lkml.org 
[lkml]   [2016]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"
Using "->" to indicate range is not too common, switch to ".."

Signed-off-by: Pavel Machek <pavel@ucw.cz>

--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -90,7 +90,7 @@ Some terms used in this document:-
operating parameters and is specified in the regulator
datasheet. i.e.

- - voltage output is in the range 800mV -> 3500mV.
+ - voltage output is in the range 800mV .. 3500mV.
- regulator current output limit is 20mA @ 5V but is
10mA @ 10V.

@@ -99,8 +99,8 @@ Some terms used in this document:-
power domain to a particular power range. i.e.

- Domain-1 voltage is 3300mV
- - Domain-2 voltage is 1400mV -> 1600mV
- - Domain-3 current limit is 0mA -> 20mA.
+ - Domain-2 voltage is 1400mV .. 1600mV
+ - Domain-3 current limit is 0mA .. 20mA.

Consumer Level: This is defined by consumer drivers
dynamically setting voltage or current limit levels.
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-10-11 09:33    [W:0.310 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site