lkml.org 
[lkml]   [2016]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 04/15] ethernet/marvell: use core min/max MTU checking
Date
mvneta: min_mtu 68, max_mtu 9676
- mtu validation routine mostly did range check, merge back into
mvneta_change_mtu for simplicity

mvpp2: min_mtu 68, max_mtu 9676
- mtu validation routine mostly did range check, merge back into
mvpp2_change_mtu for simplicity

pxa168_eth: min_mtu 68, max_mtu 9500

skge: min_mtu 60, max_mtu 9000

sky2: min_mtu 68, max_mtu 1500 or 9000, depending on hw

CC: netdev@vger.kernel.org
CC: Mirko Lindner <mlindner@marvell.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
drivers/net/ethernet/marvell/mvneta.c | 36 +++++++++----------------------
drivers/net/ethernet/marvell/mvpp2.c | 36 ++++++++-----------------------
drivers/net/ethernet/marvell/pxa168_eth.c | 7 +++---
drivers/net/ethernet/marvell/skge.c | 7 +++---
drivers/net/ethernet/marvell/sky2.c | 18 +++++++---------
5 files changed, 35 insertions(+), 69 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5cb07c2..b85819e 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3024,29 +3024,6 @@ static void mvneta_stop_dev(struct mvneta_port *pp)
mvneta_rx_reset(pp);
}

-/* Return positive if MTU is valid */
-static int mvneta_check_mtu_valid(struct net_device *dev, int mtu)
-{
- if (mtu < 68) {
- netdev_err(dev, "cannot change mtu to less than 68\n");
- return -EINVAL;
- }
-
- /* 9676 == 9700 - 20 and rounding to 8 */
- if (mtu > 9676) {
- netdev_info(dev, "Illegal MTU value %d, round to 9676\n", mtu);
- mtu = 9676;
- }
-
- if (!IS_ALIGNED(MVNETA_RX_PKT_SIZE(mtu), 8)) {
- netdev_info(dev, "Illegal MTU value %d, rounding to %d\n",
- mtu, ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8));
- mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
- }
-
- return mtu;
-}
-
static void mvneta_percpu_enable(void *arg)
{
struct mvneta_port *pp = arg;
@@ -3067,9 +3044,11 @@ static int mvneta_change_mtu(struct net_device *dev, int mtu)
struct mvneta_port *pp = netdev_priv(dev);
int ret;

- mtu = mvneta_check_mtu_valid(dev, mtu);
- if (mtu < 0)
- return -EINVAL;
+ if (!IS_ALIGNED(MVNETA_RX_PKT_SIZE(mtu), 8)) {
+ netdev_info(dev, "Illegal MTU value %d, rounding to %d\n",
+ mtu, ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8));
+ mtu = ALIGN(MVNETA_RX_PKT_SIZE(mtu), 8);
+ }

dev->mtu = mtu;

@@ -4154,6 +4133,11 @@ static int mvneta_probe(struct platform_device *pdev)
dev->priv_flags |= IFF_UNICAST_FLT | IFF_LIVE_ADDR_CHANGE;
dev->gso_max_segs = MVNETA_MAX_TSO_SEGS;

+ /* MTU range: 68 - 9676 */
+ dev->min_mtu = ETH_MIN_MTU;
+ /* 9676 == 9700 - 20 and rounding to 8 */
+ dev->max_mtu = 9676;
+
err = register_netdev(dev);
if (err < 0) {
dev_err(&pdev->dev, "failed to register\n");
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 60227a3..c8bf155 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -5453,29 +5453,6 @@ static void mvpp2_stop_dev(struct mvpp2_port *port)
phy_stop(ndev->phydev);
}

-/* Return positive if MTU is valid */
-static inline int mvpp2_check_mtu_valid(struct net_device *dev, int mtu)
-{
- if (mtu < 68) {
- netdev_err(dev, "cannot change mtu to less than 68\n");
- return -EINVAL;
- }
-
- /* 9676 == 9700 - 20 and rounding to 8 */
- if (mtu > 9676) {
- netdev_info(dev, "illegal MTU value %d, round to 9676\n", mtu);
- mtu = 9676;
- }
-
- if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) {
- netdev_info(dev, "illegal MTU value %d, round to %d\n", mtu,
- ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8));
- mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
- }
-
- return mtu;
-}
-
static int mvpp2_check_ringparam_valid(struct net_device *dev,
struct ethtool_ringparam *ring)
{
@@ -5717,10 +5694,10 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu)
struct mvpp2_port *port = netdev_priv(dev);
int err;

- mtu = mvpp2_check_mtu_valid(dev, mtu);
- if (mtu < 0) {
- err = mtu;
- goto error;
+ if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) {
+ netdev_info(dev, "illegal MTU value %d, round to %d\n", mtu,
+ ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8));
+ mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
}

if (!netif_running(dev)) {
@@ -6212,6 +6189,11 @@ static int mvpp2_port_probe(struct platform_device *pdev,
dev->hw_features |= features | NETIF_F_RXCSUM | NETIF_F_GRO;
dev->vlan_features |= features;

+ /* MTU range: 68 - 9676 */
+ dev->min_mtu = ETH_MIN_MTU;
+ /* 9676 == 9700 - 20 and rounding to 8 */
+ dev->max_mtu = 9676;
+
err = register_netdev(dev);
if (err < 0) {
dev_err(&pdev->dev, "failed to register netdev\n");
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 5d5000c..b78a838 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1209,9 +1209,6 @@ static int pxa168_eth_change_mtu(struct net_device *dev, int mtu)
int retval;
struct pxa168_eth_private *pep = netdev_priv(dev);

- if ((mtu > 9500) || (mtu < 68))
- return -EINVAL;
-
dev->mtu = mtu;
retval = set_port_config_ext(pep);

@@ -1459,6 +1456,10 @@ static int pxa168_eth_probe(struct platform_device *pdev)
dev->base_addr = 0;
dev->ethtool_ops = &pxa168_ethtool_ops;

+ /* MTU range: 68 - 9500 */
+ dev->min_mtu = ETH_MIN_MTU;
+ dev->max_mtu = 9500;
+
INIT_WORK(&pep->tx_timeout_task, pxa168_eth_tx_timeout_task);

if (pdev->dev.of_node)
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 7173836..9c4b722 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -2900,9 +2900,6 @@ static int skge_change_mtu(struct net_device *dev, int new_mtu)
{
int err;

- if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
- return -EINVAL;
-
if (!netif_running(dev)) {
dev->mtu = new_mtu;
return 0;
@@ -3857,6 +3854,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
dev->watchdog_timeo = TX_WATCHDOG;
dev->irq = hw->pdev->irq;

+ /* MTU range: 60 - 9000 */
+ dev->min_mtu = ETH_ZLEN;
+ dev->max_mtu = ETH_JUMBO_MTU;
+
if (highmem)
dev->features |= NETIF_F_HIGHDMA;

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index f05ea56..aa60f4d 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -2398,16 +2398,6 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
u16 ctl, mode;
u32 imask;

- /* MTU size outside the spec */
- if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
- return -EINVAL;
-
- /* MTU > 1500 on yukon FE and FE+ not allowed */
- if (new_mtu > ETH_DATA_LEN &&
- (hw->chip_id == CHIP_ID_YUKON_FE ||
- hw->chip_id == CHIP_ID_YUKON_FE_P))
- return -EINVAL;
-
if (!netif_running(dev)) {
dev->mtu = new_mtu;
netdev_update_features(dev);
@@ -4808,6 +4798,14 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,

dev->features |= dev->hw_features;

+ /* MTU range: 60 - 1500 or 9000 */
+ dev->min_mtu = ETH_ZLEN;
+ if (hw->chip_id == CHIP_ID_YUKON_FE ||
+ hw->chip_id == CHIP_ID_YUKON_FE_P)
+ dev->max_mtu = ETH_DATA_LEN;
+ else
+ dev->max_mtu = ETH_JUMBO_MTU;
+
/* try to get mac address in the following order:
* 1) from device tree data
* 2) from internal registers set by bootloader
--
2.10.0
\
 
 \ /
  Last update: 2016-10-17 21:59    [W:0.144 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site