lkml.org 
[lkml]   [2015]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 2/2] regulator: act8865: add DT binding for property "active-semi,vsel-high"
    Date
    Add a DT property "active-semi,vsel-high" to indicate the VSEL pin
    is high. If this property is missing, then assume the VSEL pin is
    low(0).

    Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
    ---

    Changes in v2: None

    .../bindings/regulator/act8865-regulator.txt | 3 +++
    1 file changed, 3 insertions(+)

    diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
    index e91485d..6067d98 100644
    --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
    +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
    @@ -8,6 +8,8 @@ Required properties:
    Optional properties:
    - system-power-controller: Telling whether or not this pmic is controlling
    the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
    +- active-semi,vsel-high: Indicates the VSEL pin is high.
    + If this property is missing, assume the VSEL pin is low(0).

    Optional input supply properties:
    - for act8600:
    @@ -49,6 +51,7 @@ Example:
    pmic: act8865@5b {
    compatible = "active-semi,act8865";
    reg = <0x5b>;
    + active-semi,vsel-high;
    status = "disabled";

    regulators {
    --
    1.7.9.5


    \
     
     \ /
      Last update: 2015-09-30 10:01    [W:3.598 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site