lkml.org 
[lkml]   [2016]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] ARM: dts: pxa: add pxa25x cpu operating points
On 18-10-16, 17:30, Robert Jarzmik wrote:
> Viresh Kumar <viresh.kumar@linaro.org> writes:
>
> > On 15-10-16, 21:57, Robert Jarzmik wrote:
> >> Add the relevant data taken from the PXA 25x Electrical, Mechanical, and
> >> Thermal Specfication. This will be input data for cpufreq-dt driver.
> >>
> >> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> >> ---
> >> arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++
> >> 1 file changed, 25 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
> >> index 0d1e012178c4..16b4e8bad4a5 100644
> >> --- a/arch/arm/boot/dts/pxa25x.dtsi
> >> +++ b/arch/arm/boot/dts/pxa25x.dtsi
> >> @@ -89,4 +89,29 @@
> >> clocks = <&clktimer>;
> >> status = "okay";
> >> };
> >> +
> >> + pxa250_opp_table: opp_table0 {
> >> + compatible = "operating-points-v2";
> >> +
> >> + opp@99500 {
> >
> > We have been keeping the values in ^^^ same as the values present
> > below. Any specific reason for making it different here ?
> No, that's a good comment, I'll change that.
>
> I wrote this incrementaly, first the node, then the opp-hz. Then I realized that
> the source crystal, at 3.8684 MHz didn't provide a round 99.5 MHz core clock,
> but a 99.5328 MHz clock.
>
> Anyway, I'll change that ... let's say into opp@99533 in this case ?

Just write the whole value 99532800.

--
viresh

\
 
 \ /
  Last update: 2016-10-19 18:09    [W:0.060 / U:10.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site