lkml.org 
[lkml]   [2015]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] net: tipc: fix stall during bclink wakeup procedure
Date
Reviewed again, and finally understood. 
You are right; I just didn't understand the problem description correctly.

Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>

///jon

> -----Original Message-----
> From: netdev-owner@vger.kernel.org [mailto:netdev-
> owner@vger.kernel.org] On Behalf Of Jon Maloy
> Sent: Thursday, 03 September, 2015 12:07
> To: Kolmakov Dmitriy; davem@davemloft.net
> Cc: Ying Xue; tipc-discussion@lists.sourceforge.net; netdev@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: RE: [PATCH] net: tipc: fix stall during bclink wakeup procedure
>
>
>
> > -----Original Message-----
> > From: Kolmakov Dmitriy [mailto:kolmakov.dmitriy@huawei.com]
> > Sent: Thursday, 03 September, 2015 10:39
> > To: davem@davemloft.net
> > Cc: Jon Maloy; Ying Xue; tipc-discussion@lists.sourceforge.net;
> > netdev@vger.kernel.org; linux-kernel@vger.kernel.org
> > Subject: [PATCH] net: tipc: fix stall during bclink wakeup procedure
> >
> > From: Dmitry S Kolmakov <kolmakov.dmitriy@huawei.com>
> >
> > If an attempt to wake up users of broadcast link is made when there is
> > no enough place in send queue than it may hang up inside the
> > tipc_sk_rcv() function since the loop breaks only after the wake up
> > queue becomes empty. This can lead to complete CPU stall with the
> > following message generated by RCU:
> >
> > INFO: rcu_sched self-detected stall on CPU { 0} (t=2101 jiffies
> > g=54225
> > c=54224 q=11465) Task dump for CPU 0:
> > tpch R running task 0 39949 39948 0x0000000a
> > ffffffff818536c0 ffff88181fa037a0 ffffffff8106a4be 0000000000000000
> > ffffffff818536c0 ffff88181fa037c0 ffffffff8106d8a8 ffff88181fa03800
> > 0000000000000001 ffff88181fa037f0 ffffffff81094a50 ffff88181fa15680
> > Call
> > Trace:
> > <IRQ> [<ffffffff8106a4be>] sched_show_task+0xae/0x120
> > [<ffffffff8106d8a8>] dump_cpu_task+0x38/0x40 [<ffffffff81094a50>]
> > rcu_dump_cpu_stacks+0x90/0xd0 [<ffffffff81097c3b>]
> > rcu_check_callbacks+0x3eb/0x6e0 [<ffffffff8106e53f>] ?
> > account_system_time+0x7f/0x170 [<ffffffff81099e64>]
> > update_process_times+0x34/0x60 [<ffffffff810a84d1>]
> > tick_sched_handle.isra.18+0x31/0x40
> > [<ffffffff810a851c>] tick_sched_timer+0x3c/0x70 [<ffffffff8109a43d>]
> > __run_hrtimer.isra.34+0x3d/0xc0 [<ffffffff8109aa95>]
> > hrtimer_interrupt+0xc5/0x1e0 [<ffffffff81030d52>] ?
> > native_smp_send_reschedule+0x42/0x60
> > [<ffffffff81032f04>] local_apic_timer_interrupt+0x34/0x60
> > [<ffffffff810335bc>] smp_apic_timer_interrupt+0x3c/0x60
> > [<ffffffff8165a3fb>] apic_timer_interrupt+0x6b/0x70 [<ffffffff81659129>]
> ?
> > _raw_spin_unlock_irqrestore+0x9/0x10
> > [<ffffffff8107eb9f>] __wake_up_sync_key+0x4f/0x60
> > [<ffffffffa313ddd1>]
> > tipc_write_space+0x31/0x40 [tipc] [<ffffffffa313dadf>]
> > filter_rcv+0x31f/0x520 [tipc] [<ffffffffa313d699>] ?
> > tipc_sk_lookup+0xc9/0x110 [tipc] [<ffffffff81659259>] ?
> > _raw_spin_lock_bh+0x19/0x30 [<ffffffffa314122c>]
> > tipc_sk_rcv+0x2dc/0x3e0 [tipc] [<ffffffffa312e7ff>]
> > tipc_bclink_wakeup_users+0x2f/0x40 [tipc] [<ffffffffa313ce26>]
> > tipc_node_unlock+0x186/0x190 [tipc] [<ffffffff81597c1c>] ?
> > kfree_skb+0x2c/0x40 [<ffffffffa313475c>] tipc_rcv+0x2ac/0x8c0 [tipc]
> > [<ffffffffa312ff58>] tipc_l2_rcv_msg+0x38/0x50 [tipc]
> > [<ffffffff815a76d3>]
> > __netif_receive_skb_core+0x5a3/0x950
> > [<ffffffff815a98d3>] __netif_receive_skb+0x13/0x60
> > [<ffffffff815a993e>]
> > netif_receive_skb_internal+0x1e/0x90
> > [<ffffffff815aa138>] napi_gro_receive+0x78/0xa0 [<ffffffffa07f93f4>]
> > tg3_poll_work+0xc54/0xf40 [tg3] [<ffffffff81597c8c>] ?
> > consume_skb+0x2c/0x40 [<ffffffffa07f9721>] tg3_poll_msix+0x41/0x160
> > [tg3] [<ffffffff815ab0f2>] net_rx_action+0xe2/0x290
> > [<ffffffff8104b92a>]
> > __do_softirq+0xda/0x1f0 [<ffffffff8104bc26>] irq_exit+0x76/0xa0
> > [<ffffffff81004355>] do_IRQ+0x55/0xf0 [<ffffffff8165a12b>]
> > common_interrupt+0x6b/0x6b <EOI>
> >
> > The issue occurs only when tipc_sk_rcv() is used to wake up postponed
> > senders:
> >
> > tipc_bclink_wakeup_users()
> > // wakeupq - is a queue which consists of special
> > // messages with SOCK_WAKEUP type.
> > tipc_sk_rcv(wakeupq)
> > ...
> > while (skb_queue_len(inputq)) {
> > filter_rcv(skb)
> > // Here the type of message is
> > checked
> > // and if it is SOCK_WAKEUP than
> > // it tries to wake up a sender.
> > tipc_write_space(sk)
> >
> > wake_up_interruptible_sync_poll()
> > }
> >
> > After the sender thread is woke up it can gather control and perform
> > an attempt to send a message. But if there is no enough place in send
> > queue it will call link_schedule_user() function which puts a message
> > of type SOCK_WAKEUP to the wakeup queue and put the sender to sleep.
> > Thus the size of the queue actually is not changed and the while() loop
> never exits.
> >
> > The approach I proposed is to wake up only senders for which there is
> > enough place in send queue so the described issue can't occur.
> > Moreover the same approach is already used to wake up senders on
> unicast links.
>
> I looked closer at the code, and I don't see how you can enter into this loop.
> SOCK_WAKEP is only issued if buffers actually have been released from the
> transmit queue, so sooner or later there should be space in the queue for
> any sender. I am starting to suspect that the root of this problem is
> elsewhere.
>
> Maybe we should continue this thread at tipc-dicussion, so we don't pollute
> the netdev list with our internal discussions?
>
> ///jon
>
> >
> > I have got into the issue on our product code but to reproduce the
> > issue I changed a benchmark test application (from
> > tipcutils/demos/benchmark) to perform the following scenario:
> > 1. Run 64 instances of test application (nodes). It can be done on
> > the one physical machine.
> > 2. Each application connects to all other using TIPC sockets in RDM
> > mode.
> > 3. When setup is done all nodes start simultaneously send broadcast
> > messages.
> > 4. Everything hangs up.
> >
> > The issue is reproducible only when a congestion on broadcast link occurs.
> > For example, when there are only 8 nodes it works fine since
> > congestion doesn't occur. Send queue limit is 40 in my case (I use a
> > critical importance
> > level) and when 64 nodes send a message at the same moment a
> > congestion occurs every time.
> >
> > Signed-off-by: Dmitry S Kolmakov <kolmakov.dmitriy@huawei.com>
> > ---
> > diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c index
> > c5cbdcb..997dd60 100644
> > --- a/net/tipc/bcast.c
> > +++ b/net/tipc/bcast.c
> > @@ -169,6 +169,30 @@ static void bclink_retransmit_pkt(struct tipc_net
> > *tn,
> > u32 after, u32 to) }
> >
> > /**
> > + * bclink_prepare_wakeup - prepare users for wakeup after congestion
> > + * @bcl: broadcast link
> > + * @resultq: queue for users which can be woken up
> > + * Move a number of waiting users, as permitted by available space in
> > + * the send queue, from link wait queue to specified queue for wakeup
> > +*/ static void bclink_prepare_wakeup(struct tipc_link *bcl, struct
> > +sk_buff_head *resultq) {
> > + int pnd[TIPC_SYSTEM_IMPORTANCE + 1] = {0,};
> > + int imp, lim;
> > + struct sk_buff *skb, *tmp;
> > +
> > + skb_queue_walk_safe(&bcl->wakeupq, skb, tmp) {
> > + imp = TIPC_SKB_CB(skb)->chain_imp;
> > + lim = bcl->window + bcl->backlog[imp].limit;
> > + pnd[imp] += TIPC_SKB_CB(skb)->chain_sz;
> > + if ((pnd[imp] + bcl->backlog[imp].len) >= lim)
> > + continue;
> > + skb_unlink(skb, &bcl->wakeupq);
> > + skb_queue_tail(resultq, skb);
> > + }
> > +}
> > +
> > +/**
> > * tipc_bclink_wakeup_users - wake up pending users
> > *
> > * Called with no locks taken
> > @@ -176,8 +200,12 @@ static void bclink_retransmit_pkt(struct tipc_net
> > *tn,
> > u32 after, u32 to) void tipc_bclink_wakeup_users(struct net *net) {
> > struct tipc_net *tn = net_generic(net, tipc_net_id);
> > + struct tipc_link *bcl = tn->bcl;
> > + struct sk_buff_head resultq;
> >
> > - tipc_sk_rcv(net, &tn->bclink->link.wakeupq);
> > + skb_queue_head_init(&resultq);
> > + bclink_prepare_wakeup(bcl, &resultq);
> > + tipc_sk_rcv(net, &resultq);
> > }
> >
> > /**
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in the body
> of a message to majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-09-04 15:21    [W:0.082 / U:6.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site