lkml.org 
[lkml]   [2016]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v2] ata: add AMD Seattle platform driver
    From
    Date
    Hi,

    On 25-01-16 21:43, Tejun Heo wrote:
    > On Thu, Jan 14, 2016 at 10:31:11AM -0600, Brijesh Singh wrote:
    >> AMD Seattle SATA controller mostly conforms to AHCI interface with some
    >> special register to control SGPIO interface. In the case of an AHCI
    >> controller, the SGPIO feature is ideally implemented using the
    >> "Enclosure Management" register of the AHCI controller, but those
    >> registeres are not implemented in the Seattle SoC. Instead SoC
    >> (Rev B0 onwards) provides a 32-bit SGPIO control register which should
    >> be programmed to control the activity, locate and fault LEDs.
    >>
    >> The driver is based on ahci_platform driver.
    >>
    >> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
    >> Acked-by: Hans de Goede <hdegoede@redhat.com>
    >> CC: tj@kernel.org
    >> CC: linux-ide@vger.kernel.org
    >
    > Hans, can you please review the patch?

    Done, driver looks good to me:

    Acked-by: Hans de Goede <hdegoede@redhat.com>

    Regards,

    Hans

    \
     
     \ /
      Last update: 2016-01-26 11:21    [W:3.918 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site