lkml.org 
[lkml]   [2016]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/3] Broadcom STB AVS CPUfreq driver
On 12-10-16, 15:12, Markus Mayer wrote:
> This series contains the CPUfreq driver for Broadcom SoCs that use "AVS
> Firmware" for voltage and frequency scaling. All voltage and frequency
> transitions are performed by the firmware and are therefore hidden from
> Linux.
>
> The driver provides a standard CPUfreq interface to other kernel
> components and to userland on the one hand and communicates with the
> AVS co-processor on the other.
>
> Communication between the two processors is via shared mailbox
> registers and interrupts (ARM -> AVS to tell the firmware that there is
> a command to process and AVS -> ARM to tell the driver that a command
> finished executing).
>
> Changes from v3:
> - moved code from brcm_avs_cpufreq_exit() into brcm_avs_cpufreq_remove()
> - removed brcm_avs_cpufreq_exit() altogether

For the entire series:

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

--
viresh

\
 
 \ /
  Last update: 2016-10-13 07:46    [W:0.064 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site