lkml.org 
[lkml]   [2016]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] debug: More properly delay for secondary CPUs
Date
We've got a delay loop waiting for secondary CPUs.  That loop uses
loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how
many tight loops make up a jiffy on all architectures. It is quite
common to see things like this in the boot log:
Calibrating delay loop (skipped), value calculated using timer
frequency.. 48.00 BogoMIPS (lpj=24000)

In my case I was seeing lots of cases where other CPUs timed out
entering the debugging only to print their stack crawls shortly after
the kdb> prompt was written.

It appears that other code with similar loops (like __spin_lock_debug)
adds an extra __delay(1) in there which makes it work better.
Presumably the __delay(1) is very safe. At least on modern ARM/ARM64
systems it will just do a CP15 instruction, which should be safe. On
older ARM systems it will fall back to an actual delay loop, or perhaps
another memory-mapped timer. On other platforms it must be safe too or
it wouldn't be used in __spin_lock_debug.

Note that we use __delay(100) instead of __delay(1) so we can get a
little closer to a more accurate timeout on systems where __delay() is
backed by a timer. It's better to have a more accurate timeout and the
only penalty is that we might wait an extra 99 "loops" before we enter
the debugger.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
kernel/debug/debug_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 0874e2edd275..454150d98dbc 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -598,11 +598,11 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
/*
* Wait for the other CPUs to be notified and be waiting for us:
*/
- time_left = loops_per_jiffy * HZ;
+ time_left = DIV_ROUND_UP(loops_per_jiffy * HZ, 100);
while (kgdb_do_roundup && --time_left &&
(atomic_read(&masters_in_kgdb) + atomic_read(&slaves_in_kgdb)) !=
online_cpus)
- cpu_relax();
+ __delay(100);
if (!time_left)
pr_crit("Timed out waiting for secondary CPUs.\n");

--
2.8.0.rc3.226.g39d4020
\
 
 \ /
  Last update: 2016-10-14 21:23    [W:0.050 / U:3.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site