lkml.org 
[lkml]   [2016]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 7/7] mtd: nand: move BBT code to drivers/mtd/nand/
Date
Now that the BBT code is generic, we can move it to drivers/mtd/nand/.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/Kconfig | 3 +++
drivers/mtd/nand/Makefile | 4 ++++
drivers/mtd/nand/{raw/nand_bbt.c => bbt.c} | 5 +++++
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/Makefile | 2 +-
5 files changed, 14 insertions(+), 1 deletion(-)
rename drivers/mtd/nand/{raw/nand_bbt.c => bbt.c} (99%)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 6d5373471809..1c1a1f487e20 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1 +1,4 @@
+config MTD_NAND_CORE
+ tristate
+
source "drivers/mtd/nand/raw/Kconfig"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index eee2f27e92fc..fe430d919224 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1 +1,5 @@
+obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
+
+nandcore-objs := bbt.o
+
obj-y += raw/
diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/bbt.c
similarity index 99%
rename from drivers/mtd/nand/raw/nand_bbt.c
rename to drivers/mtd/nand/bbt.c
index 0ad2c43adbd3..f308f1ed9fe0 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/bbt.c
@@ -1289,6 +1289,7 @@ int nand_scan_bbt(struct nand_device *this)
this->bbt.bbt = NULL;
return res;
}
+EXPORT_SYMBOL_GPL(nand_scan_bbt);

/**
* nand_update_bbt - update bad block table(s)
@@ -1342,6 +1343,7 @@ int nand_update_bbt(struct nand_device *this, loff_t offs)
kfree(buf);
return res;
}
+EXPORT_SYMBOL_GPL(nand_update_bbt);

/**
* nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
@@ -1355,6 +1357,7 @@ int nand_isreserved_bbt(struct nand_device *this, loff_t offs)
block = nand_offs_to_eraseblock(this, offs);
return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
}
+EXPORT_SYMBOL_GPL(nand_isreserved_bbt);

/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
@@ -1382,6 +1385,7 @@ int nand_isbad_bbt(struct nand_device *this, loff_t offs, int allowbbt)
}
return 1;
}
+EXPORT_SYMBOL_GPL(nand_isbad_bbt);

/**
* nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
@@ -1403,3 +1407,4 @@ int nand_markbad_bbt(struct nand_device *this, loff_t offs)

return ret;
}
+EXPORT_SYMBOL_GPL(nand_markbad_bbt);
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 7b7a887b4709..9b4b90039dc3 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -15,6 +15,7 @@ menuconfig MTD_NAND
depends on MTD
select MTD_NAND_IDS
select MTD_NAND_ECC
+ select MTD_NAND_CORE
help
This enables support for accessing all type of NAND flash
devices. For further information see
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index cafde6f3d957..1df932034ae2 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -59,4 +59,4 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o

-nand-objs := nand_base.o nand_bbt.o nand_timings.o
+nand-objs := nand_base.o nand_timings.o
--
2.7.4
\
 
 \ /
  Last update: 2016-10-16 16:48    [W:0.183 / U:4.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site