lkml.org 
[lkml]   [2015]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spmi-pmic-arb: support configurable number of peripherals
Date
The current driver implementation supports only 128 peripherals.
Adding support for configurable number of peripherals since the
spmi-pmic-arb v2 HW has sub-versions which support from 128 to 512
PMIC peripherals.

Signed-off-by: Gilad Avidov <gavidov@codeaurora.org>
Reviewed-by: Sagar Dharia <sdharia@codeaurora.org>
---
.../bindings/spmi/qcom,spmi-pmic-arb.txt | 34 ++++++++-
drivers/spmi/spmi-pmic-arb.c | 88 ++++++++++++++--------
2 files changed, 91 insertions(+), 31 deletions(-)

diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
index e16b9b5..fba7915 100644
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -42,7 +42,11 @@ Required properties:
cell 4: interrupt flags indicating level-sense information, as defined in
dt-bindings/interrupt-controller/irq.h

-Example:
+Optional properties:
+- qcom,max-peripherals : number of PMIC peripherals (same as maximum APID)
+ supported by HW. Default (minimum supported) is 128.
+
+Example V1 PMIC-Arbiter:

spmi {
compatible = "qcom,spmi-pmic-arb";
@@ -62,4 +66,32 @@ Example:

interrupt-controller;
#interrupt-cells = <4>;
+
+ qcom,max-peripherals = <256>;
+ };
+
+Example V2 PMIC-Arbiter:
+
+ spmi_bus: qcom,spmi@200f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ reg = <0x200f000 0x1000>,
+ <0x2400000 0x400000>,
+ <0x2c00000 0x400000>,
+ <0x3800000 0x200000>,
+ <0x200a000 0x2100>;
+
+ interrupt-names = "periph_irq";
+ interrupts = <0 190 0>;
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ qcom,max-peripherals = <256>;
};
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index d7119db..ae0f05d 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -47,9 +47,8 @@
#define SPMI_MAPPING_BIT_IS_1_FLAG(X) (((X) >> 8) & 0x1)
#define SPMI_MAPPING_BIT_IS_1_RESULT(X) (((X) >> 0) & 0xFF)

-#define SPMI_MAPPING_TABLE_LEN 255
#define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */
-#define PPID_TO_CHAN_TABLE_SZ BIT(12) /* PPID is 12bit chan is 1byte*/
+#define PMIC_ARB_MAX_PPID BIT(12) /* PPID is 12bit */

/* Ownership Table */
#define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N)))
@@ -84,9 +83,8 @@ enum pmic_arb_cmd_op_code {
PMIC_ARB_OP_ZERO_WRITE = 16,
};

-/* Maximum number of support PMIC peripherals */
-#define PMIC_ARB_MAX_PERIPHS 256
-#define PMIC_ARB_MAX_CHNL 128
+/* Default (can override in config) max number of support PMIC peripherals */
+#define PMIC_ARB_MAX_APID_DEFAULT 128
#define PMIC_ARB_PERIPH_ID_VALID (1 << 15)
#define PMIC_ARB_TIMEOUT_US 100
#define PMIC_ARB_MAX_TRANS_BYTES (8)
@@ -110,12 +108,16 @@ struct pmic_arb_ver_ops;
* @channel: execution environment channel to use for accesses.
* @irq: PMIC ARB interrupt.
* @ee: the current Execution Environment
- * @min_apid: minimum APID (used for bounding IRQ search)
- * @max_apid: maximum APID
+ * @min_irq_apid: minimum APID with requested IRQ (used for bounding IRQ
+ * search).
+ * @max_irq_apid: maximum APID with requested IRQ (used for bounding IRQ
+ * search).
+ * max_apid: maximum APID supported by HW.
* @mapping_table: in-memory copy of PPID -> APID mapping table.
* @domain: irq domain object for PMIC IRQ domain
* @spmic: SPMI controller object
- * @apid_to_ppid: in-memory copy of APID -> PPID mapping table.
+ * @irq_apid_to_ppid: table which keeps track of APID -> PPID mapping for
+ peripherals which IRQ was requested for.
* @ver_ops: version dependent operations.
* @ppid_to_chan in-memory copy of PPID -> channel (APID) mapping table.
* v2 only.
@@ -129,14 +131,15 @@ struct spmi_pmic_arb_dev {
u8 channel;
int irq;
u8 ee;
- u8 min_apid;
- u8 max_apid;
- u32 mapping_table[SPMI_MAPPING_TABLE_LEN];
+ u16 min_irq_apid;
+ u16 max_irq_apid;
+ u16 max_apid;
+ u32 *mapping_table;
struct irq_domain *domain;
struct spmi_controller *spmic;
- u16 apid_to_ppid[256];
+ u16 *irq_apid_to_ppid;
const struct pmic_arb_ver_ops *ver_ops;
- u8 *ppid_to_chan;
+ u16 *ppid_to_chan;
};

/**
@@ -444,7 +447,7 @@ static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
id = ffs(status) - 1;
status &= ~(1 << id);
irq = irq_find_mapping(pa->domain,
- pa->apid_to_ppid[apid] << 16
+ pa->irq_apid_to_ppid[apid] << 16
| id << 8
| apid);
generic_handle_irq(irq);
@@ -456,8 +459,8 @@ static void pmic_arb_chained_irq(unsigned int irq, struct irq_desc *desc)
struct spmi_pmic_arb_dev *pa = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
void __iomem *intr = pa->intr;
- int first = pa->min_apid >> 5;
- int last = pa->max_apid >> 5;
+ int first = pa->min_irq_apid >> 5;
+ int last = pa->max_irq_apid >> 5;
u32 status;
int i, id;

@@ -655,13 +658,13 @@ static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
if (err)
return err;

- pa->apid_to_ppid[apid] = spec.slave << 8 | spec.per;
+ pa->irq_apid_to_ppid[apid] = spec.slave << 8 | spec.per;

/* Keep track of {max,min}_apid for bounding search during interrupt */
- if (apid > pa->max_apid)
- pa->max_apid = apid;
- if (apid < pa->min_apid)
- pa->min_apid = apid;
+ if (apid > pa->max_irq_apid)
+ pa->max_irq_apid = apid;
+ if (apid < pa->min_irq_apid)
+ pa->min_irq_apid = apid;

*out_hwirq = spec.slave << 24
| spec.per << 16
@@ -794,6 +797,7 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)

pa = spmi_controller_get_drvdata(ctrl);
pa->spmic = ctrl;
+ pa->max_apid = PMIC_ARB_MAX_APID_DEFAULT;

res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
core = devm_ioremap_resource(&ctrl->dev, res);
@@ -813,7 +817,7 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
pa->wr_base = core;
pa->rd_base = core;
} else {
- u8 chan;
+ u16 chan;
u16 ppid;
u32 regval;

@@ -836,16 +840,24 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
}

pa->ppid_to_chan = devm_kzalloc(&ctrl->dev,
- PPID_TO_CHAN_TABLE_SZ, GFP_KERNEL);
+ PMIC_ARB_MAX_PPID *
+ sizeof(*pa->ppid_to_chan),
+ GFP_KERNEL);
if (!pa->ppid_to_chan) {
err = -ENOMEM;
goto err_put_ctrl;
}
+
+ err = of_property_read_u32(pdev->dev.of_node,
+ "qcom,max-peripherals", &regval);
+ if (!err)
+ pa->max_apid = regval;
+
/*
* PMIC_ARB_REG_CHNL is a table in HW mapping channel to ppid.
* ppid_to_chan is an in-memory invert of that table.
*/
- for (chan = 0; chan < PMIC_ARB_MAX_CHNL; ++chan) {
+ for (chan = 0; chan < pa->max_apid ; ++chan) {
regval = readl_relaxed(core + PMIC_ARB_REG_CHNL(chan));
if (!regval)
continue;
@@ -903,14 +915,30 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)

pa->ee = ee;

- for (i = 0; i < ARRAY_SIZE(pa->mapping_table); ++i)
- pa->mapping_table[i] = readl_relaxed(
- pa->cnfg + SPMI_MAPPING_TABLE_REG(i));
+ pa->irq_apid_to_ppid = devm_kzalloc(&ctrl->dev, pa->max_apid *
+ sizeof(*pa->irq_apid_to_ppid),
+ GFP_KERNEL);
+ if (!pa->irq_apid_to_ppid) {
+ err = -ENOMEM;
+ goto err_put_ctrl;
+ }
+
+ pa->mapping_table = devm_kzalloc(&ctrl->dev,
+ (pa->max_apid - 1) * sizeof(u32),
+ GFP_KERNEL);
+ if (!pa->mapping_table) {
+ err = -ENOMEM;
+ goto err_put_ctrl;
+ }
+
+ for (i = 0; i < (pa->max_apid - 1); ++i)
+ pa->mapping_table[i] = readl_relaxed(pa->cnfg +
+ SPMI_MAPPING_TABLE_REG(i));

- /* Initialize max_apid/min_apid to the opposite bounds, during
+ /* Initialize max_irq_apid/min_irq_apid to the opposite bounds, during
* the irq domain translation, we are sure to update these */
- pa->max_apid = 0;
- pa->min_apid = PMIC_ARB_MAX_PERIPHS - 1;
+ pa->max_irq_apid = 0;
+ pa->min_irq_apid = pa->max_apid - 1;

platform_set_drvdata(pdev, ctrl);
raw_spin_lock_init(&pa->lock);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2015-09-04 01:41    [W:0.102 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site