lkml.org 
[lkml]   [2016]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/4] block: Add iocontext priority to request
From
Date
On 10/14/2016 08:35 PM, Adam Manzananares wrote:
> The 10/14/2016 07:54, Hannes Reinecke wrote:
>> On 10/13/2016 09:53 PM, Adam Manzanares wrote:
>>> Patch adds an association between iocontext ioprio and the ioprio of a
>>> request. This value is set in blk_rq_set_prio which takes the request and
>>> the ioc as arguments. If the ioc is valid in blk_rq_set_prio then the
>>> iopriority of the request is set as the iopriority of the ioc. In
>>> init_request_from_bio a check is made to see if the ioprio of the bio is
>>> valid and if so then the request prio comes from the bio.
>>>
>>> Signed-off-by: Adam Manzananares <adam.manzanares@wdc.com>
>>> ---
>>> block/blk-core.c | 4 +++-
>>> include/linux/blkdev.h | 14 ++++++++++++++
>>> 2 files changed, 17 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/block/blk-core.c b/block/blk-core.c
>>> index 14d7c07..361b1b9 100644
>>> --- a/block/blk-core.c
>>> +++ b/block/blk-core.c
>>> @@ -1153,6 +1153,7 @@ static struct request *__get_request(struct request_list *rl, int op,
>>>
>>> blk_rq_init(q, rq);
>>> blk_rq_set_rl(rq, rl);
>>> + blk_rq_set_prio(rq, ioc);
>>> req_set_op_attrs(rq, op, op_flags | REQ_ALLOCED);
>>>
>>> /* init elvpriv */
>>> @@ -1656,7 +1657,8 @@ void init_request_from_bio(struct request *req, struct bio *bio)
>>>
>>> req->errors = 0;
>>> req->__sector = bio->bi_iter.bi_sector;
>>> - req->ioprio = bio_prio(bio);
>>> + if (ioprio_valid(bio_prio(bio)))
>>> + req->ioprio = bio_prio(bio);
>>> blk_rq_bio_prep(req->q, req, bio);
>>> }
>>>
>>> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
>>> index c47c358..9a0ceaa 100644
>>> --- a/include/linux/blkdev.h
>>> +++ b/include/linux/blkdev.h
>>> @@ -934,6 +934,20 @@ static inline unsigned int blk_rq_count_bios(struct request *rq)
>>> }
>>>
>>> /*
>>> + * blk_rq_set_prio - associate a request with prio from ioc
>>> + * @rq: request of interest
>>> + * @ioc: target iocontext
>>> + *
>>> + * Assocate request prio with ioc prio so request based drivers
>>> + * can leverage priority information.
>>> + */
>>> +static inline void blk_rq_set_prio(struct request *rq, struct io_context *ioc)
>>> +{
>>> + if (ioc)
>>> + rq->ioprio = ioc->ioprio;
>>> +}
>>> +
>>> +/*
>>> * Request issue related functions.
>>> */
>>> extern struct request *blk_peek_request(struct request_queue *q);
>>>
>> Don't you need to check for 'ioprio_valid()' here, too?
>
> I poked around and it should be safe to not check for ioprio valid
> at this point. ioprio_valid only checks to see if the ioprio is
> not IOPRIO_CLASS_NONE. The request by default has a ioprio of none
> so if the ioc has ioprio of none we are not changing anything.
>
> The locations in the code that I found where the ioc prio is set are
> either filtered through the syscall handler, which checks for invalid
> priority combinations, or have valid priority values.
>
Thanks for the confirmation, that'll clarifies things.

Reviewed-by: Hannes Reinecke <hare@suse.com>

Cheers,

Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)

\
 
 \ /
  Last update: 2016-10-15 10:45    [W:0.041 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site