lkml.org 
[lkml]   [2016]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] watchdog: Add watchdog timer support for the WinSystems EBC-C384
> > 8-bit read of 299h – save this value
> > 8-bit write of 60h to 299h
> > 16-bit read of 29ah should return the base address of the WDT which is 564h
> > 8-bit write of saved value to 299h - don’t want t accidentally change the WDT base address
>
> If the system does return a value of 0x564, then it's pretty safe to say
> that the watchdog timer is implemented on the chip. However, I'm not
> sure it would be safe to send write commands to a port address until the
> hardware has been identified; this second method may not be the best
> route either.
>
> What do you think?

Pokng at 299/29a could hang other systems, so DMI is definitely
preferable if it's not described in ACPI as it perhaps ought to have
been. If all boards with that DMI string have the device then sorted, if
not then perhaps check 299/29a after the DMI match.

Alan

\
 
 \ /
  Last update: 2016-01-28 12:41    [W:0.065 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site