lkml.org 
[lkml]   [2016]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 11/22] usb: dwc2: host: There's not really a TT for the root hub
Doug,

Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Thanks,
- Kever
On 01/29/2016 10:20 AM, Douglas Anderson wrote:
> I find that when I plug a full speed (NOT high speed) hub into a dwc2
> port and then I plug a bunch of devices into that full speed hub that
> dwc2 goes bat guano crazy. Specifically, it just spews errors like this
> in the console:
> usb usb1: clear tt 1 (9043) error -22
>
> The specific test case I used looks like this:
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
> |__ Port 1: Dev 17, If 0, Class=Hub, Driver=hub/4p, 12M
> |__ Port 2: Dev 19, If 0, ..., Driver=usbhid, 1.5M
> |__ Port 4: Dev 20, If 0, ..., Driver=usbhid, 12M
> |__ Port 4: Dev 20, If 1, ..., Driver=usbhid, 12M
> |__ Port 4: Dev 20, If 2, ..., Driver=usbhid, 12M
>
> Showing VID/PID:
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 017: ID 03eb:3301 Atmel Corp. at43301 4-Port Hub
> Bus 001 Device 020: ID 045e:0745 Microsoft Corp. Nano Transceiver ...
> Bus 001 Device 019: ID 046d:c404 Logitech, Inc. TrackMan Wheel
>
> I spent a bunch of time trying to figure out why there are errors to
> begin with. I believe that the issue may be a hardware issue where the
> transceiver sometimes accidentally sends a PREAMBLE packet if you send a
> packet to a full speed device right after one to a low speed device.
> Luckily the USB driver retries and the second time things work OK.
>
> In any case, things kinda seem work despite the errors, except for the
> "clear tt" spew mucking up my console. Chalk it up for a win for
> retries and robust protocols.
>
> So getting back to the "clear tt" problem, it appears that we get those
> because there's not actually a TT here to clear. It's my understanding
> that when dwc2 operates in low speed or full speed mode that there's no
> real TT out there. That makes all these attempts to "clear the TT"
> somewhat meaningless and also causes the spew in the log.
>
> Let's just skip all the useless TT clears. Eventually we should root
> cause the errors, but even if we do this is still a proper fix and is
> likely to avoid the "clear tt" error in the future.
>
> Note that hooking up a Full Speed USB Audio Device (Jabra 510) to this
> same hub with the keyboard / trackball shows that even audio works over
> this janky connection. As a point to note, this particular change (skip
> bogus TT clears) compared to just commenting out the dev_err() in
> hub_tt_work() actually produces better audio.
>
> Note: don't ask me where I got a full speed USB hub or whether the
> massive amount of dust that accumulated on it while it was in my junk
> box affected its funtionality. Just smile and nod.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> Changes in v6:
> - There's not really a TT for the root hub new for v6
>
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> drivers/usb/dwc2/hcd_intr.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> index 5d25a5ec9736..fe44870f84eb 100644
> --- a/drivers/usb/dwc2/hcd_intr.c
> +++ b/drivers/usb/dwc2/hcd_intr.c
> @@ -87,6 +87,7 @@ static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
> struct dwc2_host_chan *chan,
> struct dwc2_qtd *qtd)
> {
> + struct usb_device *root_hub = dwc2_hsotg_to_hcd(hsotg)->self.root_hub;
> struct urb *usb_urb;
>
> if (!chan->qh)
> @@ -102,6 +103,15 @@ static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg,
> if (!usb_urb || !usb_urb->dev || !usb_urb->dev->tt)
> return;
>
> + /*
> + * The root hub doesn't really have a TT, but Linux thinks it
> + * does because how could you have a "high speed hub" that
> + * directly talks directly to low speed devices without a TT?
> + * It's all lies. Lies, I tell you.
> + */
> + if (usb_urb->dev->tt->hub == root_hub)
> + return;
> +
> if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) {
> chan->qh->tt_buffer_dirty = 1;
> if (usb_hub_clear_tt_buffer(usb_urb))


\
 
 \ /
  Last update: 2016-01-31 11:01    [W:0.217 / U:32.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site