Messages in this thread Patch in this message | | | From | Mika Westerberg <> | Subject | [PATCH v4 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake SoC | Date | Mon, 17 Oct 2016 17:58:58 +0300 |
| |
Intel Apollo Lake SoC exposes serial SPI flash through the LPC device. The SPI flash host controller is not discoverable through PCI config cycles because P2SB (function 0 of the device 13) is hidden by the BIOS. We unhide the device briefly in order to read BAR 0 of the SPI host controller.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> --- drivers/mfd/lpc_ich.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 985bda575849..1d8d1caebdf1 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -56,6 +56,7 @@ * document number TBD : Wildcat Point-LP * document number TBD : 9 Series * document number TBD : Lewisburg + * document number TBD : Apollo Lake SoC */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -92,6 +93,8 @@ #define BCR 0xdc #define BCR_WPD BIT(0) +#define SPIBASE_APL_SZ 4096 + #define GPIOBASE_ICH0 0x58 #define GPIOCTRL_ICH0 0x5C #define GPIOBASE_ICH6 0x48 @@ -239,6 +242,7 @@ enum lpc_chipsets { LPC_BRASWELL, /* Braswell SoC */ LPC_LEWISBURG, /* Lewisburg */ LPC_9S, /* 9 Series */ + LPC_APL, /* Apollo Lake SoC */ }; static struct lpc_ich_info lpc_chipset_info[] = { @@ -559,6 +563,10 @@ static struct lpc_ich_info lpc_chipset_info[] = { .name = "9 Series", .iTCO_version = 2, }, + [LPC_APL] = { + .name = "Apollo Lake SoC", + .spi_type = INTEL_SPI_BXT, + }, }; /* @@ -707,6 +715,7 @@ static const struct pci_device_id lpc_ich_ids[] = { { PCI_VDEVICE(INTEL, 0x3b14), LPC_3420}, { PCI_VDEVICE(INTEL, 0x3b16), LPC_3450}, { PCI_VDEVICE(INTEL, 0x5031), LPC_EP80579}, + { PCI_VDEVICE(INTEL, 0x5ae8), LPC_APL}, { PCI_VDEVICE(INTEL, 0x8c40), LPC_LPT}, { PCI_VDEVICE(INTEL, 0x8c41), LPC_LPT}, { PCI_VDEVICE(INTEL, 0x8c42), LPC_LPT}, @@ -1126,6 +1135,36 @@ static int lpc_ich_init_spi(struct pci_dev *dev) } break; + case INTEL_SPI_BXT: { + unsigned int p2sb = PCI_DEVFN(13, 0); + unsigned int spi = PCI_DEVFN(13, 2); + struct pci_bus *bus = dev->bus; + + /* + * The P2SB is hidden by BIOS and we need to unhide it in + * order to read BAR of the SPI flash device. Once that is + * done we hide it again. + */ + pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x0); + pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0, + &spi_base); + if (spi_base != ~0) { + res->start = spi_base & 0xfffffff0; + res->end = res->start + SPIBASE_APL_SZ - 1; + + pci_bus_read_config_dword(bus, spi, BCR, &bcr); + if (!(bcr & BCR_WPD)) { + bcr |= BCR_WPD; + pci_bus_write_config_dword(bus, spi, BCR, bcr); + pci_bus_read_config_dword(bus, spi, BCR, &bcr); + } + info->writeable = !!(bcr & BCR_WPD); + } + + pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1); + break; + } + default: return -EINVAL; } -- 2.9.3
| |