lkml.org 
[lkml]   [2016]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2 03/12] ARM: dts: rockchip: override the clocks in i2s for kylin board
Date
Hi Caesar,

Am Donnerstag, 7. Januar 2016, 16:25:46 schrieb Caesar Wang:
> The sysclk seems be incorrect since we use the simple card for kylin
> board.
>
> The simple card call:
>
> asoc_simple_card_probe ->
> asoc_simple_card_dai_link_of ->
> asoc_simple_card_sub_parse_of ->
> ...
> clk = of_clk_get(args.np, 0);
> if (!IS_ERR(clk))
> dai->sysclk = clk_get_rate(clk);
>
> The sysclk come from the first clock, then first clock is hclk_i2s
> in i2s for rk3036 dtsi.
> So, we can override the clocks to fit the simple card in here.

It's not that effective, doing that change on a per-board level - as it
would possibly need to be repeated for future boards.
The i2s driver doesn't care, as it uses named clocks, so I instead did
the swap in the rk3036.dtsi for all boards. Can you check if that is ok
for you or if I did overlook something?


Thanks
Heiko

------- 8< -------
Subject: [PATCH] ARM: dts: rockchip: swap i2s clock ordering on rk3036

For sound setups using the simple-card mechanism, the main clock
(sysclk) is expected to be the first element. For the i2s-driver
itself it doesn't matter, as it uses named clocks, so we can just
swap them.

Reported-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3036.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 8f1bb0f..ee457a2 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -241,8 +241,8 @@
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- clock-names = "i2s_hclk", "i2s_clk";
- clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
dmas = <&pdma 0>, <&pdma 1>;
dma-names = "tx", "rx";
pinctrl-names = "default";
--
2.6.4

\
 
 \ /
  Last update: 2016-01-09 04:21    [W:0.319 / U:1.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site