lkml.org 
[lkml]   [2016]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PCI device driver broken between 4.2 and 4.3
On Wed, Jan 27, 2016 at 12:38:06PM +0300, Мороз Олег wrote:
> Also, my drive has no
>
> pcibios_enable_device()
> pcibios_alloc_irq()
>
> calls.

Those are internal interfaces used by the PCI core. Drivers shouldn't
call them directly. Drivers normally call pci_enable_device(), and
those internal interfaces are used in that path.

> 26.01.2016 22:05, Олег Мороз пишет:
> >I confirmed it works in
> >
> >890e4847587f
> >
> >and do not works in
> >
> >991de2e59090
> >
> >26.01.2016 18:32, Bjorn Helgaas пишет:
> >>[+cc Jiang]
> >>
> >>On Mon, Jan 25, 2016 at 03:52:51PM -0600, Bjorn Helgaas wrote:
> >>>Hi Олег,
> >>>
> >>>On Sun, Jan 24, 2016 at 04:50:08PM +0300, Олег Мороз wrote:
> >>>>Okay. I've sent logs (dmesg and lspci) from both 4.2 and 4.3
> >>>>to bugzilla
> >>>I don't see anything wrong in either log. Both v4.2 and v4.3
> >>>enumerate the device the same way, and the driver seems to claim it
> >>>the same way:
> >>>
> >>> pci 0000:0d:00.0: [10b5:9030] type 00 class 0x078000
> >>> pci 0000:0d:00.0: reg 0x14: [io 0x2100-0x217f]
> >>> pci 0000:0d:00.0: reg 0x18: [io 0x2380-0x239f]
> >>> pci 0000:0d:00.0: PME# supported from D0 D3hot
> >>> pci 0000:0d:01.0: [10b5:9030] type 00 class 0x078000
> >>> pci 0000:0d:01.0: reg 0x14: [io 0x2180-0x21ff]
> >>> pci 0000:0d:01.0: reg 0x18: [io 0x23a0-0x23bf]
> >>> pci 0000:0d:01.0: PME# supported from D0 D3hot
> >>> pci 0000:0d:02.0: [10b5:9030] type 00 class 0x078000
> >>> pci 0000:0d:02.0: reg 0x14: [io 0x2200-0x227f]
> >>> pci 0000:0d:02.0: reg 0x18: [io 0x2280-0x22ff]
> >>> pci 0000:0d:02.0: reg 0x1c: [io 0x2300-0x237f]
> >>> pci 0000:0d:02.0: PME# supported from D0 D3hot
> >>>
> >>> sja1000_plx_pci 0000:0d:02.0: Detected "Eclus CAN-200-PCI"
> >>>card at slot #2
> >>> sja1000_plx_pci 0000:0d:02.0: Channel #1 at
> >>>0x0000000000012280, irq 22 registered as can0
> >>> sja1000_plx_pci 0000:0d:02.0: Channel #2 at
> >>>0x0000000000012300, irq 22 registered as can1
> >>> sja1000_plx_pci 0000:0d:02.0 can0: setting BTR0=0x03 BTR1=0x37
> >>>
> >>>One option is always to bisect between v4.2 and v4.3 to see which
> >>>commit made it stop working. See https://git-scm.com/docs/git-bisect
> >>Jiang, Олег bisected this to 991de2e59090 ("PCI, x86: Implement
> >>pcibios_alloc_irq() and pcibios_free_irq()").
> >>
> >>Олег, please double-check and confirm that 890e4847587f works and
> >>991de2e59090 fails.
> >>
> >>Then please add some printks in the pcibios_enable_device() and
> >>pcibios_alloc_irq() paths and in your driver to see exactly what changed
> >>between 890e4847587f and 991de2e59090
> >>
> >>Bjorn
> >>
> >>>>23.01.2016 17:54, Bjorn Helgaas пишет:
> >>>>>[+cc linux-kernel]
> >>>>>
> >>>>>Hi Олег,
> >>>>>
> >>>>>On Sat, Jan 23, 2016 at 1:08 AM, Олег Мороз
> >>>>><oleg.moroz@mcc.vniiem.ru> wrote:
> >>>>>>Hello. I've got a device driver for MIL-1553b card
> >>>>>>called TA1-PCI, which
> >>>>>>could be found at
> >>>>>>https://github.com/qmor/elcus-1553-driver-linux
> >>>>>>Card is using PLX_PCI9030 PCI controller.
> >>>>>>Today i've found that this driver compiles, installes,
> >>>>>>but is not working as
> >>>>>>it should.
> >>>>>>Looks like it not receives any interrupts from PCI. I've
> >>>>>>test it again with
> >>>>>>kernel
> >>>>>>4.2 and it works okay. What changes was made in PCI
> >>>>>>subsystem from 4.2 to
> >>>>>>4.3
> >>>>>>which could have impact this driver work.
> >>>>>Thank you very much for this problem report. There were many PCI
> >>>>>changes between v4.2 and v4.3, and without more information, I can't
> >>>>>guess what might be causing this problem.
> >>>>>
> >>>>>I opened a bug report at
> >>>>>https://bugzilla.kernel.org/show_bug.cgi?id=111211
> >>>>>
> >>>>>Please attach complete dmesg logs for both v4.2 and v4.3 to that bug
> >>>>>report. Also, please attach the complete "lspci -vv" output (as
> >>>>>root).
> >>>>>
> >>>>>Thanks!
> >>>>>
> >>>>>Bjorn
> >>>>--
> >>>>To unsubscribe from this list: send the line "unsubscribe
> >>>>linux-pci" in
> >>>>the body of a message to majordomo@vger.kernel.org
> >>>>More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>>--
> >>>To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> >>>the body of a message to majordomo@vger.kernel.org
> >>>More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-01-27 14:41    [W:0.060 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site