lkml.org 
[lkml]   [2016]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v2 1/4] Documentation: fsl-quadspi: Add fsl,ls2080a-dspi compatible string
Date
On Wed, Jan 13, 2016 at 06:13 AM, Rob Herring wrote:
> On Mon, Jan 11, 2016 at 10:36 PM, Yao Yuan <yao.yuan@nxp.com> wrote:
> > On Thu, Dec 31, 2015 at 10:35PM, Yao Yuan <yao.yuan@nxp.com> wrote:
> >> On Wed, Dec 30, 2015 at 11:20 PM, Rob Herring wrote:
> >> > On Tue, Dec 29, 2015 at 9:17 PM, Yao Yuan <yao.yuan@nxp.com> wrote:
> >> > > Hi Rob,
> >> > >
> >> > > Thanks for your review.
> >> > > So you mean that I should add the commit message for why I add
> >> > > this new
> >> > compatible?
> >> >
> >> > Please don't top post on the lists.
> >> >
> >> > No, the binding doc should explain what are valid combinations of
> >> > compatible strings and the order when the dts can have multiple
> >> > strings. For example, is this valid:
> >> >
> >> > compatible = "fsl,vf610-dspi", "fsl,ls2080a-dspi";
> >> >
> >> > In other words, I should be able to check a dts file against what
> >> > the binding doc says.
> >> >
> >> > Rob
> >>
> >> OK, I got it.
> >> The "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi" is
> >> valid and used in driver.
> >> But "fsl,ls2080a-dspi" is just used for platform flag.
> >> Could you help to give an example that how can I explain it in Documents?
> >> Or should I not write this compatible in Document.
> >>
> >> I find that many compatible strings like this (not valid just a
> >> platform flag) for other driver are not record in document.
>
> Well, things sneak in without getting documented. Also, lots of PPC bindings
> predate our documentation requirement.
>
> >>
> >> Thanks.
> >>
> >> Yuan Yao
> >
> > Hi Rob,
> > How about like this:
> > diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
> > b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
> > index 00c587b..7a9a523 100644
> > --- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
> > +++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
> > @@ -4,6 +4,8 @@ Required properties:
> > - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
> > "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
> > "fsl,ls1021-qspi"
> > + Invalid compatible just for SOC flag:
> > + "fsl,ls2080a-qspi"
>
> This doesn't make sense to me. Typically, we see something like:
>
> Should be one of:
> "vendor,soc1-device"
> "vendor,soc2-device"
> Followed by "vendor,soc0-device"
>
> Sometime the last entry is a generic string. Here soc0 is the first SOC with the
> block. Later SOCs have "the same" block, but new compatible strings in addition
> in case any changes or errata are found that the driver needs to deal with.
>

Hi Rob,

Thanks for your suggestion,
So how about like this:
--- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
@@ -2,7 +2,10 @@

Required properties:
- compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
- "fsl,imx7d-qspi", "fsl,imx6ul-qspi"
+ "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
+ "fsl,ls1021a-qspi",
+ Or
+ "fsl,ls2080a-qspi" followed by "fsl,ls1021a-qspi",

But if we add addition information in binging documents, once any changes or errata are found that the driver needs to deal (such as "vendor,soc1-device"), the binging document should also be update.
Because at that time the driver should also match "vendor,soc1-device"
So at that time we can't say "vendor,soc1-device"should followed by "vendor,soc0-device"

It seems the only benefit that may keep the dts no changes.

Thanks.
Yao
\
 
 \ /
  Last update: 2016-01-18 08:01    [W:0.077 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site