lkml.org 
[lkml]   [2016]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] misc: at24: replace memory_accessor with nvmem_device_read
Date
Now that the AT24 uses the NVMEM framework, replace the
memory_accessor in the setup() callback with nvmem API calls.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/mach-davinci/board-mityomapl138.c | 5 +++--
arch/arm/mach-davinci/common.c | 4 ++--
drivers/misc/eeprom/at24.c | 31 +-----------------------------
include/linux/davinci_emac.h | 4 ++--
include/linux/memory.h | 11 -----------
include/linux/platform_data/at24.h | 10 +++++-----
6 files changed, 13 insertions(+), 52 deletions(-)

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index de1316bf643a..62ebac51bab9 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum)
static void mityomapl138_cpufreq_init(const char *partnum) { }
#endif

-static void read_factory_config(struct memory_accessor *a, void *context)
+static void read_factory_config(struct nvmem_device *nvmem, void *context)
{
int ret;
const char *partnum = NULL;
struct davinci_soc_info *soc_info = &davinci_soc_info;

- ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
+ ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
+ &factory_config);
if (ret != sizeof(struct factory_config)) {
pr_warn("Read Factory Config Failed: %d\n", ret);
goto bad_config;
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index a794f6d9d444..f55ef2ef2f92 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info);
void __iomem *davinci_intc_base;
int davinci_intc_type;

-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
{
char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
off_t offset = (off_t)context;

/* Read MAC addr from EEPROM */
- if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
}

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f15cda93fc4c..089d6943f68a 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -56,7 +56,6 @@

struct at24_data {
struct at24_platform_data chip;
- struct memory_accessor macc;
int use_smbus;
int use_smbus_write;

@@ -410,30 +409,6 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
/*-------------------------------------------------------------------------*/

/*
- * This lets other kernel code access the eeprom data. For example, it
- * might hold a board's Ethernet address, or board-specific calibration
- * data generated on the manufacturing floor.
- */
-
-static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf,
- off_t offset, size_t count)
-{
- struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-
- return at24_read(at24, buf, offset, count);
-}
-
-static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
- off_t offset, size_t count)
-{
- struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-
- return at24_write(at24, buf, offset, count);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
* Provide a regmap interface, which is registered with the NVMEM
* framework
*/
@@ -600,16 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
at24->chip = chip;
at24->num_addresses = num_addresses;

- at24->macc.read = at24_macc_read;
-
writable = !(chip.flags & AT24_FLAG_READONLY);
if (writable) {
if (!use_smbus || use_smbus_write) {

unsigned write_max = chip.page_size;

- at24->macc.write = at24_macc_write;
-
if (write_max > io_limit)
write_max = io_limit;
if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
@@ -683,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)

/* export data to kernel code */
if (chip.setup)
- chip.setup(&at24->macc, chip.context);
+ chip.setup(at24->nvmem, chip.context);

return 0;

diff --git a/include/linux/davinci_emac.h b/include/linux/davinci_emac.h
index 542888504994..05b97144d342 100644
--- a/include/linux/davinci_emac.h
+++ b/include/linux/davinci_emac.h
@@ -12,7 +12,7 @@
#define _LINUX_DAVINCI_EMAC_H

#include <linux/if_ether.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>

struct mdio_platform_data {
unsigned long bus_freq;
@@ -46,5 +46,5 @@ enum {
EMAC_VERSION_2, /* DM646x */
};

-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
#endif
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 8b8d8d12348e..b723a686fc10 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -137,17 +137,6 @@ extern struct memory_block *find_memory_block(struct mem_section *);
#endif

/*
- * 'struct memory_accessor' is a generic interface to provide
- * in-kernel access to persistent memory such as i2c or SPI EEPROMs
- */
-struct memory_accessor {
- ssize_t (*read)(struct memory_accessor *, char *buf, off_t offset,
- size_t count);
- ssize_t (*write)(struct memory_accessor *, const char *buf,
- off_t offset, size_t count);
-};
-
-/*
* Kernel text modification mutex, used for code patching. Users of this lock
* can sleep.
*/
diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h
index c42aa89d34ee..dc9a13e5acda 100644
--- a/include/linux/platform_data/at24.h
+++ b/include/linux/platform_data/at24.h
@@ -9,7 +9,7 @@
#define _LINUX_AT24_H

#include <linux/types.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>

/**
* struct at24_platform_data - data to set up at24 (generic eeprom) driver
@@ -17,7 +17,7 @@
* @page_size: number of byte which can be written in one go
* @flags: tunable options, check AT24_FLAG_* defines
* @setup: an optional callback invoked after eeprom is probed; enables kernel
- code to access eeprom via memory_accessor, see example
+ code to access eeprom via nvmem, see example
* @context: optional parameter passed to setup()
*
* If you set up a custom eeprom type, please double-check the parameters.
@@ -26,13 +26,13 @@
*
* An example in pseudo code for a setup() callback:
*
- * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
+ * void get_mac_addr(struct mvmem_device *nvmem, void *context)
* {
* u8 *mac_addr = ethernet_pdata->mac_addr;
* off_t offset = context;
*
* // Read MAC addr from EEPROM
- * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
* pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
* }
*
@@ -48,7 +48,7 @@ struct at24_platform_data {
#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */
#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */

- void (*setup)(struct memory_accessor *, void *context);
+ void (*setup)(struct nvmem_device *nvmem, void *context);
void *context;
};

--
2.7.0
\
 
 \ /
  Last update: 2016-01-28 17:21    [W:0.131 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site