lkml.org 
[lkml]   [2016]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 11/13] dtb: amd: Add PCIe SMMU device tree node
On Thu, Jan 28, 2016 at 11:17:39AM +0000, Will Deacon wrote:
> On Thu, Jan 28, 2016 at 11:14:53AM +0000, Mark Rutland wrote:
> > On Wed, Jan 27, 2016 at 03:11:59PM -0600, Suravee Suthikulpanit wrote:
> > > From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> > >
> > > Add PCIe SMMU device tree node for AMD Seattle SOC.
> > >
> > > Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
> > > ---
> > > arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 23 +++++++++++++++++++++++
> > > 1 file changed, 23 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
> > > index a7fc059..bfccfea 100644
> > > --- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
> > > +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
> > > @@ -210,6 +210,7 @@
> > > device_type = "pci";
> > > bus-range = <0 0x7f>;
> > > msi-parent = <&v2m0>;
> > > + #stream-id-cells = <16>;
> > > reg = <0 0xf0000000 0 0x10000000>;
> > >
> > > interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
> > > @@ -230,6 +231,28 @@
> > > <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
> > > };
> > >
> > > + pcie0_smmu: smmu@e0a00000 {
> > > + compatible = "arm,mmu-401";
> > > + reg = <0 0xe0a00000 0 0x10000>;
> > > + #global-interrupts = <1>;
> > > + interrupts = /* Uses combined intr for both
> > > + * global and context
> > > + */
> > > + <0 333 4>,
> > > + <0 333 4>;
> > > + /* Note:
> > > + * SID[2:0] = PCIe function number
> > > + * SID[7:3] = PCIe device number
> > > + * SID[14:8] = PCIe bus number
> > > + */
> > > + mmu-masters = <&pcie0
> > > + /* 1:00:[0,3] */ 256 257 258 259
> > > + /* 2:00:[0,3] */ 512 513 514 515
> > > + /* 3:00:[0,3] */ 768 769 770 771
> > > + /* 4:00:[0,3] */ 1024 1025 1026 1027
> > > + >;
> > > + };
> >
> > This doesn't look right to me.
> >
> > I didn't think that RID->SID mapping was actually defined by any
> > binding, so (how) are these numbers used?
> >
> > I'm uncomfortable with this, given we should be moving towards the
> > generic IOMMU binding (and then we'd use the iommu-map binding [1] for
> > this).
> >
> > Will, Robin, thoughts?
>
> The driver currently assumes a 1:1 RID:SID mapping when it sees a PCI
> device, so those numbers should be ignored.

Given that, they shouldn't be in the DT, then?

Mark.

\
 
 \ /
  Last update: 2016-01-28 13:01    [W:0.448 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site