lkml.org 
[lkml]   [2016]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RESEND RFC PATCH 2/2] ARM: dts: rockchip: Update the cpu freqs table
Date
Hi Xing,

Am Freitag, 8. Januar 2016, 19:31:38 schrieb Xing Zheng:
> Actually, we need more cpu freqs which are 50MHz integer multiples.
>
> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
> ---
>
> arch/arm/boot/dts/rk3036.dtsi | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
> index 1cb5877..1a773eb 100644
> --- a/arch/arm/boot/dts/rk3036.dtsi
> +++ b/arch/arm/boot/dts/rk3036.dtsi
> @@ -79,7 +79,18 @@
> resets = <&cru SRST_CORE0>;
> operating-points = <
> /* KHz uV */
> - 816000 1000000
> + 1200000 1200000
> + 1100000 1200000
> + 1000000 1200000
> + 900000 1200000
> + 800000 1200000
> + 700000 1200000
> + 600000 1200000
> + 500000 1200000
> + 400000 1200000
> + 300000 1200000
> + 200000 1200000
> + 100000 1200000

what about reducing the voltage as well?

From rk3288-specific discussions I remember that reducing the frequency
without touching the voltage, didn't really save so much energy.
And it looks like it was running 816MHz@1.0V just fine as well.

I guess you should find out which voltages are really necessary for each
step.


Heiko

\
 
 \ /
  Last update: 2016-01-08 21:01    [W:0.046 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site