lkml.org 
[lkml]   [2016]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/23] hisi_sas: add v2 int init and phy up handler
Date
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 171 +++++++++++++++++++++++++++++++++
1 file changed, 171 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 325b287..ba2f792 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -256,6 +256,11 @@ struct hisi_sas_complete_v2_hdr {
__le32 dw3;
};

+enum {
+ HISI_SAS_PHY_PHY_UPDOWN,
+ HISI_SAS_PHY_INT_NR
+};
+
#define HISI_SAS_COMMAND_ENTRIES_V2_HW 4096

static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
@@ -609,6 +614,167 @@ static void phys_init_v2_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}

+static void sl_notify_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 sl_control;
+
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+ msleep(1);
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+}
+
+static int phy_up_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
+{
+ int i, res = 0;
+ u32 context, port_id, link_rate, hard_phy_linkrate;
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
+ struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
+
+ /* Check for SATA dev */
+ context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
+ if (context & (1 << phy_no))
+ goto end;
+
+ if (phy_no == 8) {
+ u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);
+
+ port_id = (port_state & PORT_STATE_PHY8_PORT_NUM_MSK) >>
+ PORT_STATE_PHY8_PORT_NUM_OFF;
+ link_rate = (port_state & PORT_STATE_PHY8_CONN_RATE_MSK) >>
+ PORT_STATE_PHY8_CONN_RATE_OFF;
+ } else {
+ port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+ port_id = (port_id >> (4 * phy_no)) & 0xf;
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ }
+
+ if (port_id == 0xf) {
+ dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ for (i = 0; i < 6; i++) {
+ u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
+ RX_IDAF_DWORD0 + (i * 4));
+ frame_rcvd[i] = __swab32(idaf);
+ }
+
+ /* Get the linkrates */
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ sas_phy->linkrate = link_rate;
+ hard_phy_linkrate = hisi_sas_phy_read32(hisi_hba, phy_no,
+ HARD_PHY_LINKRATE);
+ phy->maximum_linkrate = hard_phy_linkrate & 0xf;
+ phy->minimum_linkrate = (hard_phy_linkrate >> 4) & 0xf;
+
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ memcpy(sas_phy->attached_sas_addr, &id->sas_addr, SAS_ADDR_SIZE);
+ dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
+ phy->port_id = port_id;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->phy_attached = 1;
+ phy->identify.device_type = id->dev_type;
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+ queue_work(hisi_hba->wq, &phy->phyup_ws);
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
+ CHL_INT0_SL_PHY_ENABLE_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 0);
+
+ return res;
+}
+
+static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ u32 irq_msk;
+ int phy_no = 0;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO)
+ >> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff;
+ while (irq_msk) {
+ if (irq_msk & 1) {
+ u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no,
+ CHL_INT0);
+
+ if (irq_value & CHL_INT0_SL_PHY_ENABLE_MSK)
+ /* phy up */
+ if (phy_up_v2_hw(phy_no, hisi_hba)) {
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ }
+ irq_msk >>= 1;
+ phy_no++;
+ }
+
+end:
+ return res;
+}
+
+static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_phy_updown_v2_hw,
+};
+
+/**
+ * There is a limitation in the hip06 chipset that we need
+ * to map in all mbigen interrupts, even if they are not used.
+ */
+static int interrupt_init_v2_hw(struct hisi_hba *hisi_hba)
+{
+ struct platform_device *pdev = hisi_hba->pdev;
+ struct device *dev = &pdev->dev;
+ int i, irq, rc, irq_map[128];
+
+
+ for (i = 0; i < 128; i++)
+ irq_map[i] = platform_get_irq(pdev, i);
+
+ for (i = 0; i < HISI_SAS_PHY_INT_NR; i++) {
+ int idx = i;
+
+ irq = irq_map[idx + 1]; /* Phy up/down is irq1 */
+ if (!irq) {
+ dev_err(dev, "irq init: fail map phy interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ rc = devm_request_irq(dev, irq, phy_interrupts[i], 0,
+ DRV_NAME " phy", hisi_hba);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "phy interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
+ return 0;
+}
+
static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
{
int rc;
@@ -617,6 +783,10 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)
if (rc)
return rc;

+ rc = interrupt_init_v2_hw(hisi_hba);
+ if (rc)
+ return rc;
+
phys_init_v2_hw(hisi_hba);

return 0;
@@ -624,6 +794,7 @@ static int hisi_sas_v2_init(struct hisi_hba *hisi_hba)

static const struct hisi_sas_hw hisi_sas_v2_hw = {
.hw_init = hisi_sas_v2_init,
+ .sl_notify = sl_notify_v2_hw,
.max_command_entries = HISI_SAS_COMMAND_ENTRIES_V2_HW,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v2_hdr),
};
--
1.9.1
\
 
 \ /
  Last update: 2016-01-08 16:01    [W:0.752 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site