lkml.org 
[lkml]   [2016]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 12/16] ARM: Xen: Document UEFI support on Xen ARM virtual platforms
On Mon, 18 Jan 2016, Mark Rutland wrote:
> On Fri, Jan 15, 2016 at 02:55:25PM +0800, Shannon Zhao wrote:
> > From: Shannon Zhao <shannon.zhao@linaro.org>
> >
> > Add a "uefi" node under /hypervisor node in FDT, then Linux kernel could
> > scan this to get the UEFI information.
> >
> > Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> > ---
> > Documentation/devicetree/bindings/arm/xen.txt | 42 +++++++++++++++++++++++++++
> > 1 file changed, 42 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
> > index 0f7b9c2..fbc17ae 100644
> > --- a/Documentation/devicetree/bindings/arm/xen.txt
> > +++ b/Documentation/devicetree/bindings/arm/xen.txt
> > @@ -15,6 +15,36 @@ the following properties:
> > - interrupts: the interrupt used by Xen to inject event notifications.
> > A GIC node is also required.
> >
> > +To support UEFI on Xen ARM virtual platforms, Xen pupulates the FDT "uefi" node
> > +under /hypervisor with following parameters:
>
> s/pupulates/populates/
>
> > +
> > +________________________________________________________________________________
> > +Name | Size | Description
> > +================================================================================
> > +xen,uefi-system-table | 64-bit | Guest physical address of the UEFI System
> > + | | Table.
> > +--------------------------------------------------------------------------------
> > +xen,uefi-mmap-start | 64-bit | Guest physical address of the UEFI memory
> > + | | map.
> > +--------------------------------------------------------------------------------
> > +xen,uefi-mmap-size | 32-bit | Size in bytes of the UEFI memory map
> > + | | pointed to in previous entry.
> > +--------------------------------------------------------------------------------
> > +xen,uefi-mmap-desc-size | 32-bit | Size in bytes of each entry in the UEFI
> > + | | memory map.
> > +--------------------------------------------------------------------------------
> > +xen,uefi-mmap-desc-ver | 32-bit | Version of the mmap descriptor format.
> > +--------------------------------------------------------------------------------
> > +
> > +Below is the format of the mmap descriptor.
> > +typedef struct {
> > + u32 type;
> > + u32 pad;
> > + u64 phys_addr;
> > + u64 virt_addr;
> > + u64 num_pages;
> > + u64 attribute;
> > +} efi_memory_desc_t;
>
> I don't think we should describe this here, as it duplicates the UEFI
> spec, and is techincally incorrect the above is only guaranteed to be
> the prefix of each memory descriptor -- that's why the
> uefi-mmap-desc-size property exists.
>
> We don't do this in Documentation/arm/uefi.txt, and I don't see why we
> should do so here.
>
> Does Xen handle arbitrary size memory map descriptors? I'm not sure what
> new information might be passed in future additions to the descriptor
> format, and I'm not sure what should happen in the Dom0 case.

Xen passes to Dom0 the memory map in the same format as the native
memory map.


> > Example (assuming #address-cells = <2> and #size-cells = <2>):
> >
> > @@ -22,4 +52,16 @@ hypervisor {
> > compatible = "xen,xen-4.3", "xen,xen";
> > reg = <0 0xb0000000 0 0x20000>;
> > interrupts = <1 15 0xf08>;
> > + uefi {
> > + xen,uefi-system-table = <0xXXXXXXXX>;
> > + xen,uefi-mmap-start = <0xXXXXXXXX>;
> > + xen,uefi-mmap-size = <0xXXXXXXXX>;
> > + xen,uefi-mmap-desc-size = <0xXXXXXXXX>;
> > + xen,uefi-mmap-desc-ver = <0xXXXXXXXX>;
> > + };
> > };
> > +
> > +These "xen,uefi-*" parameters are similar to those in Documentation/arm/uefi.txt
> > +which are used by normal UEFI. But to Xen ARM virtual platforms, it needs to
> > +introduce a Xen specific UEFI and it doesn't want to mix with normal UEFI.
> > +Therefore, it defines these parameters under /hypervisor node.
>
> Could we please describe what that actual difference is?
>
> I know that the OS must handle a system table differently under Xen, but
> this doesn't describe what it should do.

For a reference, the hypercall interface is described in not so many words here:

include/xen/interface/platform.h
http://xenbits.xen.org/gitweb/?p=xen.git;a=blob_plain;f=xen/include/public/platform.h;hb=HEAD

However it is clear that platform.h also contains some x86 specific
calls, for example xenpf_set_processor_pminfo. It might be a good idea
to list the calls that are available on ARM64.


> I assume that the OS can handle the memory map in an identical fashion
> to when it is native. Is that true?

Yes, I think that's true.

\
 
 \ /
  Last update: 2016-01-18 19:01    [W:0.101 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site