lkml.org 
[lkml]   [2015]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] mmc: sdhci-pxav3: Enable pxa1928 device support
Date
SDHCI controller present in PXA1928 has few differences as far as
register map is concerned.
For example,

PXAxxx PXA1928
====== =======
SDCLK_DELAY field 0x10A 0x114
SDCLK_DELAY mask 0x1F 0x3FF
SDCLK_DELAY shift 9 8
SDCLK_SEL shift 8 2 (SEL1)

So in order to support multi-platform, use sdhci_pxa_regdata structure
as a variant data according to platform.

Note that, there are some more differences, which would be added
as and when respective feature gets added to the driver.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
drivers/mmc/host/sdhci-pxav3.c | 62 ++++++++++++++++++++++++++++++++++--------
1 file changed, 51 insertions(+), 11 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 6d4bad4..aecae04 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -42,9 +42,6 @@
#define PXAV3_RPM_DELAY_MS 50

#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
-#define SDCLK_SEL 0x100
-#define SDCLK_DELAY_SHIFT 9
-#define SDCLK_DELAY_MASK 0x1f

#define SD_CFG_FIFO_PARAM 0x100
#define SDCFG_GEN_PAD_CLK_ON BIT(6)
@@ -58,11 +55,25 @@
#define SDCE_MISC_INT BIT(2)
#define SDCE_MISC_INT_EN BIT(1)

+#define SD_RX_CFG_REG 0x114
+
/* IO Power control */
#define IO_PWR_AKEY_ASFAR 0xbaba
#define IO_PWR_AKEY_ASSAR 0xeb10
#define IO_PWR_MMC1_PAD_1V8 BIT(2)

+struct sdhci_pxa_data {
+ u32 sdclk_delay_reg;
+ u32 sdclk_delay_mask;
+ u8 sdclk_delay_shift;
+ u8 sdclk_sel_mask;
+ u8 sdclk_sel_shift;
+ /*
+ * We have few more differences, add them along with their
+ * respective feature support
+ */
+};
+
struct sdhci_pxa {
struct clk *clk_core;
struct clk *clk_io;
@@ -70,6 +81,24 @@ struct sdhci_pxa {
void __iomem *sdio3_conf_reg;
void __iomem *io_pwr_reg;
void __iomem *io_pwr_lock_reg;
+ struct sdhci_pxa_data *data;
+};
+
+static struct sdhci_pxa_data pxav3_data_v1 = {
+ .sdclk_delay_reg = SD_CLOCK_BURST_SIZE_SETUP,
+ .sdclk_delay_mask = 0x1F,
+ .sdclk_delay_shift = 9,
+ .sdclk_sel_mask = 0x1,
+ .sdclk_sel_shift = 8,
+};
+
+static struct sdhci_pxa_data pxav3_data_v2 = {
+ .sdclk_delay_reg = SD_RX_CFG_REG,
+ .sdclk_delay_mask = 0x3FF,
+ .sdclk_delay_shift = 8,
+ /* Only set SDCLK_SEL1, as driver uses default value of SDCLK_SEL0 */
+ .sdclk_sel_mask = 0x3,
+ .sdclk_sel_shift = 2, /* SDCLK_SEL1 */
};

/*
@@ -183,6 +212,8 @@ static void pxav3_reset(struct sdhci_host *host, u8 mask)
{
struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;

sdhci_reset(host, mask);

@@ -193,12 +224,14 @@ static void pxav3_reset(struct sdhci_host *host, u8 mask)
*/
if (pdata && 0 != pdata->clk_delay_cycles) {
u16 tmp;
-
- tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
- tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
- << SDCLK_DELAY_SHIFT;
- tmp |= SDCLK_SEL;
- writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
+ struct sdhci_pxa_data *data = pxa->data;
+
+ tmp = readw(host->ioaddr + data->sdclk_delay_reg);
+ tmp |= (pdata->clk_delay_cycles & data->sdclk_delay_mask)
+ << data->sdclk_delay_shift;
+ tmp &= ~(data->sdclk_sel_mask << data->sdclk_sel_shift);
+ tmp |= 1 << data->sdclk_sel_shift;
+ writew(tmp, host->ioaddr + data->sdclk_delay_reg);
}
}
}
@@ -363,10 +396,16 @@ static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
#ifdef CONFIG_OF
static const struct of_device_id sdhci_pxav3_of_match[] = {
{
- .compatible = "mrvl,pxav3-mmc",
+ .compatible = "mrvl,pxav3-mmc",
+ .data = (void *)&pxav3_data_v1,
+ },
+ {
+ .compatible = "marvell,armada-380-sdhci",
+ .data = (void *)&pxav3_data_v1,
},
{
- .compatible = "marvell,armada-380-sdhci",
+ .compatible = "marvell,pxav3-1928-sdhci",
+ .data = (void *)&pxav3_data_v2,
},
{},
};
@@ -470,6 +509,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
goto err_of_parse;
sdhci_get_of_property(pdev);
pdata = pxav3_get_mmc_pdata(dev);
+ pxa->data = (struct sdhci_pxa_data *)match->data;
pdev->dev.platform_data = pdata;
} else if (pdata) {
/* on-chip device */
--
1.9.1


\
 
 \ /
  Last update: 2015-09-04 18:01    [W:1.398 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site