lkml.org 
[lkml]   [2016]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Patch 05/35] media: ti-vpe: Use line average de-interlacing for first 2 frames
From
Date
On 09/28/2016 11:20 PM, Benoit Parrot wrote:
> From: Archit Taneja <archit@ti.com>
>
> For n input fields, the VPE de-interlacer creates n - 2 progressive frames.

That's confusing. I think you mean '(n / 2) - 1'? Two fields make one frame, right?

Regards,

Hans

>
> To support this, we use line average mode of de-interlacer for the first 2
> input fields to generate 2 progressive frames. We then revert back to the
> preferred EDI method, and create n - 2 frames, creating a sum of n frames.
>
> Signed-off-by: Archit Taneja <archit@ti.com>
> Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
> drivers/media/platform/ti-vpe/vpe.c | 33 +++++++++++++++++++++++++++++++--
> 1 file changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> index 3921fd8cdf1d..a0b29685fb69 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -141,7 +141,7 @@ struct vpe_dei_regs {
> */
> static const struct vpe_dei_regs dei_regs = {
> .mdt_spacial_freq_thr_reg = 0x020C0804u,
> - .edi_config_reg = 0x0118100Fu,
> + .edi_config_reg = 0x0118100Cu,
> .edi_lut_reg0 = 0x08040200u,
> .edi_lut_reg1 = 0x1010100Cu,
> .edi_lut_reg2 = 0x10101010u,
> @@ -798,6 +798,23 @@ static void set_dei_shadow_registers(struct vpe_ctx *ctx)
> ctx->load_mmrs = true;
> }
>
> +static void config_edi_input_mode(struct vpe_ctx *ctx, int mode)
> +{
> + struct vpe_mmr_adb *mmr_adb = ctx->mmr_adb.addr;
> + u32 *edi_config_reg = &mmr_adb->dei_regs[3];
> +
> + if (mode & 0x2)
> + write_field(edi_config_reg, 1, 1, 2); /* EDI_ENABLE_3D */
> +
> + if (mode & 0x3)
> + write_field(edi_config_reg, 1, 1, 3); /* EDI_CHROMA_3D */
> +
> + write_field(edi_config_reg, mode, VPE_EDI_INP_MODE_MASK,
> + VPE_EDI_INP_MODE_SHIFT);
> +
> + ctx->load_mmrs = true;
> +}
> +
> /*
> * Set the shadow registers whose values are modified when either the
> * source or destination format is changed.
> @@ -1111,6 +1128,15 @@ static void device_run(void *priv)
> ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> WARN_ON(ctx->dst_vb == NULL);
>
> + if (ctx->deinterlacing) {
> + /*
> + * we have output the first 2 frames through line average, we
> + * now switch to EDI de-interlacer
> + */
> + if (ctx->sequence == 2)
> + config_edi_input_mode(ctx, 0x3); /* EDI (Y + UV) */
> + }
> +
> /* config descriptors */
> if (ctx->dev->loaded_mmrs != ctx->mmr_adb.dma_addr || ctx->load_mmrs) {
> vpdma_map_desc_buf(ctx->dev->vpdma, &ctx->mmr_adb);
> @@ -1865,7 +1891,10 @@ static void vpe_buf_queue(struct vb2_buffer *vb)
>
> static int vpe_start_streaming(struct vb2_queue *q, unsigned int count)
> {
> - /* currently we do nothing here */
> + struct vpe_ctx *ctx = vb2_get_drv_priv(q);
> +
> + if (ctx->deinterlacing)
> + config_edi_input_mode(ctx, 0x0);
>
> return 0;
> }
>

\
 
 \ /
  Last update: 2016-10-17 16:15    [W:0.057 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site