Messages in this thread Patch in this message | | | From | Konstantin Shkolnyy <> | Subject | [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions. | Date | Fri, 1 Jan 2016 21:12:20 -0600 |
| |
Change to use new 8-bit and 32-bit register access functions instead of cp210x_get_config and cp210x_set_config.
Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> --- change in v3: Presented new function addition as a separate patch #1, to simplify code review.
drivers/usb/serial/cp210x.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 7a91c6c..1339d77 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -787,10 +787,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, { struct device *dev = &port->dev; unsigned int cflag, modem_ctl[4]; - unsigned int baud; + u32 baud; u16 bits; - cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); + cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud); dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); *baudp = baud; @@ -937,8 +937,7 @@ static void cp210x_change_speed(struct tty_struct *tty, baud = cp210x_quantise_baudrate(baud); dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud); - if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, - sizeof(baud))) { + if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) { dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); if (old_termios) baud = old_termios->c_ospeed; @@ -1109,10 +1108,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on) static int cp210x_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - unsigned int control; + u8 control; int result; - cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) -- 1.8.4.5
| |