Messages in this thread | | | Date | Mon, 7 Sep 2015 14:19:11 +0530 | From | maitysanchayan@gmail ... | Subject | Re: [PATCH] ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel |
| |
Hi Shawn,
On 15-09-06 12:32:32, Shawn Guo wrote: > On Thu, Aug 06, 2015 at 09:28:22PM +0530, Sanchayan Maity wrote: > > Add iio_hwmon node to expose the temperature channel on Vybrid > > as hardware monitor device using the iio_hwmon driver. > > > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> > > --- > > arch/arm/boot/dts/vfxxx.dtsi | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi > > index 39173bb..0993d66 100644 > > --- a/arch/arm/boot/dts/vfxxx.dtsi > > +++ b/arch/arm/boot/dts/vfxxx.dtsi > > @@ -597,5 +597,10 @@ > > status = "disabled"; > > }; > > }; > > + > > + iio_hwmon { > > Hyphen rather than underscore should be used in node name.
As per iio-bindings.txt I did this. It is the same in imx23.dtsi and imx28.dtsi.
http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/iio/iio-bindings.txt#L85 http://lxr.free-electrons.com/source/arch/arm/boot/dts/imx23.dtsi#L570 http://lxr.free-electrons.com/source/arch/arm/boot/dts/imx28.dtsi#L1246
So should this be changed?
Thanks.
- Sanchayan.
> > Shawn > > > + compatible = "iio-hwmon"; > > + io-channels = <&adc0 16>; > > + }; > > }; > > }; > > -- > > 2.5.0 > >
| |