lkml.org 
[lkml]   [2016]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 6/6] Documentation: livepatch: outline the Elf format of a livepatch module
Hi Jessica,

first, thanks a lot for writing a documentation. It is really
appreciated!

To be honest, I am not sure if it makes sense to give feedback
at this stage. It seems that there still will be some changes
in the elf format.

On Fri 2016-01-08 14:28:24, Jessica Yu wrote:
> Document the special Elf sections and constants livepatch modules use.
>
> Signed-off-by: Jessica Yu <jeyu@redhat.com>
> ---
> Documentation/livepatch/patch-module-format.txt | 106 ++++++++++++++++++++++++
> 1 file changed, 106 insertions(+)
> create mode 100644 Documentation/livepatch/patch-module-format.txt

I would call this symbol-relocation.txt or so. It describes only this
part of the patch format.

>
> diff --git a/Documentation/livepatch/patch-module-format.txt b/Documentation/livepatch/patch-module-format.txt
> new file mode 100644
> index 0000000..d825629
> --- /dev/null
> +++ b/Documentation/livepatch/patch-module-format.txt
> @@ -0,0 +1,106 @@
> +---------------------------
> +Livepatch module Elf format
> +---------------------------

I would start with a description what symbols are relocated and why
it needs to be done a special way.

Also I would switch a bit the order of the sections below.
We have relocation sections for each patched object. They are
used when the object is loaded and patched. Each section has
relocation information for symbols that are accessed from
new versions of functions for the patched object.
Hmm, we should add some generic documentation about
LivePatching that would describe the design and used terms.


> +This document outlines the special Elf constants and sections livepatch
> +uses to patch both modules and the kernel (vmlinux).

> +--------------------------
> +1. Livepatch modinfo field
> +--------------------------
> +

Please, express that livepatch must set the "livepatch" field to be
indentified and loaded correctly.

> +Livepatch modules can be identified by users by using the 'modinfo' command
> +and looking for the presence of the "livepatch" field. This field is also
> +used by the kernel module loader to identify livepatch modules.
> +
> +Example modinfo output:
> +
> +% modinfo kpatch-meminfo.ko

s/kpatch/livepatch/ ;-)

> +filename: kpatch-meminfo.ko

same here ;-)

> +livepatch: Y
> +license: GPL
> +depends:
> +vermagic: 4.3.0+ SMP mod_unload
> +
> +--------------------
> +2. Livepatch symbols
> +--------------------

I would be more precise here. These are symbols that will get
relocated by the livepatch framework.

> +
> +These are symbols marked with SHN_LIVEPATCH and their names are prefixed
> +with the string ".klp.sym.${objname}.", where ${objname} is the

We should describe the entire format. I mean
.klp.sym.${objname}.[symname]. Also we should explain why symname is optional.

> name of the
> +"object" where symbol stems from (the name of a module, for example).
> +A symbol's position (used to differentiate duplicate symbols within the
> +same object) in its object is encoded in the Elf_Sym st_other field
> +and accessed with the KLP_SYMPOS macro (see include/linux/livepatch.h)
> +
> +Livepatch symbols are manually resolved by livepatch, and are used in cases

Please, what do you mean by "manually" resolved?

> +where we cannot immediately know the address of a symbol because the
> +to-be-patched module is not loaded yet. Livepatch modules keep these
> +symbols in their symbol tables, and the symbol table is made accessible
> +through module->core_symtab. For livepatch modules, core_symtab will
> +contain an exact copy of the original symbol table as opposed to a stripped
> +down version containing just the "core" symbols.
> +
> +-----------------------------------
> +3. ".klp.rel." relocation sections
> +-----------------------------------
> +
> +A livepatch module uses special Elf relocation sections to apply
> +relocations both for regular vmlinux patches as well as those that should
> +be applied as soon as the to-be-patched module is loaded. For example, if a
> +patch module patches a driver that is not currently loaded, livepatch will
> +apply its corresponding klp relocation section(s) to the driver once it
> +loads.
> +
> +The names of these livepatch relocation sections are formatted
> +".klp.rel.${objname}.", where ${objname} is the name of the
> "object" being

It seems that the full format is ".klp.rel.[objname].section_name"
and section_name is not explained here.


> +patched (e.g. vmlinux or name of module). Each object within a patch module
> +may have multiple klp sections (e.g. patches to multiple functions within
> +the same object). There is a 1-1 correspondence between a klp relocation
> +section and the target section (usually the text section for a function) to
> +which the relocation(s) apply.
> +
> +Here's a sample readelf output for a livepatch module that patches vmlinux and
> +modules 9p, btrfs, ext4:
> + ...
> + [29] .klp.rel.9p.text.caches.show RELA 0000000000000000 002d58 0000c0 18 AIo 64 9 8
> + [30] .klp.rel.btrfs.text.btrfs.feature.attr.show RELA 0000000000000000 002e18 000060 18 AIo 64 11 8
> + ...
> + [34] .klp.rel.ext4.text.ext4.attr.store RELA 0000000000000000 002fd8 0000d8 18 AIo 64 13 8
> + [35] .klp.rel.ext4.text.ext4.attr.show RELA 0000000000000000 0030b0 000150 18 AIo 64 15 8
> + [36] .klp.rel.vmlinux.text.cmdline.proc.show RELA 0000000000000000 003200 000018 18 AIo 64 17 8
> + [37] .klp.rel.vmlinux.text.meminfo.proc.show RELA 0000000000000000 003218 0000f0 18 AIo 64 19 8
> + ...
> +
> +klp relocation sections are SHT_RELA sections but with a few special
> +characteristics. Notice that they are marked SHF_ALLOC ("A") so that they
> +will not be discarded when the module is loaded into memory, as well as
> +with the SHF_RELA_LIVEPATCH flag ("o" - for OS-specific) so the module

Hmm, it is SHF_RELA... I wonder if we want to rather use
.klp.rela. prefix to be consistent.

> +loader can identify them and avoid treating them as regular SHT_RELA
> +sections, since they are manually managed by livepatch.
> +
> +Since Elf information is preserved for livepatch modules (see Section 4), a
> +klp relocation section can be applied simply by passing in the appropriate
> +section index to apply_relocate_add() (in the module loader code), which
> +then uses it to access the relocation section and apply the relocations.
> +
> +--------------------------------------------------------
> +4. How a livepatch module accesses its symbol table and
> +its klp relocation sections
> +--------------------------------------------------------
> +
> +The kernel module loader checks whether the module being loaded is a
> +livepatch module. If so, it then makes a copy of the module's Elf header,
> +section headers, section name string table, and some noteworthy section
> +indices (for example, the symtab's section index). It adjusts the symtab's
> +sh_addr to point to mod->core_symtab, since the original mod->symtab lies
> +in init memory and gets freed once the module finishes initializing. For
> +livepatch modules, the core_symtab will be an exact copy of its original
> +symbol table (where normally, only "core" symbols are included in this
> +symbol table. See is_core_symbol() in kernel/module.c). Livepatch requires
> +that the symbols retain their original indices in the symbol table so that
> +the klp relocation sections can be applied correctly.

We should add some notice also to the source code or commit message
aboud why we preserve all the symbols for live patch.

Great work.

Thanks,
Petr

\
 
 \ /
  Last update: 2016-01-12 13:41    [W:0.115 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site