lkml.org 
[lkml]   [2015]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range
From
Date
On 30.09.2015 17:20, Yakir Yang wrote:
> Hi Krzysztof,
>
> On 09/30/2015 03:34 PM, Krzysztof Kozlowski wrote:
>> On 30.09.2015 16:19, Yakir Yang wrote:
>>> Hi Krzysztof,
>>>
>>> On 09/30/2015 01:32 PM, Krzysztof Kozlowski wrote:
>>>> On 22.09.2015 16:37, Yakir Yang wrote:
>>>>> Both hsync/vsync polarity and interlace mode can be parsed from
>>>>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>>>>> by the video code.
>>>>>
>>>>> But presumably Exynos still relies on the DT properties, so take
>>>>> good use of mode_fixup() in to achieve the compatibility hacks.
>>>>>
>>>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>>>>> ---
>>>>> Changes in v5:
>>>>> - Switch video timing type to "u32", so driver could use "of_property_read_u32"
>>>>> to get the backword timing values.
>>>> Okay
>>>>
>>>>> Krzysztof suggest me that driver could use
>>>>> the "of_property_read_bool" to get backword timing values, but that interfacs
>>>>> would modify the original drm_display_mode timing directly (whether those
>>>>> properties exists or not).
>>>> Hmm, I don't understand. You have a:
>>>> struct video_info {
>>>> bool h_sync_polarity;
>>>> bool v_sync_polarity;
>>>> bool interlaced;
>>>> };
>>>>
>>>> so what is wrong with:
>>>> dp_video_config->h_sync_polarity =
>>>> of_property_read_bool(dp_node, "hsync-active-high");
>>>>
>>>> Is it exactly the same binding as previously?
>>> Yes, it is the same binding as previously. But just a note that we already
>>> mark those DT binding as deprecated.
>>>
>>> +-interlaced: deprecated prop that can parsed frm drm_display_mode.
>>> +-vsync-active-high: deprecated prop that can parsed frm drm_display_mode.
>>> +-hsync-active-high: deprecated prop that can parsed frm drm_display_mode.
>>>
>>>
>>> For now those values should come from "struct drm_display_mode",
>>> and we already parsed them out from "drm_display_mode" before
>>> driver provide the backward compatibility.
>>>
>>> Let's used the "hsync-active-high" example:
>>> As for now the code would like:
>>> static void analogix_dp_bridge_mode_set(...)
>>> {
>>> // Parsed timing value from "drm_display_mode"
>>> video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
>>>
>>> // Try to detect the deprecated property, providing
>>> // the backward compatibility
>>> of_property_read_u32(dp_node, "hsync-active-high",
>>> &video->h_sync_polarity);
>>>
>>> /*
>>> * In this case, if "hsync-active-high" property haven't been
>>> * found, then the video timing "h_sync_polarity" would keep
>>> * no change, keeping the parsed value from "drm_display_mode"
>>> */
>>> }
>>>
>>> But if keep the "of_property_read_bool", then code would like:
>>> static void analogix_dp_bridge_mode_set(...)
>>> {
>>> // Parsed timing value from "drm_display_mode"
>>> video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
>>>
>>> // Try to detect the deprecated property, providing
>>> // the backward compatibility
>>> video->h_sync_polarity =
>>> of_property_read_bool(dp_node, "hsync-active-high");
>>>
>>>
>>> /*
>>> * In this case, if "hsync-active-high" property haven't been
>>> * found, then the video timing "h_sync_polarity" would just
>>> * modify to "false". That is the place we don't want, cause
>>> * it would always modify the timing value parsed from
>>> * "drm_display_mode"
>>> */
>>> }
>>>
>> OK, I see the point of overwriting values from drm_display_mode. However
>> I think you changed the binding. I believe the of_property_read_u32()
>> will behave differently for such DTS:
>>
>> exynos_dp {
>> ...
>> hsync-active-high;
>> }
>>
>> It will return -EOVERFLOW which means it would be broken now...
>
> Whoops, thanks for your remind, after try that, I do see over flow error.
> static void *of_find_property_value_of_size(const struct device_node *np,
> const char *propname, u32 len)
> {
> ....
> if (len > prop->length)
> return ERR_PTR(-EOVERFLOW);
> ...
> }
>
> So I though code should be:
> if (of_property_read_bool(dp_node, "hsync-active-high"))
> video->h_sync_polarity = true;

Looks good.

>
> And we can't provide full backward compatibility for this property, cause
> the previous exynos_dp driver would set this timing value to "false" when
> property not defined, but analogix_dp driver keep this timing value
> corresponding to "drm_display_mode" when property not found.

Indeed, the behaviour changes. I don't know if this is important issue...

Best regards,
Krzysztof



\
 
 \ /
  Last update: 2015-09-30 11:01    [W:0.208 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site