lkml.org 
[lkml]   [2015]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/25] powerpc/8xx: Fix vaddr for IMMR early remap
On Tue, Sep 22, 2015 at 06:50:38PM +0200, Christophe Leroy wrote:
> Memory: 124428K/131072K available (3748K kernel code, 188K rwdata,
> 648K rodata, 508K init, 290K bss, 6644K reserved)
> Kernel virtual memory layout:
> * 0xfffdf000..0xfffff000 : fixmap
> * 0xfde00000..0xfe000000 : consistent mem
> * 0xfddf6000..0xfde00000 : early ioremap
> * 0xc9000000..0xfddf6000 : vmalloc & ioremap
> SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>
> Mapping IMMR 1:1 is just wrong because it may overlap with another
> area. On most mpc8xx boards it is OK because IMMR is set to
> 0xff000000 but for instance on EP88xC board, IMMR is at 0xfa200000
> which overlaps with VM ioremap area
>
> This patch fixes the virtual address for remapping IMMR to 0xff000000,
> regardless of the value of IMMR.
>
> The size of IMMR area is 256kbytes (CPM at offset 0, security engine
> at offset 128) so 512kbytes is enough and allows to handle the EP88xC
> case (which is not 8Mbytes but only 2Mbytes aligned) the same way.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

Instead of hardcoding 0xff000000, can you use asm/fixmap.h to allocate a
virtual address at compile time?

-Scott


\
 
 \ /
  Last update: 2015-09-29 02:01    [W:0.333 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site