lkml.org 
[lkml]   [2015]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: phy: qcom: Switch to new extcon framework API
Date
[un]register_interest and reading cable state by
name have been deprecated. Switch to new API.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
---
drivers/usb/phy/phy-qcom-8x16-usb.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index 5d357a94599e..579587d97217 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -71,7 +71,7 @@ struct phy_8x16 {

struct reset_control *phy_reset;

- struct extcon_specific_cable_nb vbus_cable;
+ struct extcon_dev *vbus_edev;
struct notifier_block vbus_notify;

struct gpio_desc *switch_gpio;
@@ -234,7 +234,7 @@ static int phy_8x16_init(struct usb_phy *phy)
val = ULPI_PWR_OTG_COMP_DISABLE;
usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));

- state = extcon_get_cable_state(qphy->vbus_cable.edev, "USB");
+ state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB);
if (state)
phy_8x16_vbus_on(qphy);
else
@@ -314,7 +314,6 @@ static int phy_8x16_reboot_notify(struct notifier_block *this,

static int phy_8x16_probe(struct platform_device *pdev)
{
- struct extcon_dev *edev;
struct phy_8x16 *qphy;
struct resource *res;
struct usb_phy *phy;
@@ -349,9 +348,9 @@ static int phy_8x16_probe(struct platform_device *pdev)
if (ret < 0)
return ret;

- edev = extcon_get_edev_by_phandle(phy->dev, 0);
- if (IS_ERR(edev))
- return PTR_ERR(edev);
+ qphy->vbus_edev = extcon_get_edev_by_phandle(phy->dev, 0);
+ if (IS_ERR(qphy->vbus_edev))
+ return PTR_ERR(qphy->vbus_edev);

ret = clk_set_rate(qphy->core_clk, INT_MAX);
if (ret < 0)
@@ -370,8 +369,8 @@ static int phy_8x16_probe(struct platform_device *pdev)
goto off_clks;

qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
- ret = extcon_register_interest(&qphy->vbus_cable, edev->name,
- "USB", &qphy->vbus_notify);
+ ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB,
+ &qphy->vbus_notify);
if (ret < 0)
goto off_power;

@@ -385,7 +384,8 @@ static int phy_8x16_probe(struct platform_device *pdev)
return 0;

off_extcon:
- extcon_unregister_interest(&qphy->vbus_cable);
+ extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
+ &qphy->vbus_notify);
off_power:
phy_8x16_regulators_disable(qphy);
off_clks:
@@ -400,7 +400,8 @@ static int phy_8x16_remove(struct platform_device *pdev)
struct phy_8x16 *qphy = platform_get_drvdata(pdev);

unregister_reboot_notifier(&qphy->reboot_notify);
- extcon_unregister_interest(&qphy->vbus_cable);
+ extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
+ &qphy->vbus_notify);

/*
* Ensure that D+/D- lines are routed to uB connector, so
--
1.9.1


\
 
 \ /
  Last update: 2015-09-07 13:41    [W:0.029 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site