Messages in this thread Patch in this message | | | From | Arun Parameswaran <> | Subject | [PATCH v2 1/5] dt-bindings: net: Broadcom iProc MDIO bus driver device tree binding | Date | Wed, 30 Sep 2015 17:16:39 -0700 |
| |
Add device tree binding documentation for the Broadcom iProc MDIO bus driver.
Signed-off-by: Arun Parameswaran <arunp@broadcom.com> --- .../devicetree/bindings/net/brcm,iproc-mdio.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt new file mode 100644 index 0000000..8ba9ed1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt @@ -0,0 +1,23 @@ +* Broadcom iProc MDIO bus controller + +Required properties: +- compatible: should be "brcm,iproc-mdio" +- reg: address and length of the register set for the MDIO interface +- #size-cells: must be 1 +- #address-cells: must be 0 + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + + enet-gphy@0 { + reg = <0>; + }; +}; -- 2.5.2
| |