lkml.org 
[lkml]   [2015]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] GPIO: Add GPIO support for the ACCES 104-IDIO-16
The ACCES 104-IDIO-16 family of PC/104 utility boards feature 16
optically isolated inputs and 16 optically isolated FET solid state
outputs. This driver provides GPIO support for these 32 channels of
digital I/O. Change-of-State detection interrupts are not supported.

GPIO 0-15 correspond to digital outputs 0-15, while GPIO 16-31
correspond to digital inputs 0-15.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/Kconfig | 14 ++++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-104-idio-16.c | 154 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/gpio/gpio-104-idio-16.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8949b3f..6309071 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -684,6 +684,20 @@ config GPIO_SX150X

endmenu

+menu "ISA GPIO expanders"
+
+menuconfig GPIO_104_IDIO_16
+ tristate "ACCES 104-IDIO-16 GPIO support"
+ help
+ Enables GPIO support for the ACCES 104-IDIO-16 family.
+
+config 104_IDIO_16_BASE
+ hex "ACCES 104-IDIO-16 base address"
+ depends on GPIO_104_IDIO_16
+ default 0x000
+
+endmenu
+
menu "MFD GPIO expanders"

config GPIO_ADP5520
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f79a7c4..6f2fea5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
# Device drivers. Generally keep list sorted alphabetically
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o

+obj-$(CONFIG_GPIO_104_IDIO_16) += gpio-104-idio-16.o
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c
new file mode 100644
index 0000000..5e3e89d
--- /dev/null
+++ b/drivers/gpio/gpio-104-idio-16.c
@@ -0,0 +1,154 @@
+/*
+ * GPIO driver for the ACCES 104-IDIO-16 family
+ * Copyright (C) 2015 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/spinlock.h>
+
+struct a_104_idio_16_gpio {
+ struct gpio_chip chip;
+ spinlock_t lock;
+ unsigned base;
+ unsigned data;
+};
+
+#define to_a104i16gp(chip) container_of(chip, struct a_104_idio_16_gpio, chip)
+
+static void __exit a_104_idio_16_exit(void);
+static int a_104_idio_16_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset);
+static int a_104_idio_16_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value);
+static int a_104_idio_16_gpio_get(struct gpio_chip *chip, unsigned offset);
+static void a_104_idio_16_gpio_set(struct gpio_chip *chip, unsigned offset,
+ int value);
+static int __init a_104_idio_16_init(void);
+
+static const unsigned A_104_IDIO_16_EXTENT = 8;
+
+static struct a_104_idio_16_gpio gp = {
+ .chip = {
+ .label = "104-IDIO-16 GPIO",
+ .owner = THIS_MODULE,
+ .base = -1,
+ .ngpio = 32,
+ .direction_input = a_104_idio_16_gpio_direction_input,
+ .direction_output = a_104_idio_16_gpio_direction_output,
+ .get = a_104_idio_16_gpio_get,
+ .set = a_104_idio_16_gpio_set
+ },
+ .base = CONFIG_104_IDIO_16_BASE
+};
+
+static void __exit a_104_idio_16_exit(void)
+{
+ pr_info("104-idio-16: Exiting 104-idio-16 module\n");
+
+ gpiochip_remove(&gp.chip);
+ release_region(CONFIG_104_IDIO_16_BASE, A_104_IDIO_16_EXTENT);
+}
+
+static int a_104_idio_16_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return 0;
+}
+
+static int a_104_idio_16_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ chip->set(chip, offset, value);
+ return 0;
+}
+
+static int a_104_idio_16_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct a_104_idio_16_gpio *a104i16gp = to_a104i16gp(chip);
+ const unsigned BIT_MASK = 1U << (offset-16);
+
+ if (offset < 16)
+ return 0;
+
+ if (offset < 24)
+ return !!(inb(a104i16gp->base + 1) & BIT_MASK);
+
+ return !!(inb(a104i16gp->base + 5) & (BIT_MASK>>8));
+}
+
+static void a_104_idio_16_gpio_set(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct a_104_idio_16_gpio *a104i16gp = to_a104i16gp(chip);
+ const unsigned BIT_MASK = 1U << offset;
+ unsigned long flags;
+
+ if (offset > 15)
+ return;
+
+ spin_lock_irqsave(&a104i16gp->lock, flags);
+
+ if (value)
+ a104i16gp->data |= BIT_MASK;
+ else
+ a104i16gp->data &= ~BIT_MASK;
+
+ if (offset > 7)
+ outb(~a104i16gp->data >> 8, a104i16gp->base + 4);
+ else
+ outb(~a104i16gp->data, a104i16gp->base);
+
+ spin_unlock_irqrestore(&a104i16gp->lock, flags);
+}
+
+static int __init a_104_idio_16_init(void)
+{
+ int err = 0;
+
+ pr_info("104-idio-16: Initializing 104-idio-16 module\n");
+
+ if (!request_region(CONFIG_104_IDIO_16_BASE, A_104_IDIO_16_EXTENT,
+ "104-idio-16")) {
+ pr_err("104-idio-16: Unable to lock 104-idio-16 port addresses (0x%X-0x%X)\n",
+ CONFIG_104_IDIO_16_BASE,
+ CONFIG_104_IDIO_16_BASE + A_104_IDIO_16_EXTENT);
+ err = -EBUSY;
+ goto out_lock_a_104_idio_16_port;
+ }
+
+ spin_lock_init(&gp.lock);
+
+ pr_info("104-idio-16: 104-IDIO-16 GPIO detected\n");
+ err = gpiochip_add(&gp.chip);
+ if (err) {
+ pr_err("104-idio-16: GPIO registering failed (%d)\n", err);
+ goto out_gpio_register;
+ }
+
+ return 0;
+
+out_gpio_register:
+ release_region(CONFIG_104_IDIO_16_BASE, A_104_IDIO_16_EXTENT);
+out_lock_a_104_idio_16_port:
+ return err;
+}
+
+module_init(a_104_idio_16_init);
+module_exit(a_104_idio_16_exit);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("ACCES 104-IDIO-16 GPIO driver");
+MODULE_LICENSE("GPL");
--
2.4.9


\
 
 \ /
  Last update: 2015-10-01 04:21    [W:0.131 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site