lkml.org 
[lkml]   [2015]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next 0/7] net: dsa: mv88e6xxx: improve ATU move operations
Date
Hi!

This patchset completes the set of available Address Translation Unit
operations.

These Marvell switches have 4 operations to flush or (re)move, all or
only non-static MAC addresses, from the entire set of databases or from
just a particular one.

The first 3 patches introduce a generic _mv88e6xxx_atu_flush_move
function. The 4 remaining patches update a few FID operations in the
driver on setup, when a port join or leave a VLAN, or change state.

This is a step forward improving the hardware bridging support in DSA
and 88E6352-compatible switches.

Cheers,
-v

Vivien Didelot (7):
net: dsa: mv88e6xxx: extract FID write from ATU command
net: dsa: mv88e6xxx: extract ATU data write access
net: dsa: mv88e6xxx: rework ATU Flush operation
net: dsa: mv88e6xxx: flush ATU on initial setup
net: dsa: mv88e6xxx: flush all addresses when adding a VLAN
net: dsa: mv88e6xxx: remove addresses when a port leaves a VLAN
net: dsa: mv88e6xxx: remove all MACs when disabling a port

drivers/net/dsa/mv88e6xxx.c | 153 ++++++++++++++++++++++++++++++++++----------
drivers/net/dsa/mv88e6xxx.h | 8 +--
2 files changed, 123 insertions(+), 38 deletions(-)

--
2.5.1



\
 
 \ /
  Last update: 2015-09-04 21:01    [W:0.075 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site