set regulator to a non-NULL error value */
- opp_table->regulator = ERR_PTR(-ENXIO);
-
/* Find clk for the device */
opp_table->clk = clk_get(dev, NULL);
if (IS_ERR(opp_table->clk)) {
@@ -815,7 +851,7 @@ static void _remove_opp_table(struct opp_table *opp_table)
if (opp_table->prop_name)
return;

- if (!IS_ERR(opp_table->regulator))
+ if (opp_table->regulators)
return;

/* Release clk */
@@ -924,35 +960,49 @@ struct dev_pm_opp *_allocate_opp(struct device *dev,
struct opp_table **opp_table)
{
struct dev_pm_opp *opp;
+ int count, supply_size;
+ struct opp_table *table;

- /* allocate new OPP node */
- opp = kzalloc(sizeof(*opp), GFP_KERNEL);
- if (!opp)
+ table = _add_opp_table(dev);
+ if (!table)
return NULL;

- INIT_LIST_HEAD(&opp->node);
+ /* Allocate space for at least one supply */
+ count = table->regulator_count ? table->regulator_count : 1;
+ supply_size = sizeof(*opp->supplies) * count;

- *opp_table = _add_opp_table(dev);
- if (!*opp_table) {
- kfree(opp);
+ /* allocate new OPP node + and supplies structures */
+ opp = kzalloc(sizeof(*opp) + supply_size, GFP_KERNEL);
+ if (!opp) {
+ kfree(table);
return NULL;
}

+ opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+ INIT_LIST_HEAD(&opp->node);
+
+ *opp_table = table;
+
return opp;
}

static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
struct opp_table *opp_table)
{
- struct regulator *reg = opp_table->regulator;
-
- if (!IS_ERR(reg) &&
- !regulator_is_supported_voltage(reg, opp->supply.u_volt_min,
- opp->supply.u_volt_max)) {
- pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
- __func__, opp->supply.u_volt_min,
- opp->supply.u_volt_max);
- return false;
+ struct regulator *reg;
+ int i;
+
+ for (i = 0; i < opp_table->regulator_count; i++) {
+ reg = opp_table->regulators[i];
+
+ if (!regulator_is_supported_voltage(reg,
+ opp->supplies[i].u_volt_min,
+ opp->supplies[i].u_volt_max)) {
+ pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",
+ __func__, opp->supplies[i].u_volt_min,
+ opp->supplies[i].u_volt_max);
+ return false;
+ }
}

return true;
@@ -984,12 +1034,13 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,

/* Duplicate OPPs */
dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
- __func__, opp->rate, opp->supply.u_volt,
- opp->available, new_opp->rate, new_opp->supply.u_volt,
- new_opp->available);
+ __func__, opp->rate, opp->supplies[0].u_volt,
+ opp->available, new_opp->rate,
+ new_opp->supplies[0].u_volt, new_opp->available);

+ /* Should we compare voltages for all regulators here ? */
return opp->available &&
- new_opp->supply.u_volt == opp->supply.u_volt ? 0 : -EEXIST;
+ new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? 0 : -EEXIST;
}

new_opp->opp_table = opp_table;
@@ -1056,9 +1107,9 @@ int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
/* populate the opp table */
new_opp->rate = freq;
tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
- new_opp->supply.u_volt = u_volt;
- new_opp->supply.u_volt_min = u_volt - tol;
- new_opp->supply.u_volt_max = u_volt + tol;
+ new_opp->supplies[0].u_volt = u_volt;
+ new_opp->supplies[0].u_volt_min = u_volt - tol;
+ new_opp->supplies[0].u_volt_max = u_volt + tol;
new_opp->available = true;
new_opp->dynamic = dynamic;

@@ -1303,12 +1354,14 @@ void dev_pm_opp_put_prop_name(struct device *dev)
EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);

/**
- * dev_pm_opp_set_regulator() - Set regulator name for the device
+ * dev_pm_opp_set_regulators() - Set regulator names for the device
* @dev: Device for which regulator name is being set.
- * @name: Name of the regulator.
+ * @names: Array of pointers to the names of the regulator.
+ * @count: Number of regulators.
*
* In order to support OPP switching, OPP layer needs to know the name of the
- * device's regulator, as the core would be required to switch voltages as well.
+ * device's regulators, as the core would be required to switch voltages as
+ * well.
*
* This must be called before any OPPs are initialized for the device.
*
@@ -1318,11 +1371,12 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
* that this function is *NOT* called under RCU protection or in contexts where
* mutex cannot be locked.
*/
-int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+int dev_pm_opp_set_regulators(struct device *dev, const char *names[],
+ unsigned int count)
{
struct opp_table *opp_table;
struct regulator *reg;
- int ret;
+ int ret, i;

mutex_lock(&opp_table_lock);

@@ -1338,26 +1392,43 @@ int dev_pm_opp_set_regulator(struct device *dev, const char *name)
goto err;
}

- /* Already have a regulator set */
- if (WARN_ON(!IS_ERR(opp_table->regulator))) {
+ /* Already have regulators set */
+ if (WARN_ON(opp_table->regulators)) {
ret = -EBUSY;
goto err;
}
- /* Allocate the regulator */
- reg = regulator_get_optional(dev, name);
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "%s: no regulator (%s) found: %d\n",
- __func__, name, ret);
+
+ opp_table->regulators = kmalloc_array(count,
+ sizeof(*opp_table->regulators),
+ GFP_KERNEL);
+ if (!opp_table->regulators)
goto err;
+
+ for (i = 0; i < count; i++) {
+ reg = regulator_get_optional(dev, names[i]);
+ pr_info("%s: %d: %p: %s\n", __func__, __LINE__, reg, names[i]);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "%s: regulator (%s) not found: %d\n",
+ __func__, names[i], ret);
+ goto free_regulators;
+ }
+
+ opp_table->regulators[i] = reg;
}

- opp_table->regulator = reg;
+ opp_table->regulator_count = count;

mutex_unlock(&opp_table_lock);
return 0;

+free_regulators:
+ while (i != 0)
+ regulator_put(opp_table->regulators[--i]);
+
+ kfree(opp_table->regulators);
+ opp_table->regulators = NULL;
err:
_remove_opp_table(opp_table);
unlock:
@@ -1365,11 +1436,11 @@ int dev_pm_opp_set_regulator(struct device *dev, const char *name)

return ret;
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulators);

/**
- * dev_pm_opp_put_regulator() - Releases resources blocked for regulator
- * @dev: Device for which regulator was set.
+ * dev_pm_opp_put_regulators() - Releases resources blocked for regulators
+ * @dev: Device for which regulators were set.
*
* Locking: The internal opp_table and opp structures are RCU protected.
* Hence this function internally uses RCU updater strategy with mutex locks
@@ -1377,9 +1448,10 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulator);
* that this function is *NOT* called under RCU protection or in contexts where
* mutex cannot be locked.
*/
-void dev_pm_opp_put_regulator(struct device *dev)
+void dev_pm_opp_put_regulators(struct device *dev)
{
struct opp_table *opp_table;
+ int i;

mutex_lock(&opp_table_lock);

@@ -1391,16 +1463,20 @@ void dev_pm_opp_put_regulator(struct device *dev)
goto unlock;
}

- if (IS_ERR(opp_table->regulator)) {
- dev_err(dev, "%s: Doesn't have regulator set\n", __func__);
+ if (!opp_table->regulators) {
+ dev_err(dev, "%s: Doesn't have regulators set\n", __func__);
goto unlock;
}

/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));

- regulator_put(opp_table->regulator);
- opp_table->regulator = ERR_PTR(-ENXIO);
+ for (i = opp_table->regulator_count - 1; i >= 0; i--)
+ regulator_put(opp_table->regulators[i]);
+
+ kfree(opp_table->regulators);
+ opp_table->regulators = NULL;
+ opp_table->regulator_count = 0;

/* Try freeing opp_table if this was the last blocking resource */
_remove_opp_table(opp_table);
@@ -1408,7 +1484,7 @@ void dev_pm_opp_put_regulator(struct device *dev)
unlock:
mutex_unlock(&opp_table_lock);
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);

/**
* dev_pm_opp_add() - Add an OPP table from a table definitions
diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c
index c897676ca35f..cb5e5fde3d39 100644
--- a/drivers/base/power/opp/debugfs.c
+++ b/drivers/base/power/opp/debugfs.c
@@ -34,6 +34,43 @@ void opp_debug_remove_one(struct dev_pm_opp *opp)
debugfs_remove_recursive(opp->dentry);
}

+static bool opp_debug_create_supplies(struct dev_pm_opp *opp,
+ struct opp_table *opp_table,
+ struct dentry *pdentry)
+{
+ struct dentry *d;
+ int i = 0;
+ char name[] = "supply-X"; /* support only 0-9 supplies */
+
+ /* Always create at least supply-0 directory */
+ do {
+ name[7] = i + '0';
+
+ /* Create per-opp directory */
+ d = debugfs_create_dir(name, pdentry);
+ if (!d)
+ return false;
+
+ if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d,
+ &opp->supplies[i].u_volt))
+ return false;
+
+ if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d,
+ &opp->supplies[i].u_volt_min))
+ return false;
+
+ if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d,
+ &opp->supplies[i].u_volt_max))
+ return false;
+
+ if (!debugfs_create_ulong("u_amp", S_IRUGO, d,
+ &opp->supplies[i].u_amp))
+ return false;
+ } while (++i < opp_table->regulator_count);
+
+ return true;
+}
+
int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
{
struct dentry *pdentry = opp_table->dentry;
@@ -63,16 +100,7 @@ int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
if (!debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate))
return -ENOMEM;

- if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d, &opp->supply.u_volt))
- return -ENOMEM;
-
- if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d, &opp->supply.u_volt_min))
- return -ENOMEM;
-
- if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d, &opp->supply.u_volt_max))
- return -ENOMEM;
-
- if (!debugfs_create_ulong("u_amp", S_IRUGO, d, &opp->supply.u_amp))
+ if (!opp_debug_create_supplies(opp, opp_table, d))
return -ENOMEM;

if (!debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
diff --git a/drivers/base/power/opp/of.c b/drivers/base/power/opp/of.c
index b7fcd0a1b58b..c857fb07a5bc 100644
--- a/drivers/base/power/opp/of.c
+++ b/drivers/base/power/opp/of.c
@@ -17,6 +17,7 @@
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <linux/export.h>

#include "opp.h"
@@ -105,12 +106,13 @@ static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
struct opp_table *opp_table)
{
- u32 microvolt[3] = {0};
- u32 val;
- int count, ret;
+ u32 *microvolt, *microamp = NULL;
+ int supplies, vcount, icount, ret, i, j;
struct property *prop = NULL;
char name[NAME_MAX];

+ supplies = opp_table->regulator_count ? opp_table->regulator_count : 1;
+
/* Search for "opp-microvolt-<name>" */
if (opp_table->prop_name) {
snprintf(name, sizeof(name), "opp-microvolt-%s",
@@ -128,34 +130,29 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
return 0;
}

- count = of_property_count_u32_elems(opp->np, name);
- if (count < 0) {
+ vcount = of_property_count_u32_elems(opp->np, name);
+ if (vcount < 0) {
dev_err(dev, "%s: Invalid %s property (%d)\n",
- __func__, name, count);
- return count;
+ __func__, name, vcount);
+ return vcount;
}

- /* There can be one or three elements here */
- if (count != 1 && count != 3) {
- dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
- __func__, name, count);
+ /* There can be one or three elements per supply */
+ if (vcount != supplies && vcount != supplies * 3) {
+ dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+ __func__, name, vcount, supplies);
return -EINVAL;
}

- ret = of_property_read_u32_array(opp->np, name, microvolt, count);
+ microvolt = kmalloc_array(vcount, sizeof(*microvolt), GFP_KERNEL);
+ if (!microvolt)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(opp->np, name, microvolt, vcount);
if (ret) {
dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
- return -EINVAL;
- }
-
- opp->supply.u_volt = microvolt[0];
-
- if (count == 1) {
- opp->supply.u_volt_min = opp->supply.u_volt;
- opp->supply.u_volt_max = opp->supply.u_volt;
- } else {
- opp->supply.u_volt_min = microvolt[1];
- opp->supply.u_volt_max = microvolt[2];
+ ret = -EINVAL;
+ goto free_microvolt;
}

/* Search for "opp-microamp-<name>" */
@@ -172,10 +169,59 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
prop = of_find_property(opp->np, name, NULL);
}

- if (prop && !of_property_read_u32(opp->np, name, &val))
- opp->supply.u_amp = val;
+ if (prop) {
+ icount = of_property_count_u32_elems(opp->np, name);
+ if (icount < 0) {
+ dev_err(dev, "%s: Invalid %s property (%d)\n", __func__,
+ name, icount);
+ ret = icount;
+ goto free_microvolt;
+ }

- return 0;
+ if (icount != supplies) {
+ dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+ __func__, name, icount, supplies);
+ ret = -EINVAL;
+ goto free_microvolt;
+ }
+
+ microamp = kmalloc_array(icount, sizeof(*microamp), GFP_KERNEL);
+ if (!microamp) {
+ ret = -EINVAL;
+ goto free_microvolt;
+ }
+
+ ret = of_property_read_u32_array(opp->np, name, microamp,
+ icount);
+ if (ret) {
+ dev_err(dev, "%s: error parsing %s: %d\n", __func__,
+ name, ret);
+ ret = -EINVAL;
+ goto free_microamp;
+ }
+ }
+
+ for (i = 0, j = 0; i < supplies; i++) {
+ opp->supplies[i].u_volt = microvolt[j++];
+
+ if (vcount == supplies) {
+ opp->supplies[i].u_volt_min = opp->supplies[i].u_volt;
+ opp->supplies[i].u_volt_max = opp->supplies[i].u_volt;
+ } else {
+ opp->supplies[i].u_volt_min = microvolt[j++];
+ opp->supplies[i].u_volt_max = microvolt[j++];
+ }
+
+ if (microamp)
+ opp->supplies[i].u_amp = microamp[i];
+ }
+
+free_microamp:
+ kfree(microamp);
+free_microvolt:
+ kfree(microvolt);
+
+ return ret;
}

/**
@@ -304,8 +350,8 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)

pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
__func__, new_opp->turbo, new_opp->rate,
- new_opp->supply.u_volt, new_opp->supply.u_volt_min,
- new_opp->supply.u_volt_max, new_opp->clock_latency_ns);
+ new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min,
+ new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns);

/*
* Notify the changes in the availability of the operable
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 1bda0d35c486..d3f0861f9bff 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -77,7 +77,7 @@ struct dev_pm_opp_supply {
* @turbo: true if turbo (boost) OPP
* @suspend: true if suspend OPP
* @rate: Frequency in hertz
- * @supply: Power supply voltage/current values
+ * @supplies: Power supplies voltage/current values
* @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
* frequency from any other OPP's frequency.
* @opp_table: points back to the opp_table struct this opp belongs to
@@ -96,7 +96,7 @@ struct dev_pm_opp {
bool suspend;
unsigned long rate;

- struct dev_pm_opp_supply supply;
+ struct dev_pm_opp_supply *supplies;

unsigned long clock_latency_ns;

@@ -155,7 +155,8 @@ enum opp_table_access {
* @supported_hw_count: Number of elements in supported_hw array.
* @prop_name: A name to postfix to many DT properties, while parsing them.
* @clk: Device's clock handle
- * @regulator: Supply regulator
+ * @regulators: Supply regulators
+ * @regulator_count: Number of Power Supply regulators
* @dentry: debugfs dentry pointer of the real device directory (not links).
* @dentry_name: Name of the real dentry.
*
@@ -190,7 +191,8 @@ struct opp_table {
unsigned int supported_hw_count;
const char *prop_name;
struct clk *clk;
- struct regulator *regulator;
+ struct regulator **regulators;
+ unsigned int regulator_count;

#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 5c07ae05d69a..15cb26118dc7 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -186,7 +186,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
*/
name = find_supply_name(cpu_dev);
if (name) {
- ret = dev_pm_opp_set_regulator(cpu_dev, name);
+ const char *names[] = {name};
+
+ ret = dev_pm_opp_set_regulators(cpu_dev, names,
+ ARRAY_SIZE(names));
if (ret) {
dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
policy->cpu, ret);
@@ -285,7 +288,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
out_free_opp:
dev_pm_opp_of_cpumask_remove_table(policy->cpus);
if (name)
- dev_pm_opp_put_regulator(cpu_dev);
+ dev_pm_opp_put_regulators(cpu_dev);
out_put_clk:
clk_put(cpu_clk);

@@ -300,7 +303,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
if (priv->reg_name)
- dev_pm_opp_put_regulator(priv->cpu_dev);
+ dev_pm_opp_put_regulators(priv->cpu_dev);

clk_put(policy->clk);
kfree(priv);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index bca26157f5b6..0606b70a8b97 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -62,8 +62,8 @@ int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
void dev_pm_opp_put_supported_hw(struct device *dev);
int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
void dev_pm_opp_put_prop_name(struct device *dev);
-int dev_pm_opp_set_regulator(struct device *dev, const char *name);
-void dev_pm_opp_put_regulator(struct device *dev);
+int dev_pm_opp_set_regulators(struct device *dev, const char *names[], unsigned int count);
+void dev_pm_opp_put_regulators(struct device *dev);
int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask);
int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
@@ -170,12 +170,12 @@ static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)

static inline void dev_pm_opp_put_prop_name(struct device *dev) {}

-static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
+static inline int dev_pm_opp_set_regulators(struct device *dev, const char *names[], unsigned int count)
{
return -ENOTSUPP;
}

-static inline void dev_pm_opp_put_regulator(struct device *dev) {}
+static inline void dev_pm_opp_put_regulators(struct device *dev) {}

static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
{
--
2.7.1.410.g6faf27b
\
 
 \ /
  Last update: 2016-10-20 10:48    [W:0.200 / U:12.684 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site