lkml.org 
[lkml]   [2016]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 4/4] AVR32-pio: Replace two seq_printf() calls by seq_puts() in pio_bank_show()
From
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sun, 16 Oct 2016 22:18:31 +0200

Strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
arch/avr32/mach-at32ap/pio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index abbe1b5..7fae6ec 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -367,9 +367,9 @@ static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip)
(mask & pdsr) ? "hi" : "lo",
(mask & pusr) ? " " : "up");
if (ifsr & mask)
- seq_printf(s, " deglitch");
+ seq_puts(s, " deglitch");
if ((osr & mdsr) & mask)
- seq_printf(s, " open-drain");
+ seq_puts(s, " open-drain");
if (imr & mask)
seq_printf(s, " irq-%d edge-both",
gpio_to_irq(chip->base + i));
--
2.10.1
\
 
 \ /
  Last update: 2016-10-16 22:36    [W:0.178 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site