lkml.org 
[lkml]   [2016]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 1/1] pci: fix unavailable irq number 255 reported by BIOS
Hi Chen,

Thanks a lot for persevering and working this all out!

On Thu, Jan 28, 2016 at 09:35:46AM +0800, Chen Fan wrote:
> In our X86 environment, when enable Secure boot, we found an abnormal
> phenomenon as following call trace shows. after investigation, we
> found the firmware assigned an irq number 255 which means unknown
> or no connection in PCI local spec for i801_smbus, meanwhile the
> ACPI didn't configure the pci irq routing. and the 255 irq number
> was assigned for megasa msix without IRQF_SHARED. then in this case
> during i801_smbus probe, the i801_smbus driver would request irq with
> bad irq number 255. but the 255 irq number was assigned for memgasa
> with MSIX enable. which will cause request_irq fails and result in
> the call trace below, here we introduce an IRQ_NOTCONNECTED to identify
> the device interrupt is not connected.
>
> i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
> i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
> i801_smbus 0000:00:1f.3: PCI INT C: no GSI
> genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa)
> CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1
> Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5
>
> Call Trace:
> dump_stack+0x19/0x1b
> __setup_irq+0x54a/0x570
> request_threaded_irq+0xcc/0x170
> i801_probe+0x32f/0x508 [i2c_i801]
> local_pci_probe+0x45/0xa0
> i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16
> i801_smbus: probe of 0000:00:1f.3 failed with error -16
>
> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: Bjorn Helgaas <helgaas@kernel.org>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Rafael, I assume you'll take this if you think it's ready.

This is a subtle problem and, if I understand correctly, can manifest
intermittently depending on the machine configuration. For example,
if you got rid of the "megasa" driver, I suspect i801_smbus would not
complain, but it wouldn't work.

I think we might want to consider doing something for non-x86 arches
as well, but we can do that later. I propose a changelog like the
following. Please correct anything I got wrong. I suspect we will be
revisiting this issue eventually, so I'd like to have a good
description.


x86/PCI: Recognize that Interrupt Line 255 means "not connected"

Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in
the Interrupt Line register means "unknown" or "no connection."
Previously, when we couldn't derive an IRQ from the _PRT, we fell back to
using the value from Interrupt Line as an IRQ. It's questionable whether
we should do that at all, but the spec clearly suggests we shouldn't do it
for the value 255 on x86.

Calling request_irq() with IRQ 255 may succeed, but the driver won't
receive any interrupts. Or, if IRQ 255 is shared with another device, it
may succeed, and the driver's ISR will be called at random times when the
*other* device interrupts. Or it may fail if another device is using IRQ
255 with incompatible flags. What we *want* is for request_irq() to fail
predictably so the driver can fall back to polling.

On x86, assume 255 in the Interrupt Line means the INTx line is not
connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq()
will fail gracefully with -ENOTCONN.

We found this problem on a system where Secure Boot firmware assigned
Interrupt Line 255 to an i801_smbus device and another device was already
using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if
request_irq() fails:

i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C
i801_smbus 0000:00:1f.3: PCI INT C: no GSI
genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa)
CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1
Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5
Call Trace:
dump_stack+0x19/0x1b
__setup_irq+0x54a/0x570
request_threaded_irq+0xcc/0x170
i801_probe+0x32f/0x508 [i2c_i801]
local_pci_probe+0x45/0xa0
i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16
i801_smbus: probe of 0000:00:1f.3 failed with error -16

After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"),
i801_probe() will fall back to polling if request_irq() fails. But we
still need this patch because request_irq() may succeed or fail depending
on other devices in the system. If request_irq() fails, i801_smbus will
work by falling back to polling, but if it succeeds, i801_smbus won't work
because it expects interrupts that it may not receive.

> ---
> drivers/acpi/pci_irq.c | 20 ++++++++++++++++++++
> include/linux/interrupt.h | 10 ++++++++++
> kernel/irq/manage.c | 9 ++++++++-
> 3 files changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index d30184c..dda6d25 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -33,6 +33,7 @@
> #include <linux/pci.h>
> #include <linux/acpi.h>
> #include <linux/slab.h>
> +#include <linux/interrupt.h>
>
> #define PREFIX "ACPI: "
>
> @@ -387,6 +388,22 @@ static inline int acpi_isa_register_gsi(struct pci_dev *dev)
> }
> #endif
>
> +static inline bool acpi_pci_irq_valid(struct pci_dev *dev)
> +{
> +#ifdef CONFIG_X86
> + /*
> + * On x86 irq line 0xff means "unknown" or "no connection" (PCI 3.0,
> + * Section 6.2.4, footnote on page 223).
> + */
> + if (dev->irq == 0xff) {
> + dev->irq = IRQ_NOTCONNECTED;
> + dev_warn(&dev->dev, "PCI INT not connected\n");
> + return false;
> + }
> +#endif
> + return true;
> +}
> +
> int acpi_pci_irq_enable(struct pci_dev *dev)
> {
> struct acpi_prt_entry *entry;
> @@ -409,6 +426,9 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
> if (pci_has_managed_irq(dev))
> return 0;
>
> + if (!acpi_pci_irq_valid(dev))
> + return 0;
> +
> entry = acpi_pci_irq_lookup(dev, pin);
> if (!entry) {
> /*
> diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> index cb30edb..12f7da4 100644
> --- a/include/linux/interrupt.h
> +++ b/include/linux/interrupt.h
> @@ -125,6 +125,16 @@ struct irqaction {
>
> extern irqreturn_t no_action(int cpl, void *dev_id);
>
> +/*
> + * If a (PCI) device interrupt is not connected we set dev->irq to
> + * IRQ_NOTCONNECTED. This causes request_irq() to fail with -ENOTCONN, so we
> + * can distingiush that case from other error returns.
> + *
> + * 0x80000000 is guaranteed to be outside the available range of interrupts
> + * and easy to distinguish from other possible incorrect values.
> + */
> +#define IRQ_NOTCONNECTED (1U << 31)
> +
> extern int __must_check
> request_threaded_irq(unsigned int irq, irq_handler_t handler,
> irq_handler_t thread_fn,
> diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
> index 8411872..e79e60f 100644
> --- a/kernel/irq/manage.c
> +++ b/kernel/irq/manage.c
> @@ -1609,6 +1609,9 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
> struct irq_desc *desc;
> int retval;
>
> + if (irq == IRQ_NOTCONNECTED)
> + return -ENOTCONN;
> +
> /*
> * Sanity-check: shared interrupts must pass in a real dev-ID,
> * otherwise we'll have trouble later trying to figure out
> @@ -1699,9 +1702,13 @@ EXPORT_SYMBOL(request_threaded_irq);
> int request_any_context_irq(unsigned int irq, irq_handler_t handler,
> unsigned long flags, const char *name, void *dev_id)
> {
> - struct irq_desc *desc = irq_to_desc(irq);
> + struct irq_desc *desc;
> int ret;
>
> + if (irq == IRQ_NOTCONNECTED)
> + return -ENOTCONN;
> +
> + desc = irq_to_desc(irq);
> if (!desc)
> return -EINVAL;
>
> --
> 1.9.3
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-01-28 22:41    [W:0.094 / U:3.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site