lkml.org 
[lkml]   [2016]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 1/3] ARM-OMAP2+: mux: Replace three seq_printf() calls by seq_puts()
From
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 15 Oct 2016 22:22:09 +0200

Strings which did not contain data format specification should be put into
a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
arch/arm/mach-omap2/mux.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 176eef6..4bdfa3d 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -561,7 +561,7 @@ static inline void omap_mux_decode(struct seq_file *s, u16 val)
do {
seq_printf(s, "%s", flags[i]);
if (i > 0)
- seq_printf(s, " | ");
+ seq_puts(s, " | ");
} while (i-- > 0);
}

@@ -602,7 +602,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
*/
seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
omap_mux_decode(s, val);
- seq_printf(s, "),\n");
+ seq_puts(s, "),\n");
}

return 0;
@@ -659,7 +659,7 @@ static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
partition->phys + m->reg_offset, m->reg_offset, val,
m->balls[0] ? m->balls[0] : none,
m->balls[1] ? m->balls[1] : none);
- seq_printf(s, "mode: ");
+ seq_puts(s, "mode: ");
omap_mux_decode(s, val);
seq_printf(s, "\n");
seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
--
2.10.1
\
 
 \ /
  Last update: 2016-10-15 22:53    [W:0.061 / U:3.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site