lkml.org 
[lkml]   [2016]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[REGRESSION, bisect] pci: artpec-6: imprecise external abort
Date
Hello

Because of recent changes to drivers/pci/host/pcie-artpec6.c,
I was going to try out Bjorn's tag pci-v4.9-changes-2,
however I was greeted by an imprecise external abort:


[ 0.613082] Trying to unpack rootfs image as initramfs...
[ 0.886577] Freeing initrd memory: 4724K (c2900000 - c2d9d000)
[ 0.892685] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.901519] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.908151] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 0.920977] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.927408] NFS: Registering the id_resolver key type
[ 0.932505] Key type id_resolver registered
[ 0.936689] Key type id_legacy registered
[ 0.940742] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.946094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.953534] io scheduler noop registered
[ 0.957467] io scheduler deadline registered
[ 0.961859] io scheduler cfq registered (default)
[ 0.967829] libphy: mdio_driver_register: phy-bcm-ns2-pci
[ 0.975979] OF: PCI: host bridge /pcie@f8050000 ranges:
[ 0.981243] OF: PCI: IO 0xc0002000..0xc0011fff -> 0x00000000
[ 0.987179] OF: PCI: MEM 0xc0012000..0xdfffffff -> 0xc0012000
[ 0.993225] Unhandled fault: imprecise external abort (0x406) at 0x00000000
[ 1.000187] pgd = c0204000
[ 1.002892] [00000000] *pgd=00000000
[ 1.006471] Internal error: : 406 [#1] SMP ARM
[ 1.010910] Modules linked in:
[ 1.013968] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc1 #1
[ 1.020580] Hardware name: Axis ARTPEC-6 Platform
[ 1.025281] task: cb040000 task.stack: cb036000
[ 1.029822] PC is at dw_pcie_host_init+0x4b0/0x534
[ 1.034615] LR is at __irq_put_desc_unlock+0x14/0x38
[ 1.039579] pc : [<c063da6c>] lr : [<c03884bc>] psr: 60000053
[ 1.039579] sp : cb037e10 ip : 00010000 fp : c0ea3dc8
[ 1.051061] r10: c0ea3dc0 r9 : cbdd7c50 r8 : cb037e20
[ 1.056283] r7 : cb037e20 r6 : c1285fc8 r5 : 00000020 r4 : cb1ea250
[ 1.062808] r3 : d0824000 r2 : 00000000 r1 : 60000053 r0 : 00000000
[ 1.069334] Flags: nZCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
[ 1.076559] Control: 10c5387d Table: 0020404a DAC: 00000051
[ 1.082303] Process swapper/0 (pid: 1, stack limit = 0xcb036220)
[ 1.088306] Stack: (0xcb037e10 to 0xcb038000)
[ 1.092662] 7e00: c0cd721c c1285fc8 00000000 c0ea3c80
[ 1.100845] 7e20: cb1c1540 cb1c1680 c0ea523c 00000000 cb1ea250 cb0cc810 fffffdfb 00000000
[ 1.109028] 7e40: 00000000 00000000 cbfff2c0 c064673c 00010080 c0ea523c cb1ea250 fffffdfb
[ 1.117210] 7e60: cb0cc810 cb0cc810 c1286a70 c07a268c cb0cc810 c1349fa4 c1349fac c1286a70
[ 1.125393] 7e80: 00000000 c07a0e8c cb0cc810 c1286a70 cb0cc844 c12a4ff8 0000010b 00000007
[ 1.133575] 7ea0: 00000000 c07a0ff0 00000000 c1286a70 c07a0f38 c079f1e8 cb02bc5c cb0ce0b4
[ 1.141757] 7ec0: c1286a70 cb25e800 00000000 c07a032c c0ea526c c110dc5c c1286a70 c1286a70
[ 1.149940] 7ee0: c1033580 c110dc60 c10a3834 c07a1710 ffffe000 c1033580 c110dc60 c0301eb4
[ 1.158122] 7f00: c1235d08 00000000 00000000 c04709e0 c0c0b300 cb05ba80 00000000 c1234a38
[ 1.166304] 7f20: 60000053 00000003 00000001 00000000 c0eed190 c0f73f34 00000000 00000006
[ 1.174486] 7f40: 00000006 c0e4b55c c1234a20 c1309000 c1309000 c1309000 c110dc60 c10a3834
[ 1.182668] 7f60: 0000010b 00000007 c10a383c c1000dc0 00000006 00000006 00000000 c10005ac
[ 1.190850] 7f80: 00000000 00000000 c0b047f4 00000000 00000000 00000000 00000000 00000000
[ 1.199032] 7fa0: 00000000 c0b047fc 00000000 c0307e78 00000000 00000000 00000000 00000000
[ 1.207213] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.215395] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 7263306f 65756167
[ 1.223589] [<c063da6c>] (dw_pcie_host_init) from [<c064673c>] (artpec6_pcie_probe+0x118/0x1a0)
[ 1.232300] [<c064673c>] (artpec6_pcie_probe) from [<c07a268c>] (platform_drv_probe+0x4c/0xb0)
[ 1.240920] [<c07a268c>] (platform_drv_probe) from [<c07a0e8c>] (driver_probe_device+0x20c/0x2b8)
[ 1.249798] [<c07a0e8c>] (driver_probe_device) from [<c07a0ff0>] (__driver_attach+0xb8/0xbc)
[ 1.258250] [<c07a0ff0>] (__driver_attach) from [<c079f1e8>] (bus_for_each_dev+0x68/0x9c)
[ 1.266439] [<c079f1e8>] (bus_for_each_dev) from [<c07a032c>] (bus_add_driver+0x1a0/0x218)
[ 1.274710] [<c07a032c>] (bus_add_driver) from [<c07a1710>] (driver_register+0x78/0xf8)
[ 1.282723] [<c07a1710>] (driver_register) from [<c0301eb4>] (do_one_initcall+0x44/0x174)
[ 1.290919] [<c0301eb4>] (do_one_initcall) from [<c1000dc0>] (kernel_init_freeable+0x158/0x1e8)
[ 1.299636] [<c1000dc0>] (kernel_init_freeable) from [<c0b047fc>] (kernel_init+0x8/0x10c)
[ 1.307828] [<c0b047fc>] (kernel_init) from [<c0307e78>] (ret_from_fork+0x14/0x3c)
[ 1.315404] Code: eafffef9 e5943008 e5930900 f57ff04f (eaffff69)
[ 1.321503] ---[ end trace b458093682b1fb9a ]---


a git bisect later and the cause appears to be a0601a470537 ("PCI: designware: Add iATU Unroll feature")

the following patch gives me a working system again:

diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 035f50c03281..74510508fafc 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -637,11 +637,11 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
}

- pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
-
if (pp->ops->host_init)
pp->ops->host_init(pp);

+ pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
+
pp->root_bus_nr = pp->busn->start;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,

From the ARTPEC-6 SoC manual:
By default, the PCI Express interface shall be held in reset and clock-gated.
Software is required to enable the relevant modules
(turns on clocks and de-asserts reset) before these modules can be used.

Turning on the clocks and de-asserting reset is done in pp->ops->host_init().
We get an external abort when calling dw_pcie_iatu_unroll_enabled,
since that function does a read from the IP before we are allowed to do
AXI transfers (at least in the ARTPEC-6 case, might be the same for some
other SoCs).

It appears that dw_pcie_iatu_unroll_enabled was actually called _before_
host_init() in v4 of Joao's patch, but was changed to after host_init() in v5,
unfortunately the patch doesn't state a reason for the move.

\
 
 \ /
  Last update: 2016-10-14 14:43    [W:0.050 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site