lkml.org 
[lkml]   [2016]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v10 01/11] remoteproc: st_slim_rproc: add a slimcore rproc driver
    Date
    slim core is used as a basis for many IPs in the STi
    chipsets such as fdma and demux. To avoid duplicating
    the elf loading code in each device driver a slim
    rproc driver has been created.

    This driver is designed to be used by other device drivers
    such as fdma, or demux whose IP is based around a slim core.
    The device driver can call slim_rproc_alloc() to allocate
    a slim rproc and slim_rproc_put() when finished.

    This driver takes care of ioremapping the slim
    registers (dmem, imem, slimcore, peripherals), whose offsets
    and sizes can change between IP's. It also obtains and enables
    any clocks used by the device. This approach avoids having
    a double mapping of the registers as slim_rproc does not register
    its own platform device. It also maps well to device tree
    abstraction as it allows us to have one dt node for the whole
    device.

    All of the generic rproc elf loading code can be reused, and
    we provide start() stop() hooks to start and stop the slim
    core once the firmware has been loaded. This has been tested
    successfully with fdma driver.

    Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
    ---
    drivers/remoteproc/Kconfig | 7 +-
    drivers/remoteproc/Makefile | 1 +
    drivers/remoteproc/st_slim_rproc.c | 364 +++++++++++++++++++++++++++++++
    include/linux/remoteproc/st_slim_rproc.h | 58 +++++
    4 files changed, 428 insertions(+), 2 deletions(-)
    create mode 100644 drivers/remoteproc/st_slim_rproc.c
    create mode 100644 include/linux/remoteproc/st_slim_rproc.h

    diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
    index f396bfe..9270c8e 100644
    --- a/drivers/remoteproc/Kconfig
    +++ b/drivers/remoteproc/Kconfig
    @@ -58,7 +58,6 @@ config DA8XX_REMOTEPROC
    tristate "DA8xx/OMAP-L13x remoteproc support"
    depends on ARCH_DAVINCI_DA8XX
    select CMA if MMU
    - select REMOTEPROC
    select RPMSG_VIRTIO
    help
    Say y here to support DA8xx/OMAP-L13x remote processors via the
    @@ -99,10 +98,10 @@ config QCOM_WCNSS_PIL
    tristate "Qualcomm WCNSS Peripheral Image Loader"
    depends on OF && ARCH_QCOM
    depends on QCOM_SMEM
    + depends on REMOTEPROC
    select QCOM_MDT_LOADER
    select QCOM_SCM
    select QCOM_WCNSS_IRIS
    - select REMOTEPROC
    help
    Say y here to support the Peripheral Image Loader for the Qualcomm
    Wireless Connectivity Subsystem.
    @@ -116,4 +115,8 @@ config ST_REMOTEPROC
    processor framework.
    This can be either built-in or a loadable module.

    +config ST_SLIM_REMOTEPROC
    + tristate
    + select REMOTEPROC
    +
    endmenu
    diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
    index 6dfb62e..924f0cb 100644
    --- a/drivers/remoteproc/Makefile
    +++ b/drivers/remoteproc/Makefile
    @@ -16,3 +16,4 @@ obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
    obj-$(CONFIG_QCOM_WCNSS_IRIS) += qcom_wcnss_iris.o
    obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss.o
    obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
    +obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
    diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
    new file mode 100644
    index 0000000..1484e97
    --- /dev/null
    +++ b/drivers/remoteproc/st_slim_rproc.c
    @@ -0,0 +1,364 @@
    +/*
    + * SLIM core rproc driver
    + *
    + * Copyright (C) 2016 STMicroelectronics
    + *
    + * Author: Peter Griffin <peter.griffin@linaro.org>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License as published by
    + * the Free Software Foundation; either version 2 of the License, or
    + * (at your option) any later version.
    + */
    +
    +#include <linux/clk.h>
    +#include <linux/err.h>
    +#include <linux/kernel.h>
    +#include <linux/module.h>
    +#include <linux/of.h>
    +#include <linux/of_device.h>
    +#include <linux/platform_device.h>
    +#include <linux/remoteproc.h>
    +#include <linux/remoteproc/st_slim_rproc.h>
    +#include "remoteproc_internal.h"
    +
    +/* SLIM core registers */
    +#define SLIM_ID_OFST 0x0
    +#define SLIM_VER_OFST 0x4
    +
    +#define SLIM_EN_OFST 0x8
    +#define SLIM_EN_RUN BIT(0)
    +
    +#define SLIM_CLK_GATE_OFST 0xC
    +#define SLIM_CLK_GATE_DIS BIT(0)
    +#define SLIM_CLK_GATE_RESET BIT(2)
    +
    +#define SLIM_SLIM_PC_OFST 0x20
    +
    +/* DMEM registers */
    +#define SLIM_REV_ID_OFST 0x0
    +#define SLIM_REV_ID_MIN_MASK GENMASK(15, 8)
    +#define SLIM_REV_ID_MIN(id) ((id & SLIM_REV_ID_MIN_MASK) >> 8)
    +#define SLIM_REV_ID_MAJ_MASK GENMASK(23, 16)
    +#define SLIM_REV_ID_MAJ(id) ((id & SLIM_REV_ID_MAJ_MASK) >> 16)
    +
    +
    +/* peripherals registers */
    +#define SLIM_STBUS_SYNC_OFST 0xF88
    +#define SLIM_STBUS_SYNC_DIS BIT(0)
    +
    +#define SLIM_INT_SET_OFST 0xFD4
    +#define SLIM_INT_CLR_OFST 0xFD8
    +#define SLIM_INT_MASK_OFST 0xFDC
    +
    +#define SLIM_CMD_CLR_OFST 0xFC8
    +#define SLIM_CMD_MASK_OFST 0xFCC
    +
    +static const char *mem_names[ST_SLIM_MEM_MAX] = {
    + [ST_SLIM_DMEM] = "dmem",
    + [ST_SLIM_IMEM] = "imem",
    +};
    +
    +static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev)
    +{
    + int clk, err;
    +
    + for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) {
    + slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk);
    + if (IS_ERR(slim_rproc->clks[clk])) {
    + err = PTR_ERR(slim_rproc->clks[clk]);
    + if (err == -EPROBE_DEFER)
    + goto err_put_clks;
    + slim_rproc->clks[clk] = NULL;
    + break;
    + }
    + }
    +
    + return 0;
    +
    +err_put_clks:
    + while (--clk >= 0)
    + clk_put(slim_rproc->clks[clk]);
    +
    + return err;
    +}
    +
    +static void slim_clk_disable(struct st_slim_rproc *slim_rproc)
    +{
    + int clk;
    +
    + for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
    + clk_disable_unprepare(slim_rproc->clks[clk]);
    +}
    +
    +static int slim_clk_enable(struct st_slim_rproc *slim_rproc)
    +{
    + int clk, ret;
    +
    + for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) {
    + ret = clk_prepare_enable(slim_rproc->clks[clk]);
    + if (ret)
    + goto err_disable_clks;
    + }
    +
    + return 0;
    +
    +err_disable_clks:
    + while (--clk >= 0)
    + clk_disable_unprepare(slim_rproc->clks[clk]);
    +
    + return ret;
    +}
    +
    +/*
    + * Remoteproc slim specific device handlers
    + */
    +static int slim_rproc_start(struct rproc *rproc)
    +{
    + struct device *dev = &rproc->dev;
    + struct st_slim_rproc *slim_rproc = rproc->priv;
    + unsigned long hw_id, hw_ver, fw_rev;
    + u32 val;
    +
    + /* disable CPU pipeline clock & reset CPU pipeline */
    + val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET;
    + writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
    +
    + /* disable SLIM core STBus sync */
    + writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST);
    +
    + /* enable cpu pipeline clock */
    + writel(!SLIM_CLK_GATE_DIS,
    + slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
    +
    + /* clear int & cmd mailbox */
    + writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST);
    + writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST);
    +
    + /* enable all channels cmd & int */
    + writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST);
    + writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST);
    +
    + /* enable cpu */
    + writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
    +
    + hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST);
    + hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST);
    +
    + fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr +
    + SLIM_REV_ID_OFST);
    +
    + dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n",
    + SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev),
    + hw_id, hw_ver);
    +
    + return 0;
    +}
    +
    +static int slim_rproc_stop(struct rproc *rproc)
    +{
    + struct st_slim_rproc *slim_rproc = rproc->priv;
    + u32 val;
    +
    + /* mask all (cmd & int) channels */
    + writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST);
    + writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST);
    +
    + /* disable cpu pipeline clock */
    + writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
    +
    + writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
    +
    + val = readl(slim_rproc->slimcore + SLIM_EN_OFST);
    + if (val & SLIM_EN_RUN)
    + dev_warn(&rproc->dev, "Failed to disable SLIM");
    +
    + dev_dbg(&rproc->dev, "slim stopped\n");
    +
    + return 0;
    +}
    +
    +static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
    +{
    + struct st_slim_rproc *slim_rproc = rproc->priv;
    + void *va = NULL;
    + int i;
    +
    + for (i = 0; i < ST_SLIM_MEM_MAX; i++) {
    + if (da != slim_rproc->mem[i].bus_addr)
    + continue;
    +
    + if (len <= slim_rproc->mem[i].size) {
    + /* __force to make sparse happy with type conversion */
    + va = (__force void *)slim_rproc->mem[i].cpu_addr;
    + break;
    + }
    + }
    +
    + dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%p\n", da, len, va);
    +
    + return va;
    +}
    +
    +static struct rproc_ops slim_rproc_ops = {
    + .start = slim_rproc_start,
    + .stop = slim_rproc_stop,
    + .da_to_va = slim_rproc_da_to_va,
    +};
    +
    +/*
    + * Firmware handler operations: sanity, boot address, load ...
    + */
    +
    +static struct resource_table empty_rsc_tbl = {
    + .ver = 1,
    + .num = 0,
    +};
    +
    +static struct resource_table *slim_rproc_find_rsc_table(struct rproc *rproc,
    + const struct firmware *fw,
    + int *tablesz)
    +{
    + *tablesz = sizeof(empty_rsc_tbl);
    + return &empty_rsc_tbl;
    +}
    +
    +static struct rproc_fw_ops slim_rproc_fw_ops = {
    + .find_rsc_table = slim_rproc_find_rsc_table,
    +};
    +
    +/**
    + * st_slim_rproc_alloc() - allocate and initialise slim rproc
    + * @pdev: Pointer to the platform_device struct
    + * @fw_name: Name of firmware for rproc to use
    + *
    + * Function for allocating and initialising a slim rproc for use by
    + * device drivers whose IP is based around the SLIM core. It
    + * obtains and enables any clocks required by the SLIM core and also
    + * ioremaps the various IO.
    + *
    + * Returns st_slim_rproc pointer or PTR_ERR() on error.
    + */
    +
    +struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev,
    + char *fw_name)
    +{
    + struct device *dev = &pdev->dev;
    + struct st_slim_rproc *slim_rproc;
    + struct device_node *np = dev->of_node;
    + struct rproc *rproc;
    + struct resource *res;
    + int err, i;
    + const struct rproc_fw_ops *elf_ops;
    +
    + if (!fw_name)
    + return ERR_PTR(-EINVAL);
    +
    + if (!of_device_is_compatible(np, "st,slim-rproc"))
    + return ERR_PTR(-EINVAL);
    +
    + rproc = rproc_alloc(dev, np->name, &slim_rproc_ops,
    + fw_name, sizeof(*slim_rproc));
    + if (!rproc)
    + return ERR_PTR(-ENOMEM);
    +
    + rproc->has_iommu = false;
    +
    + slim_rproc = rproc->priv;
    + slim_rproc->rproc = rproc;
    +
    + elf_ops = rproc->fw_ops;
    + /* Use some generic elf ops */
    + slim_rproc_fw_ops.load = elf_ops->load;
    + slim_rproc_fw_ops.sanity_check = elf_ops->sanity_check;
    +
    + rproc->fw_ops = &slim_rproc_fw_ops;
    +
    + /* get imem and dmem */
    + for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
    + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
    + mem_names[i]);
    +
    + slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
    + if (IS_ERR(slim_rproc->mem[i].cpu_addr)) {
    + dev_err(&pdev->dev, "devm_ioremap_resource failed\n");
    + err = PTR_ERR(slim_rproc->mem[i].cpu_addr);
    + goto err;
    + }
    + slim_rproc->mem[i].bus_addr = res->start;
    + slim_rproc->mem[i].size = resource_size(res);
    + }
    +
    + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore");
    + slim_rproc->slimcore = devm_ioremap_resource(dev, res);
    + if (IS_ERR(slim_rproc->slimcore)) {
    + dev_err(&pdev->dev, "failed to ioremap slimcore IO\n");
    + err = PTR_ERR(slim_rproc->slimcore);
    + goto err;
    + }
    +
    + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals");
    + slim_rproc->peri = devm_ioremap_resource(dev, res);
    + if (IS_ERR(slim_rproc->peri)) {
    + dev_err(&pdev->dev, "failed to ioremap peripherals IO\n");
    + err = PTR_ERR(slim_rproc->peri);
    + goto err;
    + }
    +
    + err = slim_clk_get(slim_rproc, dev);
    + if (err)
    + goto err;
    +
    + err = slim_clk_enable(slim_rproc);
    + if (err) {
    + dev_err(dev, "Failed to enable clocks\n");
    + goto err_clk_put;
    + }
    +
    + /* Register as a remoteproc device */
    + err = rproc_add(rproc);
    + if (err) {
    + dev_err(dev, "registration of slim remoteproc failed\n");
    + goto err_clk_dis;
    + }
    +
    + return slim_rproc;
    +
    +err_clk_dis:
    + slim_clk_disable(slim_rproc);
    +err_clk_put:
    + for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++)
    + clk_put(slim_rproc->clks[i]);
    +err:
    + rproc_put(rproc);
    + return ERR_PTR(err);
    +}
    +EXPORT_SYMBOL(st_slim_rproc_alloc);
    +
    +/**
    + * st_slim_rproc_put() - put slim rproc resources
    + * @slim_rproc: Pointer to the st_slim_rproc struct
    + *
    + * Function for calling respective _put() functions on slim_rproc resources.
    + *
    + */
    +void st_slim_rproc_put(struct st_slim_rproc *slim_rproc)
    +{
    + int clk;
    +
    + if (!slim_rproc)
    + return;
    +
    + slim_clk_disable(slim_rproc);
    +
    + for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
    + clk_put(slim_rproc->clks[clk]);
    +
    + rproc_del(slim_rproc->rproc);
    + rproc_put(slim_rproc->rproc);
    +}
    +EXPORT_SYMBOL(st_slim_rproc_put);
    +
    +MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
    +MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver");
    +MODULE_LICENSE("GPL v2");
    diff --git a/include/linux/remoteproc/st_slim_rproc.h b/include/linux/remoteproc/st_slim_rproc.h
    new file mode 100644
    index 0000000..4155556
    --- /dev/null
    +++ b/include/linux/remoteproc/st_slim_rproc.h
    @@ -0,0 +1,58 @@
    +/*
    + * SLIM core rproc driver header
    + *
    + * Copyright (C) 2016 STMicroelectronics
    + *
    + * Author: Peter Griffin <peter.griffin@linaro.org>
    + *
    + * This program is free software; you can redistribute it and/or modify
    + * it under the terms of the GNU General Public License as published by
    + * the Free Software Foundation; either version 2 of the License, or
    + * (at your option) any later version.
    + */
    +#ifndef _ST_REMOTEPROC_SLIM_H
    +#define _ST_REMOTEPROC_SLIM_H
    +
    +#define ST_SLIM_MEM_MAX 2
    +#define ST_SLIM_MAX_CLK 4
    +
    +enum {
    + ST_SLIM_DMEM,
    + ST_SLIM_IMEM,
    +};
    +
    +/**
    + * struct st_slim_mem - slim internal memory structure
    + * @cpu_addr: MPU virtual address of the memory region
    + * @bus_addr: Bus address used to access the memory region
    + * @size: Size of the memory region
    + */
    +struct st_slim_mem {
    + void __iomem *cpu_addr;
    + phys_addr_t bus_addr;
    + size_t size;
    +};
    +
    +/**
    + * struct st_slim_rproc - SLIM slim core
    + * @rproc: rproc handle
    + * @mem: slim memory information
    + * @slimcore: slim slimcore regs
    + * @peri: slim peripheral regs
    + * @clks: slim clocks
    + */
    +struct st_slim_rproc {
    + struct rproc *rproc;
    + struct st_slim_mem mem[ST_SLIM_MEM_MAX];
    + void __iomem *slimcore;
    + void __iomem *peri;
    +
    + /* st_slim_rproc private */
    + struct clk *clks[ST_SLIM_MAX_CLK];
    +};
    +
    +struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev,
    + char *fw_name);
    +void st_slim_rproc_put(struct st_slim_rproc *slim_rproc);
    +
    +#endif
    --
    1.9.1
    \
     
     \ /
      Last update: 2016-10-18 11:40    [W:5.480 / U:0.140 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site