lkml.org 
[lkml]   [2016]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/7] tpm_crb: Use the common ACPI definition of struct acpi_tpm2
On Thu, Dec 17, 2015 at 11:23:14AM -0700, Jason Gunthorpe wrote:
> include/acpi/actbl2.h is the proper place for these definitions
> and the needed TPM2 ones have been there since
> commit 413d4a6defe0 ("ACPICA: Update TPM2 ACPI table")
>
> This also drops a couple of le32_to_cpu's for members of this table,
> the existing swapping was not done consistently, and the definitions
> in actbl2.h do not have endianness annotations, declaring that no swap
> is required. Note that the TPM ACPI spec defines all of these
> values to be little endian, both in crb2 and ppi.

I think this patch mixes two separate changes to the driver: removing
l32_to_cpu's and moving to common headers and that is not right.

Even if they should be removed I think what you say about actbl2.h is
wrong. Annotations are probably missing because it is imported code (I'm
happy to be corrected if this is not the case).

/Jarkko

> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
> drivers/char/tpm/tpm.h | 7 -------
> drivers/char/tpm/tpm_crb.c | 31 +++++++++----------------------
> drivers/char/tpm/tpm_tis.c | 2 +-
> 3 files changed, 10 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 542a80cbfd9c..28b477e8da6a 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -128,13 +128,6 @@ enum tpm2_startup_types {
> TPM2_SU_STATE = 0x0001,
> };
>
> -enum tpm2_start_method {
> - TPM2_START_ACPI = 2,
> - TPM2_START_FIFO = 6,
> - TPM2_START_CRB = 7,
> - TPM2_START_CRB_WITH_ACPI = 8,
> -};
> -
> struct tpm_chip;
>
> struct tpm_vendor_specific {
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> index 8342cf51ffdc..8dd70696ebe8 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -34,14 +34,6 @@ enum crb_defaults {
> CRB_ACPI_START_INDEX = 1,
> };
>
> -struct acpi_tpm2 {
> - struct acpi_table_header hdr;
> - u16 platform_class;
> - u16 reserved;
> - u64 control_area_pa;
> - u32 start_method;
> -} __packed;
> -
> enum crb_ca_request {
> CRB_CA_REQ_GO_IDLE = BIT(0),
> CRB_CA_REQ_CMD_READY = BIT(1),
> @@ -207,7 +199,7 @@ static const struct tpm_class_ops tpm_crb = {
> static int crb_acpi_add(struct acpi_device *device)
> {
> struct tpm_chip *chip;
> - struct acpi_tpm2 *buf;
> + struct acpi_table_tpm2 *buf;
> struct crb_priv *priv;
> struct device *dev = &device->dev;
> acpi_status status;
> @@ -217,13 +209,14 @@ static int crb_acpi_add(struct acpi_device *device)
>
> status = acpi_get_table(ACPI_SIG_TPM2, 1,
> (struct acpi_table_header **) &buf);
> - if (ACPI_FAILURE(status)) {
> - dev_err(dev, "failed to get TPM2 ACPI table\n");
> + if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) {
> + dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
> return -ENODEV;
> }
>
> /* Should the FIFO driver handle this? */
> - if (buf->start_method == TPM2_START_FIFO)
> + sm = buf->start_method;
> + if (sm == ACPI_TPM2_MEMORY_MAPPED)
> return -ENODEV;
>
> chip = tpmm_chip_alloc(dev, &tpm_crb);
> @@ -232,11 +225,6 @@ static int crb_acpi_add(struct acpi_device *device)
>
> chip->flags = TPM_CHIP_FLAG_TPM2;
>
> - if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
> - dev_err(dev, "TPM2 ACPI table has wrong size");
> - return -EINVAL;
> - }
> -
> priv = (struct crb_priv *) devm_kzalloc(dev, sizeof(struct crb_priv),
> GFP_KERNEL);
> if (!priv) {
> @@ -244,21 +232,20 @@ static int crb_acpi_add(struct acpi_device *device)
> return -ENOMEM;
> }
>
> - sm = le32_to_cpu(buf->start_method);
> -
> /* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
> * report only ACPI start but in practice seems to require both
> * ACPI start and CRB start.
> */
> - if (sm == TPM2_START_CRB || sm == TPM2_START_FIFO ||
> + if (sm == ACPI_TPM2_COMMAND_BUFFER || sm == ACPI_TPM2_MEMORY_MAPPED ||
> !strcmp(acpi_device_hid(device), "MSFT0101"))
> priv->flags |= CRB_FL_CRB_START;
>
> - if (sm == TPM2_START_ACPI || sm == TPM2_START_CRB_WITH_ACPI)
> + if (sm == ACPI_TPM2_START_METHOD ||
> + sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)
> priv->flags |= CRB_FL_ACPI_START;
>
> priv->cca = (struct crb_control_area __iomem *)
> - devm_ioremap_nocache(dev, buf->control_area_pa, 0x1000);
> + devm_ioremap_nocache(dev, buf->control_address, 0x1000);
> if (!priv->cca) {
> dev_err(dev, "ioremap of the control area failed\n");
> return -ENOMEM;
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 8a3509cb10da..304323bdcaaa 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -135,7 +135,7 @@ static inline int is_fifo(struct acpi_device *dev)
> return 0;
> }
>
> - if (le32_to_cpu(tbl->start_method) != TPM2_START_FIFO)
> + if (tbl->start_method != ACPI_TPM2_MEMORY_MAPPED)
> return 0;
>
> /* TPM 2.0 FIFO */
> --
> 2.1.4
>


\
 
 \ /
  Last update: 2016-01-03 18:41    [W:0.123 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site